This is 

PARROT  REMOTE CONTROL FOR MKi9000/ MKi9100/ MKi9200



 BRAND NEW, 2 YEARS WARRANTY

Battery not included



Parrot MKi series sets a wireless control console / remote control to operate the system. This is a very convenient solution, especially since it can be mounted on the steering wheel or in any place.




The remote control is powered by a lithium battery that lasts up to five years of work.



In addition to the buttons for answering and ending a call has multifunction knob to navigate the menu system, and buttons to control the music playing function.

Features wireless console:

  •      Green button: answer a call, call voice recognition
  •      Red button: reject, end talks
  •      Multi-function knob: volume control call volume control music playback, menu navigation
  •      Center bottom button - play, stop playing music
  •      Lower right: next track
  •      The lower left: previous track

MKi series is set:

     MKi9000
     MKi9100
     MKi9200

On this auction you are buying a console / remote control manufacturer PARROT SA for hands-free MKi series.

To pilot work to be postponed from the previous battery or purchase a new CR2032. The pilot must be inserted into the possession of mounting accessories derived from a set and mounted on the steering wheel or dashboard.


For proper operation of the remote control is required CR2032 battery.                       

     Pull the remote control out of the holder
     Pull the battery holder on the bottom of the remote control
     Insert the battery type CR 2032
     Insert the fitting with a new battery in the remote control


HOW TO PARRING REMOTE CONTROL

1. Make sure the battery is correctly positioned before inserting it into the

remote control .


 

 

2. If the remote control doesn’t seem to be associated to the electronic box

while using the Parrot MKi9000/9100/

 


Press & Hold all 3 buttons marked in red.

 

 

 

 

 

After verifying the CR2032 battery is properly inserted in the remote unit, press

and hold the 3 marked in red buttons. This has to be done when you see the

"Parrot MKi9100/9000/9200" Logo on the display screen. Within 1 to 2

seconds, you should then see a “Pairing Remote Control” message displayed on

the screen. At that time, you can release the buttons and the remote should

then be paired with the kit and the message will go away. You can verify

remote operation by navigating through the menus.

If you are unsuccessful on the first attempt, power off the unit until you see the

“Goodbye” message, power it back on, and repeat the process.