Battery pack fr HILTI 15.6v 15.6 volt SFB150 SFB155 SF151-A SF150-A 3.0AH TOPEND
This pack has the top end so it will be much easier for installation then the one doesn't have.
  • PLEASE READ BEFORE YOU ORDER
  • 1.Do you have Soldering Iron and know how to solder?
  • 2.Do you know this repacking pack does NOT come with battery case and terminals?
  • 3.Did you open the battery case and figure out how to solder terminals on to new pack?
  • If all answers are YES, please go to page top and place an order, thank you.
  • FIT MODEL:
  • Battery pack for HILTI 15.6V SFB155 SFB150 SF151.
  • We will send instruction to you after you place the order.
  • We use brand new 3.0AH cells to replace and recycle the old cells.
How to replace it
 
1. Take the 2 temp sensors out from the original pack.? 2. Desolder all of wires from this position
 

3. Pry the contact off from + polarity.

4. Take the terminal assembly out
 

5. Tin the + contact.

6. Solder the 3 wires back to new pack
 

7. Cut the left side leg of the fork to use it as a bridge for next step.

 

 

8. Solder the bridge to connect the contacts together. Please make sure all wires at good position before you put this new pack into the housing,?THERE IS NO EXTRA SPACE FOR WRONG WIRE LAY OUT.
  • Battery Packx1