We Ship World Wide!
USA-Custom Shop 7 Sound Stratocaster: Translation- Position 1 of the 5-way selector switch activates the bridge pickup alone; by engaging the toggle switch, you will activate both the neck and the bridge pickups together. Likewise, with the 5-way selector switch in the second position and the bridge and middle pickups activated, a flick of the toggle switch adds the neck pickup to the equation.
5-way switch | pickup selections | Your 2 new selections: |
position 1 | Bridge pickup alone | bridge + neck in parallel |
position 2 | bridge + middle pickup in parallel | all three pickups in parallel |
position 3 | middle pickup alone | |
position 4 | middle + neck pickup in parallel | |
position 5 | neck pickup alone |
You'll love these HOT Vintage Pick ups with vintage style magnets!
These Custom Stratocaster Vintage HOT SRV Pick ups added give it a Stevie Ray
signature sound in any amp !!
ALSO ADDED:
The fingerboard, or playing surface of the guitar neck, is usually curved or radiused across its width. The purpose of this radius is to accommodate the natural ergonomic shape of your fingers when they are in playing position. Comfort is certainly a major factor in selecting a fingerboard radius but it is not the only factor. Musical Style... the fingerboard radius must also allow you to play the style of music you prefer.
.
Variable Treble Bleed Circuit included:
This mod keeps the tone you have on "10" throughout the entire range of the volume control.
We add a resistor capacitor network to the input and output of the volume control to
keep the highs from leaving your tone as the volume is decreased.
By adding this circuit we can help you avoid the "muddy-tone" syndrome.
Now your tone is much more controllable and articulate!
When the Treble Bleed Circuit is included:
Turning the volume control applies varying amounts of a specially tuned high frequency filter to the selected pickups. Now each pickup has the ability to produce a stronger, fuller tone and 50% less noise. On Humbuckers (either North or South or both coils can be filtered). This variable treble bleed circuit is pre-installed. This variable treble bleed/bypass circuit corrects the problem of high frequency losses, provides auto-adjustment of tone at reduced volumes and improves audio taper between 3 and 10.
OPTIONAL-Add a NEW Finished Warmoth Neck- just $325
Wood and Finish | Maple-Satin Nitro Lacquer finished |
---|---|
Orientation | Right Handed with standard Strat or Telecaster Headstock-your choice! |
Nut Width | Your Choice |
Nut | White Corian or Black tusq-your choice! |
Back Contour | Standard thin or your choice |
Frets | 6105 Stainless Steel Frets or your choice |
Radius | 10-16" Compound |
Inlay | Black Face Dots |
Scale | 25-1/2 or 24-3/4" |
It allows you to roll off your volume without losing the highs.
As you turn your guitar's volume down, the pot allows some of the current to go to ground as opposed to the output.
The frequencies that leave first are the highs, which leave the tone muddy and obscured without an "edge" on it to a discerning ear.
Avoid this by using our:
Haywire Treble Bleed Circuit
When you lower your guitar's Volume control so does your tone's clarity. Your tone is now muddy & with too much bass.
By adding a Haywire Treble Bleed Circuit to your Volume Control Pot,
your guitar will "Bleed" in more Treble as you turn your volume down.
Now you have much cleaner, articulate tones when rolling down the volume control.
It allows the treble frequencies to be re-introduced into the output for clarity and improved timbre.
At Haywire we simply install a TB Circuit capacitor. We build them in our custom guitars for a better Low and High sound spectrum:
1-error-correction of signals with enhanced clarity
2- preserve high end frequencies
3-improved taper when rolling back your volume control
Treble Bleed Circuit Mod
More about this on the Haywire Website
Haywire Custom Guitars
"Building satisfied players one Haywire Custom guitar at a time!"
* Great Tone and SustainSellebrity Analytics