AccuSpark™  Distributors 

This is a Brand new  original style Lucas 25D4 type Electronic  Distributor 
Comes with a side entry cap 

Suitable all  1098cc and 1275cc MG Midget Models
negative earth only 






Callers always welcome at our shop . Junction 6 M1 ,21a M25

01727 768752


The  AccuSpark® Distributor comes ready fitted with the AccuSpark® electronic ignition module . 
This is a quality item and we have fitted dozens of units in our own workshop
This gives excellent all round performance with notable gains
The Hall effect trigger and module give better spark voltage improving starting , tickover , and MPG .

COMES FITTED WITH RED ROTOR
Developed  and designed by Distributor Doctor 
Recently manufactured rotor arms have been failing because the typical "mix" used in the injection moulding nowadays contains more carbon blacking and is therefore more conductive. Still more importantly, the rivet which holds the brass inlay into the moulding is slightly longer than the original, bringing it too close to the spring clip on the underside. The high tension current, averaging 30,000 volts, is always looking for the easiest route to earth and shorts out from the tip of the overlength rivet, through the reduced thickness of more conductive plastic and the spring clip on the underside of the rotor arm, to earth out down the distributor shaft. Result - no sparks at the plugs. The situation sometimes rectifies itself on cooling, but then reoccurs with increasing frequency until the rotor permanently short circuits.

Modelled on the original, dependable 1960’s design, but made from modern materials on the latest machinery to very close tolerances.

These LUCAS STYLE RED ROTOR ARMS will not let you down.

The integrally moulded brass inlay dispenses with the troublesome rivet used on most versions which is known to short circuit.

The increased insulation properties of the body makes them suitable for use with high voltage coils & electronic ignition kits.

The spring steel clip on the underside, in conjunction with a revised internal tolerance assures a really snug fit, even on old & slightly reduced diameter mountings.


Distributor Doctor © 2010






    






    
  

NOTE INTERNATIONAL CUSTOMERS

Standard International post is by Royal mail small packet . Delivery time is normally 2-7 days
On some occasions this it has been known to take 3-4 weeks . This is out of our control and  as often the 
problem is with postal service of the destination country items cannot be treated as lost for 1 month 

If item is required Quickly we offer FedEx 
Most of Europe £20.00
USA and Canada £25.00
Australia £27.00
Please email First for Price .