It's so Simple!:
- No need to open your PSP console.
- No need to upgrade or downgrade your PSP console firmware.
- No need to mess with the internals of the PSP and void your warranty.
- No need to change your PSP's screen.
The PSP-TV Adaptor clips neatly to the top of the PSP, and requires NO internal modification to the console. Within seconds, your PSP games, UMD Movies, Music and Photo's are displayed on your TV!
Use the PSP-TV Adaptor with your PSP to play your PSP games and movies on any big screen TV or even a projector!
The installation of PSP-TV Adaptor is very easy, simply clips the PSP-TV Adaptor on PSP console, connect the AV connectors and the video will display on any television. No tools are required, you don't need to open the PSP to install and it won't void your warranty. PSP-TV Adaptor is truly Plug'n Play, users will be playing their games/movies on the big screen in seconds.
|
|
Apparently it is just not much fun to get muscle cramps, headaches, and eye spasms while watching a blockbuster film in the palm of your hand. You just cannot compare a 3 inches display to 63 inches or perhaps even 123+ inches with an inexpensive LCD projector. Wouldn't it be much better to share the entire PSP experience with a room full of people?
Some game titles such as GTA Liberty City Stories, are designed only for PSP, and would not normally be allowed to be seen on the big screen. But now, you can experience these PS2 quality games on a large TV screen with PSP-TV Adaptor! |
NO SPECIAL TOOLS REQUIRED! NO NEED TO OPEN YOUR PSP! DOES NOT VOID WARRANTY! SIMPLY PLUG-AND-PLAY!
Installation of PSP-TV Adaptor is as Easy as 1, 2, 3!
|
1 |
Clips the PSP-TV Adaptor onto the PSP console |
|
2 |
Connects the audio cable and power cord from PSP-TV Adaptor to PSP console. |
|
3 |
Connects the PSP 's A/C adaptor to PSP-TV Adaptor and connects the Video/Audio Cable from PSP-TV Adaptor to TV Monitor...and that's it! |
PSP-TV Adaptor is now ready! With PSP-TV Adaptor, enjoy the PSP Gaming experience with Bigger Screen ! |
|
Instructions for the PSP TV Adaptor
A. Overview:
The PSP TV Adaptor reflects the graphics on the PSP screen to the optical lens and translates the graphics into a digital signal. The digital signal is then read by the TV so that you can play your PSP with any large screen TV or Monitor.
To enhance the display quality, there are two optional display modes for different usages: Game Mode and Movie Mode. You can also choose one of the modes to suit you best when gaming and movie are performing at the same time.
For easy installation, there are clips to connect the adaptor with PSP. You could also use the original AC adaptor for the power input of the PSP TV Adaptor.
B. Operation:
1. Choose the video mode with the switch at the bottom of the PSP TV Adaptor to match the mode which your TV is using, i.e. switch to NTSC if your TV is in NTSC mode.
2. Choose the display mode with the switch at the back of the PSP TV Adaptor to the one you prefer to use: Game mode or Movie mode.
3. Put the PSP TV Adaptor on the middle of PSP. Make sure the clips are fixed on the two screw holes at the back of the console.
4. Insert the plug of the power cord of the PSP TV Adaptor to the PSP power adaptor port.
5. Insert the plug of the Audio cable into the audio output port of the console.
6. Plug in the AV cable into the console AV output ports according to the colors of the plugs. The yellow one is for video. The red and yellow ones are for left and right audio channels respectively.
7. Plug in the original power adaptor into the DC input port of the PSP TV Adaptor.
8. Power on the PSP TV Adaptor by pressing the on/off button on the top of it.
9. Adjust the focus wheel on the top of the PSP TV Adaptor to the clearest display.
10. Adjust the brightness wheel on the left of the PSP TV Adaptor to suit your TV.
C. Specifications:
Sensor Pixel Array |
514 x 484 |
Pixel Size |
7um x 5.6um |
Image Area |
3.6mm x 2.7mm |
Optical Format |
¼” |
Clock Frequency |
54MHz |
Exposure Time |
Color NTSC: 1/60s –1.49us
Color PAL: 1/50 –1.875us |
Dark Current |
0.3nA/ cm2 |
Saturation Level |
0.81V |
Signal-to-Noise Ratio |
42dB |
Spurious-Free Dynamic Range |
52dB |
|