eBay

Build the home shuffleboard table of your dreams!

These plans by are time tested and have helped many customers build their home shuffleboard table.The plans contain 8 pages of detailed information that take you from start to finish in building your own shuffleboard table. The plans include color photos to aid your build. Many of the pages also include photos for additional clarity.

GREAT SELLING PLANS - Professional Shuffleboard! From 15 years experience of building tables!

The Plans from Professional Custom Shuffleboard are step by step plans and are easy to follow and include many pictures and illustrations. You can build a 12', 14’, 16’ or longer table.

These Plans will allow you to build a top quality table - not a cheap home table like other plans.

You can build one with the theme of your favorite sports team!

If you are going to put the time into building a table - you will want a table worth thousands. Our E-Plans will allow you to make the table of your dreams. And unlike most with us you can re-print plans an often as you need. We know plans get lost and ripped, this is all to give you the best experience with us.

FREQUENTLY ASKED QUESTIONS

Q. How many hours does it take to build a table?
A. The time to build a table can vary greatly depending on the skill level of the builder and tools that they have. The following times are intended to give a rough estimate for average skill level and a typical shop.

Cradle and leg construction: 20 hours
Playing surface constuction: 15 hours
Frame finishing: 6 hours
Playing surface finishing: 10 hours
Final assembly: 3 hours

Q. How much will the table materials cost?
A. The following is a materials cost estimate. A large part of the cost difference is whether you build the maple playing surface or have someone make it for you.

Materials (Low side To Hide Side):

Playing Surface $100.00-120.00	60 bdft for frame (hardwood) $240.00-300.00	2 sheets plywood $20.00-50.00

24' of trim $20.00 To $30.00	Feet levelers $12.00	Sandpaper $10.00

Glue $6.00	Stain and Varnish $15.00-30.00	Abacus beads and paint $10.00-25.00

Carpet, #'s and stripes $40.00-80.00	Hardware $20.00

TOTAL = $493.00 To $683.00

Q. What tools are needed to build a table?
A. Building a shuffleboard table requires most of the tools found in a typical wood shop. Although I suppose a table could be built with hand tools, the following list is highly recommended:

Table saw, Miter saw, Random orbital sander, Drill / Driver and bits, Router, Various size clamps, Saw horses, Jig saw (band saw is also helpful), Tape measure, carpenters square, long straight edge, etc.

Q. What size table can be made from the plans?
A. The plans are primarily geared toward making a 16' table (mostly the images). However, the plans do have various charts within the bill of materials that allow for shorter or longer tables. Longer tables do require some changes that are discussed in the plans, but not necessarily detailed out. For example, to build a 16' table the primary change is adding a center leg. Tables that are 18' and longer are to be built as a two piece frame.

Q. Do the plans address climate adjusters?
A. For those that may not know... climate adjusters are metal devices that get bolted to the underside of the playing surface in order to compensate for table warping. Tables can warp slightly due to changing temperature and humidity conditions. Installing climate adjusters allows for the control of table warping. (almost like braces on teeth). Although the plans do not include climate adjuster instructions, they do allow for adjusters to be installed through slots that get cut into the table bed. Climate adjusters can then be purchased from our store.