Innovative Vacuum Bike Rack Made in the USA.
Please watch the video below
·
Holds one bicycle, up to 45 lbs /
20kgs
·
Made for roof boot or hatchback
attachment
· One heavy-duty fork mount choose between 9mm / 15mm / 20mm ( email us after order )
·
Three 15cm vacuum cups on body (210
lb / 95kg pull-strength rated each)
·
Attaches to metal, glass or
fibreglass surfaces
·
1/2-Inch-thick high-density
polyethylene (HDPE) body for strength and durability
· For more information, see carbicyclerack.co.uk
Vacuum
cups employ the force of atmospheric pressure to grip a surface: When a vacuum
exists between the cup and the surface on which it is attached, the weight of
Earth's atmosphere holds the cup in place with incredible force. Unlike suction
cups that produce a vacuum as they pull away from the surface. These bike rack
vacuum cups use a hand-actuated pump to efficiently remove air from between the
rubber pad and the attaching surface thus creating a much more reliable hold.
Because the full face of the pad is brought into contact with the surface, of
your cars roof or boot distortion is reduced, allowing the cup to be used with
very little risk of damage.
The vacuum cup's pump features
a plunger with a red line, which serves as a vacuum indicator. Introduced in
the1960's, initially for use in holding film cameras to cars this safety device
is still recognized as one of the most reliable warning systems available. A
few strokes of the plunger evacuate the vacuum pad, causing it to seal securely
to the attaching surface. When the cup is attached completely, the plunger
stops moving and the red line is hidden within the pump. A visible red line
indicates if air has leaked back into the pad, making vacuum insufficient to
use the cup. However, if the red line becomes visible while the cup is in use,
a check valve allows the user to re pump the cup without losing the remaining
vacuum.