This is a new Hydragas or Hydroelastic suspension pump "Low Loss Connector" to suit liquid pumping, complete with adaptor to 1/8 BSP, and 4mm OD tubing connector tested at 400 psi (approx 30 Bar). The handle allows the Schrader valve fitted within the suspension refill point to be opened enabling system discharge or repressurisation using a suitable pump.

This auction is for the connector ONLY without pump or connection tubing, which is shown in the photograph to illustrate its use.

Please email me if you wish to use this with one of our low cost suspension pumps as a kit of conversion parts is available allowing use of this low loss connector and also providing a bleed/vacuum connection point if required.

If you buy this low-loss connector together with our low cost pump we will supply a special version of our pump which has bleed/vacuum connection point, and double check valves. Note, this special pump will only be supplied with this low-loss connector and not our standard Schrader adaptor.

Please request post and packing costs if you wish to purchase from overseas, Europe is typically £10, Australia £14, USA and Canada £19 please ask for definite postage cost. All international sales are sent by recorded delivery.

Also see our high pressure valve cores, which suit a 400 psi working pressure and are much more reliable than tyre valve rated cores for these systems

Despatch times stated below are the maximum likely, we will do our best to despatch much quicker where possible.

Please note, designs may vary slightly due to manufacturing requirements.

We have available adaptors to suit Churchill 8mm nylon pipe, please email for details.