Product Description:
Standard 5-wire/pin starter ignition key switch  for Jiangsu Jiangdong, All Power America, Gentron & Steele Products Branded Diesel Generators Powered by a 170FE, 178FE, 178FAE, 186FE or 186FAE Engine. It operates under "ON/RUN", "OFF/STOP" & "START" manually.
 
3-wire or 3-pin switch is also used in some models. It only uses three of 5 wires in our 5-wire ignition key switch: C, D & E.  Please refer to Wiring Connections Section B for 3-Wire Ignition Key Switch.

Quality Product with Prompt Shipping & Solid After Sales Support! All our orders are shipped out of Atlanta, USA and EDT is about 1 to 3 business days for delivery in most areas of continental states.

Packing Contents: 1 X 5-Wire Ignition Key Switch + 2 X Keys.


Part Number:
EZ-JD6500SE-IKS01.

Wiring Connections:
        A) 5 or 6-Wire Ignition Key Switch:



Vehicle Electronic Connector DJ7061-6.3-11 or DJ7061-6.3-10 
 
5-Wire or 3-Wire Ignition Key Switch Combinations
  • A: Yellow Wire, to the NEGATIVE POLE of an oil pressure sensor; the negative pole is directly grounded to the engine case for a single pole sensor and the top electrical contact for a two-pole sensor, respectively.
  • B: Black Wire, to the POSITIVE POLE of an oil pressure sensor; the positive pole is the top electrical contact for a single pole sensor and the side electrical contact for a two-pole sensor, respectively.
  • C: Grey or Green Wire, to the output of 12V voltage stabilizer for battery charging.  Note: 12V voltage stabilizer is also called 12V voltage regulator, 12V bridge rectifer or 12V manostat. It is usually installed underneath a starter motor.
  • D: White Wire, to the POSITIVE POLE of DC 12V battery.
  • E: Red Wire, to the terminal pin of a starter motor solenoid.
  • F: BLANK.
Special Note: Different color wires may be used for different brand 5-wire ignition key switch. However, they are ALL wired at the same order and completely interchangeable, e.g., some ignition key switches are used with the following color wires:
A: Green Wire, B: Black Wire, C: Yellow Wire, D: Red Wire & E: Brown Wire.

        B) 3-Wire Ignition Key Switch:
        3-wire ignition key switch only uses three of 5 wires in our 5-wire ignition key switch: C, D & E.  If your ignition key switch has the same 6-hole connector as ours, you need to do nothing about rewiring, just hook up our 5-wire ignition key switch and it will let you go! If your connector is different from ours, you need to rewire it as follows for fitting your generator:

1) Your fuel pump has no fuel shutoff solenoid.
  • C: Grey or Green Wire, to the output of 12V voltage stabilizer for battery charging.  Note: 12V voltage stabilizer is also called 12V voltage regulator, 12V bridge rectifer or 12V manostat. It is usually installed underneath a starter motor.
  • D: White Wire, to the POSITIVE POLE of DC 12V battery.
  • E: Red Wire, to the terminal pin of a starter motor solenoid.
2) Your fuel pump has a fuel shutoff solenoid.
  • C: Grey or Green Wire, to the fuel pump solenoid.
  • D: White Wire, to the POSITIVE POLE of DC 12V battery AND to the output of 12V voltage stabilizer for battery charging.  Note: 12V voltage stabilizer is also called 12V voltage regulator, 12V bridge rectifer or 12V manostat. It is usually installed underneath a starter motor.
  • E: Red Wire, to the terminal pin of a starter motor solenoid.
Shipping:
We ship worldwide. Please contact us  and confirm international shipping & handling fee for shipping out of USA before you place an order with us.

Warranty:
We warrant our PRODUCTS against manufacturer defects in materials, workmanship and finish under normal use and service for three (3) months from the original date of purchase. Please retain the dated invoice as evidence of the date of purchase. You will need it for any warranty service.

Return:
If you are not satisfied with our items and want to return to us, please contact us for a Return Material Authorization (RMA) number within 30 days of receipt before you arrange for return. We DO NOT accept any return without EMA number. Non-authorized returns will be refused and sent back to YOU at your cost.

Customers are responsible for all return shipping charges incurred. Shipping and handling fee is NON-REFUNDABLE under any circumstances.

Payment:
We  take credit card payment for domestic customers in USA only. Payment through Paypal is also acceptable.

For international customers, we only take credit card payment through Paypal.

Thank you for the interest in our products , welcome to coming and taking a look next time.