Fully tested and working. Board is of standard E-ATX form factor and will fit into any desktop PC case that supports Extended ATX boards. Supports Intel VT-d.
Supported CPU Series | Intel Xeon Processor 5500/ 5600 Series | ||
Socket Type / Q'ty | LGA1366 / (2) | ||
Thermal Design Power (TDP) wattage | Max up to 130W | ||
System Bus | Up to 4.8/ 5.86/ 6.4GT/s with Intel QuickPath Interconnect (QPI) support | ||
Chipset | IOH / ICH | Intel 5520 / ICH10R | |
Super I/O | Winbond W83627DHG | ||
Memory | Supported DIMM Qty | (18) DIMM slots | |
DIMM Type / Speed | DDR3/DDR3L 800/1066/1333* RDIMM/UDIMM | ||
Capacity | Up to 288GB at launch w/ dual rank RDIMMs | ||
Memory channel | 3 Channels per CPU | ||
Memory voltage | 1.5V | ||
Expansion Slots | Note: | use Intel Ivy Bridge CPU to support PCI-E Gen.3 | |
PCI-E | (1) PCI-E x8 slot (w/ x4 link) / (2) PCI-E Gen.2 x1 slots | ||
Recommended TYAN Riser Card | M2091, PCI-E x16 1U riser card (left) | ||
LAN | Port Q'ty | (4) | |
Controller | Intel 82574L / Intel 82576EB | ||
Storage | SATA | Connector | (6) SATA |
Controller | ICH10R | ||
Speed | 3.0 Gb/s | ||
RAID | RAID 0/1/10/5 (Intel Matrix RAID) | ||
Graphic | Connector type | D-Sub 15-pin | |
Resolution | Up to 1600x1200@60Hz | ||
Chipset | Aspeed AST2050 | ||
Input /Output | USB | (7) USB2.0 ports (4 at rear, 2 via cable, 1 type A onboard) | |
COM | (1) port (rear) | ||
VGA | (1) D-Sub 15-pin VGA port | ||
RJ-45 | (4) GbE ports | ||
Power | SSI 24-pin + 8-pin + 8-pin power connectors / EPS12V | ||
Front Panel | (1) 2x12-pin SSI front panel header | ||
SATA | (6) SATA-II connectors |
Returns not accepted if CPU socket pins are bent/damaged!
SUPPLIED WITH BACKPLATE, can also provide SATA cables for free, just please send me a message upon checkout.
Same day dispatch if ordered before 3pm weekdays. Thanks.
Please note :