| To achieve the ultimate audio performance, the AI-3000 employed discrete circuit design which allows engineers to choose the most appropriate parts to every single section of the circuit. Each circuit is designed as a monaural, to eliminate interference between signal paths of left and right channels.
Symmetric Circuit Design including Terminal LayoutInside the AI-3000, it employs symmetric circuit design and layout throughout from input section to output section, in order to equalize the signal travel distance for both left and right channels. Thanks to this design, the layout of the input/output terminals on the back panel is also symmetric which is beautiful and functional.Over-sized Semi Toroidal-core Power Transformer | To achieve the ultimate audio performance, the AI-3000 employed discrete circuit design which allows engineers to choose the most appropriate parts to every single section of the circuit. Each circuit is designed as a monaural, to eliminate interference between signal paths of left and right channels. | Extra Large Aluminum Heat Sink on both sidesThe distinctive heat sink on the both side panels exhausts heat to the outside of the unit efficiently.- Full Aluminum Body and Steel Chassis
| The AI-3000 employs extremely thick aluminum panels for front, top and sides, as steel chassis is used for back panel and bottom chassis. This robust construction contributes to eliminate unnecessary vibration by its weight, and gives an authentic appearance to the AI-3000. In addition to this, a beautifully machined aluminum volume knob is located at the center of the front panel. |
- Total 7 Audio Inputs including PHONO and 2 Balanced Analog Audio Inputs
- The AI-3000 equips total 7 analog audio inputs, including 2 balanced audio inputs, PHONO input, and line inputs for CD, Tuner, AUX and Bypass.
- 2 Pairs of Speaker Terminals
| The AI-3000 equips 2 pairs of speaker terminals for Speaker-A and Speaker-B. Each speaker terminal is a screw type which allows users to connect thick speaker cable for high-end class. |
- Remote Control with Aluminum Fascia
- A handsome remote control with aluminum fascia comes with the AI-3000. It also equips major control keys for Distinction CD Players and AM/FM Tuner.
- 300W+300W (at 4 ohms) or 200W+200W (at 8 ohms) output power with Output Protection System
- Discrete Dual Monaural Analog Audio Amplifier Circuits
- Symmetric Circuit Design including Terminal Layout
- Over-sized Semi Toroidal-core Power Transformer
- Extra Large Aluminum Heat Sink on both sides
- Full Aluminum Body and Steel Chassis
- Total 7 Audio Inputs including PHONO and 2 Balanced Analog Audio Inputs
- 2 Pairs of Speaker Terminals
- Machined Aluminum Volume Knob
- Remote Control with Aluminum Fascia
AI-3000 SPECIFICATIONSAmplifier | | Type of Amplifier | Discrete Analog Amplifier | Output Power | 300W + 300W (4ohms) 200W + 200W (8 ohms) | Total harmonic distortion | 0.01% or less | S/N ratio (input short) | 102 dB (A-weighted) | Frequency range | 10 to 30,000 Hz (-0.5 dB) | Input Sensitivity | 280 mV / 47k ohms | Audio inputs | | Balanced | | XLR 1 | XLR-3-31(2:HOT) | XLR 2 | XLR-3-31(2:HOT) | Unbalanced | | PHONO | RCA jacks | CD | RCA jacks | TUNER | RCA jacks | AUX | RCA jacks | BYPASS | RCA jacks | Audio output | | Unbalanced | | PRE OUT | RCA jacks | Speaker Terminals | | Type of Terminal | | Speaker-A | Screw Type | Speaker-AB | Screw Type | Matching Impedance | 4 to 8ohms | Power supply | AC120V, 60Hz(US/Canada) AC240V, 50Hz(UK/Europe) | Power Consumption | 570W | Overall Dimensions | 435(W) x 230(H) x 520(D) mm | Net Weight | 31.3kg | Accessories | Remote Control(RC-1288),Batteries for Remote(AAA x 2),Power Cable,Owner's Manual, Warranty Card
|
IF SHIPPING SOUNDS A LOT BECAUSE THIS THING IS HEAVY AND IT IS A LOT!!! IM SORRY but 3 times now i had to pay over what i was quoted so now i add a 20 dollar fee which includes insurance and direct signature YES IT PROTECTS BOTH OF US. NEEDED
|