Beautiful Table Surface, Great Sounding Head
Digital Readout (DRO), Power Table Feed
Hard Chromed and Ground Ways
Late Model 3 HP Seiki-VS, Model 3VH, Knee Type Vertical Milling Machine w/ 10" X 50" Table. It Has Hard Chromed and Ground Ways and a Clean Table Surface, and a Bijur One Shot Lubrication System. Further, It Is Equipped With a Newell Sapphire Digital Read Out and a Servo Power Table Feed.
The following machine tool is now available for your inspection (under power) and purchase at our warehouse in beautiful downtown Miamisburg, Ohio. An "Excellent", Seiki-VS Model 3VH, 3 HP, Vertical Knee Type Variable Speed Milling Machine w/ Hard Chromed and Ground Ways and Clean Table, S/N 9280, New in 1997. It has Hard Chromed and Ground Dovetail Ways (Some Wear but in Good Shape. Look at Those Photos.). Equipped with Newell Sapphire Digital Readout on the "X" & "Y" axes, Power Feed on the Table Travel, and a Bijur One Shot Lubrication System. It has an excellent table surface. The head of this Seiki-VS is as quiet as the day it was new. It is vibration free in the entire RPM range, both in direct drive and back gear. Spindle speeds are infinately variable from 60 RPM to 4200 RPM. The spindle nose is R-8 taper. The table size is 10" X 50". Table Travel is 36", the Saddle Travel is 16", and the Power Quill Travel is 5" plus 16" of Knee Travel. Electrical requirement is 220V/440V/3PH/60CYC, presently operating on 220V. It weighs 2,650#
| Specifications: | 3VH 10x50 |
|---|---|
| Table size | 10x50" |
| X Axis travel | 36" |
| Y Axis travel | 16" |
| Z Axis travel (quill travel) | 5" |
| Vertical knee travel | 16" |
| Dia. of quill | 3-3/8" |
| Spindle RPM | 60-4200 |
| No. of spindle speeds | Inf. Var. |
| Taper of spindle nose | R-8 |
| Spindle motor HP | 3 |
You can see this very fine machine tool under power at our warehouse in beautiful downtown Miamisburg, Ohio by calling Andy or myself (see phone numbers below) for inspection. This is a Seiki-VS Model 3VH, Vertical Knee Type Milling Machine built with quality in Taiwan. Overall, a "Great Operating, Great Looking" milling machine with a fine head, hard chrome dovetail ways, very clean table surface, great screws and nuts, Digital Readout on "X" and "Z" Axes, Power Table Feed, Bijir One Shot Lube, with everything working as it should. The appearance speaks for itself (see photo's). If you need an real good, late model, 3 HP Vertical Knee Type Milling Machine, don't pass up this opportunity. You will have no regrets if you buy this machine. An excellent, solid, vertical toolroom milling machine MADE WITH QUALITY IN Taiwan.
We believe the new owner of this Seiki-VS Model 3VH, 3 HP Vertical Knee Type Milling Machine will be very happy with it.
We invite you to check our eBay feedback and you’ll understand that we properly describe our items. The condition we state an item is in, is the way it will be when we ship it. We will load, free of charge on any truck or trailer. Skidding fee, if you require it is $92.50 on this item. A full crate is $439.00. Those are the prices we have to pay. We make no profit off of skidding or crating. If you contract with a flatbed or step deck hauler, neither skidding nor crating is necessary. You always buy with confidence at Machine Tools of America. First of all, our descriptions are as accurate as we can possibly make them, and we've been describing equipment for longer than we care to admit. Secondly, we offer our customers a 30 day, freight prepaid, full refund return privilege on everything we sell, unless otherwise specifically stated. If you’re not satisfied that this item is as we represented it to be, send it back to us and we’ll refund what you paid us. Every item we sell, unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse (515 Kercher St., Miamisburg, OH 45342). We request that the successful buyer contact us within 72 hours from commitment to purchase and pays in full for their purchase within 7 days, whether or not they have picked up their machine. We will store your purchase, free of charge, for a reasonable length of time, if time is needed to arrange for shipping. We accept Company Checks, Personal Checks, Bank Checks, Certified Checks, Bank to Bank Wire Transfer, PayPal, or even Cash.
We are:
Machine Tools of America and you can contact us by phone: Bruce at 937-545-8475 or Andy at 937-604-6031. Our fax is 937-866-6668 or 937-866-8514 and the office phone is 937-866-8334, but we’re seldom there.
For ground shipping on flat bed, single drop deck, or double drop deck trailers, we recommend you contact the following: White Brokerage, Inc.; toll free phone number 877-922-4212 (ask for Reenie), A&P Freight Services; toll free number 800-628-6419 Ext 225 (ask for Paul), Best Ways Brokerage Inc.; toll free number 800-426-1220 (ask for Mark), Fastway Transport, Inc.; toll free number 800-817-2381 (ask for Chris). All four (4) of these companies are located in northwestern USA and are very adept at organizing partial capacity shipments at favorable prices to anywhere in North America.
Inform them that they will pick up your machine at Machine Tools of America’s warehouse at 515 Kercher St., Miamisburg, OH 45342. The Seiki Mill will weigh approx. 2,650# and occupy 5 1/2’ of bed space. Further, inform them that it needs to be tarped.
On May-09-09 at 01:59:51 PDT, seller added the following information:
SquareTrade © AP6.0