INTRODUCTION
The DFRduino Nano USB Microcontroller V3.1 (ATMega 328) is a breadboard ready version of the Arduino mini with integrated USB. The Nano has everything that the Diecimila has (electronically) with more analog input pins and an on-board +5V AREF jumper. The Nano automatically senses and switches to the higher power supply, so there is no need for a power select jumper.
The nano's pin layout works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). The DFRobot DFRduino Nano USB Microcontroller V3.1 (ATMega 328) can be powered via the mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Version History?v3.0 - improved the analog port pin mapping to be compatible with original Arduino Nano
v3.1 - changed the Mini USB port to Micro USB port


FEATURES
Automatic reset during program download
Power OK blue LED on the bottom
Green (TX), red (RX) and orange (L) LED
+5V to AREF jumper
Auto sensing/switching power input
Small mini-B USB for programming and serial monitor (cable not included)
ICSP header for direct program downloads
Power OK blue LED on the bottom
Standard 0.1¡± spacing DIP (breadboard friendly)
Manual reset switch


SPECIFICATION
Microcontroller: Atmel Atmega328-20AU
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40 mA
Flash Memory: 32 KB (of which 2KB used by bootloader)
SRAM: 2 KB
EEPROM: 1 KB
Clock Speed: 16 MHz


SHIPPING LIST
DFRduino Nano V3 x1




Payment
Delivery
Terms
About
If you have any questions please feel free to contact us ! Thanks.
Web:Booole.com For more further information
Email:Boooletech Yahoo email for technical support
Message:eBay message for other issues