BRAND NEW CUSTOM BUILT EXTENDED CHASSIS
AXIAL SCX10 GMC TOP KICK DUALLY
ROCK CRAWLER 4WD DIFF LOCKED
CHASSIS HAS BEEN LIFTED WITH ALL METAL ROCK CRAWLER PIGGY BACK 120MM SUSPENSION
UPGRADED METAL DRIVE SHAFTS- EXTENDED CHASSIS BY 7"-MAXIMUM AXLE ARTICULATION
MONSTER 2.2 WHEELS/TIRES
2.4GHZ RADIO-8.4V 3300MAH BATTERY-3 HOUR CHARGER
EVERYTHING IS INCLUDED, CHARGE AND PLAY
-TRUCK 100% ASSEMBLED LIKE PHOTO-
.4GHz RADIO FOR WORR
Y-FREE DRIVING
The
AX-3 2.4GHz transmitter is a two channel, pistol grip radio with servo
reversing switches for steering and throttle, trim dials for fine tuning
steering and throttle centers. The battery indicator light also lets
you know when your transmitter batteries run low.
3-CHANNEL 2.4GHz RE
CEIVER
The
AR-3 2.4 GHz receiver uses no crystals so you'll experience worry free
driving with no frequency conflicts. This lightweight, compact, and bind
button equipped receiver with LED indicator makes setup easy!
AE-2 ESC WITH DRAG BRAKE
The
Axial AE-2 ESC was developed in partnership with Castle Creations and
features LiPo cutoff, drag brake for tough crawling situations, a Tamiya
style plug connector and is programmable via Castle Link™ (Castle Link™
not included).
TRANSMISSION
The
transmission was designed to place the weight of the motor as low as
possible to maintain a low CG (Center of Gravity). The ultra compact
transmission doesn't compromise performance because it also allows for a
wide range of gearing choices. The overall ratio can be adjusted from
15:1 all the way up to 74:1 using different pinion/spur gear choices
which allow for super high speed or to competition level crawling speed.
SLIPPER CLUTC
H
The slipper
clutch allows the motor to work more efficiently and greatly enhances
the durability of the drivetrain allowing the transmission to slip in
hard binds.
27T MOTO
R
The Axial 27T
motor supplies plenty of power for high speed trail runs or powering
over obstacles. Tear up the terrain indoor or outdoors. Easy operation:
no tuning, no fuel, no loud exhaust noise. Just plug n' go!
4-LINK REAR SUSPENSION
The
suspension geometry utilizes a 4-Link design for the rear which is
optimized to reduce axle steer and torque twist. It also helps with
steep off-camber climbs by having the proper amount of anti-squat and
roll characteristics. The 4-Link system also aids against suspension
wrap-up in high power applications.
WB8 WILD BOAR™ DRIVESHAFTS
The
WB8 Wild Boar™ driveshafts are a constant velocity joint design [CVJ]
which allows for efficient, friction free movement. Full metal-to-metal
construction for the CVJ housing makes them durable. They're also easy
to assemble and maintain!
METAL FRAME CHASSIS
The
realistic high strength c-channel chassis frame is made of durable steel
with cross bracing for reinforcement and is held together with all hex
hardware. Realistic looking frame and cross braces improve chassis
rigidity (torsional stiffness). Realistic shock hoops with multiple
shock mounting positions allows you to adjust your suspension for
maximum performance. The simplified design makes maintenance and
assembly quick and easy. The contoured skid plate significantly reduces
hang-ups on terrain.
XLES - PROVEN DURABILITY
The
axles have been designed with many features that are not available from
other products on the market. Everything from the axle strength, pinion
angle, caster, and ground clearance were taken into consideration when
designing these axles. The result is a far superior axle that will stand
up to some severe punishment. To ensure added longevity from the start a
hi-tolerance sintered diff locker is included along with hardened axle
shafts
Length: 21.2 in, Width: 9 in, Height: 9 in, Wheelbase: 12.3 in, Ground Clearance: 3.7 in, Weight: 4.7 lb
FEATURES:
- Chassis: Rigid steel C-channel, tapered for increased articulation and added realism, with rock sliders and plastic bottom skid plate to help guide vehicle over difficult terrain
- Drive: Four wheel shaft drive with WB8 Wild Boar system
- Diff Lockers: Included in front & rear axles, one-piece sintered metal design adds weight where needed in axle and reduces slop in drivetrain by eliminating a cross pin
- Shocks: Icon Vehicle Dynamics with polished aluminum bodies, precision machined POM/thermoplastic pistons, titanium nitride coated shafts and dual rate springs
- Suspension: 4-link rear reduces axle steer and torque twist, machined aluminum lower suspension links to reduce flex
- Transmission: Ultra compact for low center of gravity, adjustable gear ratio from 15:1 to 74:1 using different pinion/spur gear choices, full ball bearings and slipper clutch
- Bumpers: Poison Spyder Rock Brawler with functional D-rings for realistic recoveries and mounting holes for LED lights (not included), rear bumper has swing out tire carrier
- Ball Bearings: Full set enclosed Spur Gear: Plastic 48 pitch, 87 tooth Pinion Gear: Steel 48 pitch, 14 tooth
- Warranty: Axial warrants this kit to be free from defects in material and workmanship when new in the factory sealed box. This warranty does not cover damages due to normal wear and tear, failure to perform routine maintenance, error of assembly or installation, modifications, or addition of aftermarket or optional parts. This warranty lasts as long as the original purchaser owns the product, and is not transferable. Axial provides a ten day warranty from the date of purchase on electronics (i.e. servos, ESC, radio). All warranties are handled directly by the manufacturer.
- Vehicle;
- Length: 21.25" (540mm)
- Width: 9" (229mm)
- Height: 9" (229mm)
- Wheelbase: 12.3" (313mm)
- Ground Clearance: 3.7" (68mm)
- Weight: 3.4lbs (1.54kg)
- Gear Ratio: 47.80:1
- Body;
- Length: 17" (432mm)
- Width: 7.7" (196mm)
- Height: 4" (102mm)
- Thickness: .040" (1.5mm)
------------------------------------------------------------------------
FAST DELIVERY WITH TRACKING
USA SHIPPING $19.75
CANADA SHIPPING $44.75
WORLDWIDE SHIPPING $69.75
SHIPPING INCLUDES STRONG BOX, PACKING BUBBLE WRAP, PACKING FOAM
TRACKING AND INSURANCE
INTERNATIONAL SHIPPING INCLUDES CUSTOMS DOCUMENTS , GIFT VALUE, TRACKING , INSURANCE
