1 Pair - Golden Anodized CNC with Black Hand Grips
1x Throttle Side - 1x Clutch Side - 7/8 Inch Diameter Handlebars
These grips are made of a strong rubberized material that increases grip for easy and accurate throttle control, stands up to constant abuse, and is treated to reduce UV damage. The Bar Ends are attached with Bolt and Nut and are otherwise closed ended grips. Bar Ends can be removed and replaced with others, but this would require the grip to be modified to accommodate a different Bar End application. Add these OEM Replacement grips to your bike and stand out from the others!
Check our Storefront for other choices of Hand Grip styles.
Stats:
Name: Zeus
Dimensions: Multiple, please see photo(s) for approximate measurements
Housing: Black Rubberized Compression Fit
Aluminum: Golden Anodized CNC Billet Rings and Bar Ends
Fitment: 7/8 Inch Diameter Handlebars
Install Notes: When you open the package you will notice that one grip has a larger inner diameter than the other. The larger inner diameter grip is for the Throttle side (right side), while the smaller inner diameter is for the Clutch side (left side). Remove your old grips from the handlebar. Then clean all of the glue and dirt residue from the throttle plastic and the handlebar. You will not use glue to install our hand grips because they are designed with a compression fit. To slide them on easier, we recommend using warm soapy water or glass cleaner; these liquids will evaporate upon drying. Do not use petroleum based lubricants as they will leave a slick residue, allowing the grip to slide off easily while riding. Do not use compressed air or a screwdriver to install as this could result in blowing out the side or damaging the graphics. Once applied and your happy with them you may want to install Bar Ends. If so, you will have to modify the grips by cutting the end out; by modifying you void warranty. To Start we recommend using a sharp X-Acto knife and with the grips installed, simply cut the end out using the inner wall of the Handlebars as a guide. Additional trimming may be required to facilitate proper Throttle Control with Bar Ends installed. See our Install Guide with pics HERE.
