- Object Oriented User Interface
– Exclusive to Whistler designs, features common data entry, browsing
and control methods are used for every scannable object. All are
programmed and stored in the same way.
- Menu Driven Programming with Context Sensitive Help – Each menu item provides a few lines of help text that provide assistance with programming and using the scanner.
- Scan List – functionality allows you to arrange, group and scan objects according to your preference.
- Free-Form Memory Organization –
Allocation of memory dynamically and efficiently as it is needed. This
differs from low cost and older scanners that had memory organized in
rigid and wasteful memory banks.
- V-Scanner Technology – Allows
you to save complete radio configurations within the radio, for recall
into main memory as needed in the field. Twenty one V-Scanner Folders
are provided, each capable of storing over 1,800 objects. Total memory
capacity of main memory combined with V-Scanners is over 37,800 objects.
- Skywarn Storm Spotter Functionality
– Instant access to frequencies used by storm spotter networks. You can
monitor storm conditions as they occur, and become aware of dangerous
conditions before the media or emergency management officials announce
them to the general public.
- SAME and All Hazards Weather Alerting
– Your scanner can alert you to severe weather and other hazards in the
county or counties of your choice. Your scanner can check your local
NOAA weather frequency periodically, even while scanning, and alert you
when an All Hazards alert occurs.
- Multi-System Trunking – Scans
most common trunked radio system signaling formats, including Motorola,
EDACS, LTR and P25 trunked radio networks. Both talkgroup and individual
call monitoring are supported.
- Automatic Adaptive Digital Tracking
– When monitoring P25 digital systems, instantly adapts the digital
decoder to the digital modulation format of the transmitted signal, then
analyzes the signal over 50 times each second and adapts to any subtle
changes caused by multipath or fading. No cumbersome manual adjustments
are required.
- Digital AGC – Instantly compensates for low user audio levels that are common on digital systems.
- LTR Home Repeater AutoMove –
Takes the guesswork out of programming LTR trunking systems when the
home repeater order is not known. Enter the LTR system frequencies in
any order, and the WS-1065 will automatically move the frequencies to
the proper home repeater slots as transmissions are received on the
system.
- Subaudible Squelch Decoder –
CTCSS and DCS subaudible squelch coding is processed by the same
powerful DSP chip that is used for P25 digital decoding. Provides fast
and reliable decoding of subaudible squelch signaling with squelch tail
elimination.
- Spectrum Sweeper – Quickly
sweeps the scanner’s frequency ranges for transmissions from nearby
sources. Lock out found frequencies and continue searching in the same
band.
- P25 NAC Functionality – P25
Network Access Code (NAC) is used to provide selective squelch operation
on conventional digital channels. Your WS1065 will detect the NAC that
is being used on a P25 conventional digital channel, and allow you to
program NAC codes to block transmissions that do not have a matching
NAC, including analog traffic on the same frequency.
- Alert LED – Programmable
multi-color LED can be configured to illuminate or flash when certain
objects are active. Eight user-defined colors can be specified from
thousands of possible combinations.
- Audible Alarms – Programmable
audible alarms can be configured to sound when certain Scannable Objects
are active. Can be used in conjunction with, or separately from, the
Alert LED described above.
- High Speed PC Interface – Use a
USB Scanner programming cable for full duplex mode at 6 times the speed
of previous scanner models for PC transfer and 8 times the speed of
previous models for radio to radio cloning. High speed special USB to
scanner programming cable included. Clones with another WS1040 handheld
or with another WS1065 desktop/mobile scanner.
- Real-time Signal Strength Indicator – Shows relative strength of received signals.
- DIM - Adjusts backlight from Dark, Light Off or Light
Bands Received
29–54 MHz |
VHF Lo |
108–136.99166 MHz |
Aircraft |
137–174 MHz |
VHF Hi |
216-225 MHz |
VHF, Ham |
225-406 MHz |
Gov’t, Military |
406-512 MHz |
UHF |
700 Bands |
Public Service |
800/900 Bands |
Public Service |
1240-1300 MHz |
Ham |
Included Accessories
AC Adapter, DC Cable, Telescopic Antenna, Mobile Mounting Bracket