·        1.Place the garment on a flat hard surface like a table (do not use the ironing board as this is cushioned and you will not achieve the pressure required) place the transfers down onto your garment in the order you require so they read correctly when viewing the garment.

2. Carefully place a piece of white clean paper over the transfers ensuring that your transfers do not move whilst ironing.

·     3.Set the iron to the hottest temperature for your item, and ensure you do not use any steam.

·     4.Press the iron firmly down onto the paper ensuring you do not move the iron.

·     5. Do this for 15 seconds

·     6.Remove the paper, and leave to cool for 5-10 seconds.

·     7. Slowly peel back each plastic covering leaving the transfers in place.  If the transfers begin to peel then re-iron and use more pressure.

     Please note we cannot be held responsible for any damage caused to the garments during the application process - Please be careful and take your time. 

      DO NOT WASH FOR 48 HOURS - DO NOT TUMBLE DRY ON HIGH HEAT (as with all transfers this will loosen the adhesive - a repeating the process should resolve this)