This is our PIC18F458 Chip, Hardware V1.59.

Software 120309A. It works more stable than V1.45

Shipping directly from the Polish Delivery

time is only 5 working days

OP COM Opcom For OPEL Firmware V1.59 PIC18F458 Diagnostic Tool OP-COM For OPEL 120309A CAN BUS Interface Better Than V1.45

Features:

1. Software Version: V2012/VAUX-COM 120309A, Hardware Version: V1.59

2. Language: English only

3. VAUX-COM 120309a software can suppoet For Opel& For Vauxhall from 1992 to 2012.

4. Come with PIC18F458 Chip, works more stable than V1.45.

5. There is no need to active the software, can be used directly.

6. Please don’t update it online. Or it will be damaged.

New OPCOM V1.59 Firmware 2012V Software Function:

1. It covers almost for all for Opel cars, even new cars with CAN-BUS based diagnostic, such as For Vectra-C, For Astra-H, For Zafira-B.

2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.

3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.

4. Since for Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.

PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)

5. Fault codes will be shown with all available information:

Full Fault Code Text Description:

1) Full status information (Present, Not present, Intermittent)

2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.

3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.

4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like for Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or for Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!

You can also run output tests on many controllers.

PIN6-PIN14

PIN3-PIN11

PIN1

HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps

MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps

SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps

Package list:

1pc x OP COM Interface

1pc x USB Cabl

1pc x  Software and Drivers CD