Description:

FSP300-60FAG is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 300 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.

Applications:

For standard, advanced server, NAS and industrial power system.

Features:

  • 80 Plus Gold
  • Low Ripple & Noise
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resettable power shut down
  • INTERNAL 4 cm fan
  • 100% burn-in under high ambient temperature(50℃)
  • Vacuum-impregnated transformer
  • MTBF:100K hours at 25℃
  • 100% Hi-pot tested
  • Line input fuse protection

Specifications:

Model Name FSP300-60FAG
Wattage 300W
Dimension 150mm (L) × 81.5 mm (W) × 40.5mm (H)
Product Highlight Efficiency Level 80 Plus Gold
PMBus For standard, advanced server, NAS and industrial power system.
General Specification Effciency 90% 230VAC
Voltage Regulation +3.3V, +12V, +5V, +5SB: ±5%
-12V: ±10%
PWOK Delay Time 500ms > PWOK > 100ms
Input Electrical Specification Input Frequency 47 ~ 63 Hz
Input Current 115V@ 4.0 Amps-rms maximum
230V@ 2.0 Amps-rms maximum
Output Specification Hold-up time 115V/60Hz 16.5mSec. Minimum@100% Load,
230V/50Hz 17mSec. Minimum@100% Load
Ouput Voltage Regulation +3.3Vdc output : +3.5 Vdc minimum, + 4.8Vdc maximum
+5Vdc output : +5.5 Vdc minimum, + 7Vdc maximum
+12Vdc output : +13.4 Vdc minimum, + 16Vdc maximum
Ripple & Noise 115V-rms/230V-rms 5V 20ms Maximum
Over current protection 3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
12V2:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p
Short Circuit Protection load < 0.1 Ohm
Environmental Requirement Temperature Range Operating : 0 to +50℃
Storage :-20 to +80℃
Humidity Operating : 85% to % RH, Non-condensing
Storage : 95% to % RH, Non-condensing
MBTF The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, maximum-output load, and nominal AC inout voltage.
Safety CE,FCC,TUV,UL/cUL

Output Voltage and Current Rating

+3.3V +5V +12V1 +12V2 -12V +5Vsb
Ripple-Noise(R-P) mV 50mV 50mV 120mV 120mV 120mV 50mV
Regulation Load % ±5% ±5% ±5% ±5% ±10% ±5%
Output Max.(A) 14A 16A 16A 16A 0.5A 3A
Output Min.(A) 0.3A 0.3A 0.5A 0.5A 0A 0A

Notes

  • The +3.3V and +5V total output shall not exceed 100 watts.
  • Total output for this subject power supply is 300 watts.
  • Ripple and noise measurements shall be made under all specified load conditions through a single pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 47uF electrolytic capacitor to simulate system loading.

Our Guarantee:

We stand behind our products and guarantee the full functional capabilities of all our Items. Customers are our top priority. Please contact us with any question and/or issue by emailing us.

Shipping:

Orders will be shipped within 1 business day of receiving payment unless ordered on the weekend. Weekend orders will be processed and shipped on Monday or Tuesday. The item will be shipped ups ground 1-5 business days. Alternative shipping options are available for faster deliver just contact us before making payment.

Returns:

We offer returns if the item is not as described. Contact us and we will provide you with return instructions. Buyer is responsible for all return postage.
OPEN BOX units do not apply for refunds.

Feedback:

We appreciate your business and take pride in our feedback so please contact us if you have any concerns before leaving Negative feedback. Please read the description carefully to fully understand the included items and conditions.