M350 Universal Mini-ITX enclosure  
 
New! M350 Universal Mini-ITX enclosure 

 
- Also availabe with PSU kit
- Smallest, Universal mini-ITX Enclosure
Fanless, natural convection design
- Fits Intel stock CPU heatsink
- Hidden area for USB / WIFI / Storage 
- Smart front power button
VesaDIN-RailWall Mount options
SMA antenna hole
- Up to two 2.5" drives, **one HDD bracket included**

 (additional mounting bracket)
- Size 192 x 210 x 62mm 
- Volume (L) = 2.5L
- Area for custom OEM logo

- Superior RFI shileding capabilities


The Swiss Army Knife of Embedded mini-ITX Computing

Zero noise, small footprint and low power

The M350 is Industry's smallest universal enclosure (192 x 210 x 62mm , 2.5L) capable of housing mini-ITX boards ranging from tiny Atoms to fully featured desktop or mobile CPUs. The M30 permits fanless operation (natural air convection via hundreds of tiny holes) for TDP < 10 watts and CPU-only fan for TDP <= 65watts. 


Equipped with hidden (but not shielded) USB docking station for WIFI / 3G / Bluetooth or simply USB flash booting, the M350 is the only enclosure that provides such innovative USB, radio friendly, expansion methods. For internal miniPCI cards or modules, and high gain SMA antenna option is provided on the back of the case.

Multiple bracket options, one bracket included.

Multiple Mounting Options:
The M350 enclosure features multiple mounting options, making it ideal for industrial applications. 
Mounting options include: 

Vesa mounting (attach in the back of a monitor)
DIN-RAIL mounting (vertical and horizontal)
Wall mount brackets
- Rubber feet


Pushing mini-ITX to a new level of miniaturization:
- An optional I/O bracket + PCi riser permits mounting of standard PCI card on top of the Intel D945GSEJT motherboard allowing customers to pack more I/O in a very small footprint (2.5L), a feature not available in any other mini-ITX enclosure.

Smart Power Button:
The M350 power button can be disabled by means of removing a jumper, thus preventing accidental ON/OFF actions. An additional jumper activates an "always ON after power loss' automatic pulse generator that will startup your motherbaord every time power is applied, regardless of BIOS setting!

NOTE: Additional fans can be installed on the hard drive mounting brackets or in the front of the enclosure. 

The M350 is Industry's smallest universal enclosure capable of housing mini-

ITX boards ranging from tiny Atoms to fully featured desktop or mobile CPUs.

The M30 permits fan less operation (natural air convection via hundreds of tiny 

holes) for TDP < 10 watts and CPU-only fan for 

TDP <= 65watts.

Required tools

In order to install the M350 you will need a Phillips screwdriver.


Installation steps

1. Install I/O motherboard shield on the back of the M350 enclosure.

NOTE: This shield is not part of the M350 enclosure; it is usually delivered by 

the motherboard manufacturer.

2. Install the motherboard on the base plate using four M3 screws (provided in 

M350 package) pictured below.

3. Connect the ON/OFF and Power LED cables (J3) to the motherboard using 

the cable harness provided with the M350 enclosure,

 Also, you can connect the USB header (J2), if needed.


Installing USB devices under the front plate

Face plate is designed to conceal USB flash drives, Bluetooth, USB WIFI 

modules or other USB devices.

If you want to add an USB device under the front plate, remove it by carefully 

pressing outwards and gently pushing, one by one, the plastic lids from the 

sides


Near the front USB connector there are 2 jumpers (pictured below) which 

are used to customize how the computer will start.

JP1: Disable On/Off power button (removing this jumper disables the power 

button).

JP2: Enable auto start (set power button on “ON” state always).

After installing the desired USB devices, snap back the front plate.


4. Install the 2.5” hard drive(s) if necessary using the provided screws. The 

hard drives (and optional coolers) will be fastened into the Hard Drive 

Mounting Bracket  

On each bracket you can install one 2.5” 

hard drive or two fans (40x40x10mm)

NOTE: The M350 enclosure does not permit the installation of a 3.5” drive.

With some motherboards, you cannot install the second hard drive bracket

You can install up to 5 fans inside 

the M350 enclosure: 

2 on each Hard Drive Mounting 

Bracket and one on the front

5. Install the power supply (if needed). The recommended power supplies 

for this enclosure are the picoPSU series (for example, 

picoPSU-120, 120W output, 12V input DC-DC power supply).

We recommend using these types of power supplies due to their compact 

size.


7. Install the top lid and fasten it with a screw.


Support and warranty

Standard Hardware Warranty 1Year / US, 2 Year EU 

Installation support: 30days via email, support@mini-box.com.

Additional accessories can be purchased on-line from CYNCRONIX

This Package Includes:

- 1 x M350 Mini ITX Enclosure

- 1 x HDD/FAN Mounting Plate (Up to 2 can be used at a time)

- 1 x Set of Mounting Screws

- 4 x Rubber Feet

 

Features:

- Smallest, Universal mini-ITX Enclosure
Fanless, natural convection design
- Fits Intel stock CPU heatsink
- Hidden area for USB / WIFI / Storage 
- Smart front power button
- SMA Antenna Hole.
- Up to two 2.5" drives, 
(one HDD bracket included)

- Size 192 x 210 x 62mm 
- Vesa, DIN-Rail, Wall Mount (Optional)
- ROHS compliant

Model Name
- M350 Mini ITX Enclosure
Dimension
- 210(L) x 192(W) x 62(H) mm
Drive Bays

- Supports up to 2 x 2.5" HDD 

- 1 x HDD Bracket Included

Front Panel- 2 x USB 2.0 (Hidden)
Case Includes

- 1 x M350 Mini ITX Enclosure

- 1 x HDD/FAN Mounting Plate (Up to 2 can be used at a time)

- 1 x Set of Mounting Screws

- 4 x Rubber Feet

Product Specifications are subject to change without notice

 
Zero noise, small footprint and low power
The M350 is Industry's smallest universal enclosure (192 x 210 x 62mm , 2.5L) capable of housing mini-ITX boards ranging from tiny Atoms to fully featured desktop or mobile CPUs. The M30 permits fanless operation (natural air convection via hundreds of tiny holes) for TDP < 10 watts and CPU-only fan for TDP <= 65watts.

Equipped with hidden (but not shielded) USB docking station for WIFI / 3G / Bluetooth or simply USB flash booting, the M350 is the only enclosure that provides such innovative USB, radio friendly, expansion methods. For internal miniPCI cards or modules, and high gain SMA antenna option is provided on the back of the case.

       

Smart Power Button:
The M350 power button can be disabled by means of removing a jumper, thus preventing accidental ON/OFF actions. An additional jumper activates an "always ON after power loss' automatic pulse generator that will startup your motherbaord every time power is applied, regardless of BIOS setting!

NOTE:

Additional fans can be installed on the hard drive mounting brackets or in the front of the enclosure.


 

Mounting and Power Supply Options for this Fanless Builder Kit:

To purchase the any the options in the list with no additional shipping charge and installation fee. Send us a message  Thanks!

Mounting Options
Picture of Mounting OptionsPrice      
Vesa mounting (attach in the back of a monitor)VESA-SCREWS-150.jpg$4.50
DIN-RAIL Mounting (vertical and horizontal)Din-Rail_150.jpg$4.50
Wall Mount Brackets$4.50
M350-Additional HDD Bracket2nd-bracket-150.jpg4.50
Wireless Antennaantsma-150.jpg7.50
Wireless Pigtaipigtail-150.jpg7.50




Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.