Please leave a message about the color, or we will send in random. Thank you Fingertip Pulse Oximeter This Fingertip Pulse Oximeter is a kind of innovated medical device with non-invasive and continuous features for artery SPO2 and PR detection. Being portable, it is able to measure SPO2 and PR values quickly and precisely. Product Operation Scope The fingertip Oximeter can be used to measure human haemoglobin saturation and heart rate through finger. The product applies to using in family, hospital (including clinical use in internist/surgery, anaesthesia, paediatrics, intensive care, etc.), oxygen club, social medical organizations, physical care in sports (It can be used before or after sports. Operation in sport procedure is not recommended). It is also applicable to enthusiasts on mountaineering, patients (convalescents at home or those need first aid treatment), elders over 60, those work more than 12 hours, sporters and those work in the hermetic circumstance, etc. The product is not suitable to monitor patient continuously. Detail image: Display: Operation Instructions 1. Install two AAA batteries into battery cassette before covering its cover. 2. Plug one finger into rubber hole of the Oximeter (it is best to plug the finger thoroughly) before releasing the clamp with the nail upwards. 3. Press button on the front panel; 4. Donot tremble your finger when the Oximeter is working. Your body is not recommended on moving status. 5. Press the button on the front panel, if we want change display direction; 6. Read relevant datum from display screen. 7. If there is no signal input, oximeter can shut off automatically; 8. Please replace new batteries when OLED indicates the batteries are in low power. Detailed descriptions of product functions 1. Display Type:Two colors OLED display 2. with beep sound 3. SpO2:Measurement range:70~99 Accuracy:±2% on the stage of 70~99,Unspecified(≤70) for SPO2 Resolution:±1% 4. PR:Measurement range 30BPM~240BPM Accuracy:±1BPM or ±1%(the larger one) 5. Power: two AAA 1.5V alkaline batteries 6. Power consumption:below 30mA 7. Automatic power-off:the product shuts off by itself when no finger is in the product in 8 seconds 8. Dimension:62mm×32mm×33mm 9. Operation Environment:Operation Temperature:5~40 Storage Temperature:-10~40 Ambient Humidity:15%~80% on operation 10%~80% in storage Air Pressure: 70kPa~106kPa 10. Declaration:EMC of this product comply with IEC60601-1-2 standard. 11. Measurement Performance in Low Perfusion Condition:required test equipment (BIO-TEK INDEX Pulse Oximeter tester) could measure the available pulse wave with the amplitude of 6% of the simulation pulse wave amplitude. 12. Interference Resistance Capacity against Ambient Light::Device works normally when BIO-TEK INDEX Pulse Oximeter tester exerts interfering signal test. Package Content: (No battery) - 1 x Fingertip Oximeter - 1 x Lanyard - 1 x English user's manual Statement: The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for reference: If you have any questions, refer to the FDA website: http://www.fda.gov
We have enough storage of this item, if you need more than the list shows please feel free to contact with me! Larger order~ Larger discount~~ Hope this information will be useful for you. Thanks! Your satisfaction and positive feedback is very important to us . If you have any problems, please feel free to contact us firstly before open a dispute. We will do our best to solve any problems and provide you with the best after-sale service. Working time:
|