Equipment
1 frame for the state number
1 engine
1 control button
Unlike previous versions:
The thickness of the frame is now only 16 mm (the old frame thickness 20 mm). Changeling looks like a normal anti-vandal metal frame.
Double-layer powder coating!
More flexible and soft braided rope - a minimum of friction losses in bending the rope and even more easy installation.
Thicker and laminated rope means less friction.
Bushings and plastic guides replaced by stainless steel castors - means no rope frays at points of contact.
The vertical guides on which the moving license plate, replaced by a rail system - it means the absence of misalignment and wedge mechanism from dirt.
The cutouts on the back of the frame - makes it easy to mount the frame, even to a rounded bumper.
For more information about the License Plate Flipper Flips(Slim)
License Plate Flipper Flips - is not nothing but a plate reverses. If you have 2 license plates - a regular and a name you will not have to change them with a
screwdriver. Pressing a button and some plates were replaced by others.
If you decide to buy a License Plate Flipper Flips, you do not need to worry about the installation! This procedure does not require cutting into the bumper or the
body of the car. The mechanism, flip plates, hidden behind a removable panel. This control key is located right in the car. Button set at any convenient place.
Mechanism of Action and Design
Like all brilliant, the mechanism of action the License Plate Flipper Flips simple. As soon as you press the button, the frame is turned through 180 degrees, so that one license plate is replaced by another.
The whole structure of the device is made of metal 1 mm thick, making it difficult to dismantle the plate. From this frame to remove the license plates at times harder than plastic. The construction is designed in such a way that it can work even when fully submerged in water.
Using the License Plate Flipper Flips.
Such a device is used if the car formalized 2 license plates.
Important! This function is only valid in the countries where it is required by law.
License Plate Flipper Flips also installed on vehicles involved in various exhibitions, driving, auto shows and other sporting events. Most often it is practiced outside of public roads.
Often the License Plate Flipper Flips set for official operative cars Interior Ministry, the CIA, FSB, etc.
Attention! When installing the registration and the name of the license plate at the same time, this information should be written into the registration certificate! Remember that changing or concealing the license plate on a public road may result in administrative and even criminal liability.
On installation and operation
The mechanism frames shifter is simple enough, but the self-installation requires skill and knowledge of the intricacies of the mechanism.
Installation instructions not included because Installation is not universal and depends on each individual vehicle. Experienced master will understand how to install it directly on your vehicle.
At the same time frame requires periodic maintenance - lubrication of rubbing parts 2-4 times a month in the summer and 6-10 times a month in the winter (or more often - depends on operating conditions).
Before installation, be sure to lubricate the drive rope lubricant WD-40 sheds should be on the motor side.
Remember that the rope is a consumable item.
Please specify the conditions for customs clearance of the goods in your country.
Seller is not responsible for the additional fees collected by the your customs.