This is a new Hydragas or Hydroelastic suspension pump (Revision 2) with rubber seals and now piston nose sealing, to suit liquid pumping, complete with 600 psi (approx 40 Bar) pressure gauge mounted on stainless steel fittings and 1 metre of high pressure hose with special angled adaptor, enabling easy access to the re-pressurisation points.

The pump is built for hydragas suspension fluid and will also work well on antifreeze mixture, as this is a recognised alternative to reset the vehicle suspension height.

The unit is suitable for all cars using the standard Schrader inflator connections as found on Metro, Allegro, Austin 1100/1300, MGF and a variety of other Rover and Leyland vehicles. This unit is very suitable for MGFs, see feedback for customer comments, see below for link.

The pump is provided with an instruction sheet to guide its operation and use, enabling the car owner to adjust and repressurise vehicle suspension systems, with guidance as to fluid type.

The pump unit displaces a relatively small volume of fluid but at a very high pressure ensuring fluid is properly supplied to the suspension system. Ride heights must be set according to manufacturers data, which is widely available.

Please note the unit does not generate vacuum, which is not a problem when correcting low or sagging suspension heights as any trapped air can easily be vented through other suspension components.

If you need this pump fitted with a "low loss connector" please see my other listing and email me for a combined price.

Also see our high pressure valve cores, which suit a 400 psi working pressure and are much more reliable than tyre valve rated cores for these systems

Garages will tell you it can only be done by them with specialist very expensive equipment, NOW you can do it yourself.

Please read all of my feedback as it refers to these pump units.

Please request post and packing costs if you wish to purchase from overseas, Europe is typically £17.50, Australia £27, USA/Canada £30 please ask for a specific postage cost. All International sales are sent by recorded "signed for" first class delivery. Note, we now despatch in postal tubes to all destinations, so the postage costs include the packing materials which also provides a useful re-usable tool storage container to keep the tool clean and safe in the future.

Despatch times stated below are the maximum likely, we will do our best to despatch much quicker where possible.