This phono preamplifier need to build after order placed.

The build time 2 week.

 


Balaned P2 Tubes Phono Stage Eq-Preampilier


Balanced P2, phono stage embodies the newest thinking of YS-audio dedicated and enthusiastic technical design YS Chui . The unit has MC input ( Max 75.5dB of gain ) and MM input ( Max 55.5dB of gain ), and, just as importantly, the Balanced P2 boasts an low noise level, so in practical use, the 75.5dB gain is usable in systems with low overall sensitivity. It uses a 6X4 rectifier tube with solid state regulator for HV B+ power supply , three 12AX7 for the gain stage and two 5687WA/B drive Jensen output transformer consist output stage provide true balanced output. Jensen MC step-up transformer provide true balanced input .This MC step-up transformer can good match for 1.5ohm ~ 40ohm output Impedance of MC cartridge . MM input is 47K ohm. The Balanced P2 all hand made by "point-to-point" . 

Features

 

p2i1.jpg (96671 個位元組)

uncanny natural flowing heart-stirring sound that 
matches any other ultra-Fi products on the market .
The phono stage made by Hand built " point to point " on YS-Audio factory.
"point to point" has become more focused, the soundstage is deeper.
Hand built by " point to point ' is very high cost of manufacture !
The installation of the tubes line stage is special designed , it can prevent RF interfere and vibrate interfere,
It has become very clean soundstage and saw the musical instrument hang up in the air.

 

p2i3.jpg (104899 個位元組)

The 6X4 Tube rectification opens up the soundstage and allows the music to "bloom". 
The melody flows naturally, like a river. In contrast, solid state rectifiers emit 
electromagnetic pulses that resonate throughout the audio circuit and add an 
electronic haze that can be perceived as a highly unnatural noise or grain. 
The unnaturalness of the solid state rectifier's turn on/turn off cycle creates a choppy, 
edgy feeling that over-emphasizes the leading edge of transients at the expense of a 
harmonic completeness and does not allow the individual notes to rise and decay naturally.
Beside, It with solid state regulator for HV B+ power supply , the regulator give the very good 
bass controls.

The Important features

p2f1.jpg (112747 個位元組)


The Balanced P2 has a select control for select 4 kind phono EQ network : 
RIAA , London ffrr , Columbia , SP.

The RIAA EQ for prevalence LP , 
The London ffrr EQ for London ffrr LP , 
The Columbia EQ for Columbia and old NAB LP , 
The SP EQ for EU 2 Single-Play.

 

p2b.jpg (100807 個位元組)
The Balanced P2 has two pair MC input with both RCA and XLR , one pair RCA for MM input .
The output with both RCA and XLR 

p2i2.jpg (101630 個位元組)
Jensen MC step-up transformer provide true balanced input .
This MC step-up transformer can good match for 1.5ohm ~ 40ohm
output Impedance of MC cartridge.

 

p2f2.jpg (113951 個位元組)

Phase select switch Normal / Inverse
Gain select switch with 6 position : 1 is MC 75.5dB / MM 55.5dB , 2 is MC 74dB / MM 54dB , 3 is MC 73dB / MM 53dB , 4 is MC 71dB / MM 51dB , 5 is MC 69dB / MC 49dB , 6 is MC 65.5dB / 45.5 dB

 

p2i4.jpg (103323 個位元組)

The two 5687WA/B drive Jensen output transformer consist output stage provide true balanced output.

 

External power supply.

All RCA connections use Neutrik , coupling cap use Sonicap and Oil cap.


p2_1.jpg (108443 個位元組)  p2_2.jpg (107187 個位元組) 


 

Specifications

Controls : 
Power Supply : Power On/Of .
Main Unit : Phase switch  Normal / Inverse , MC/MM input switch , MC input 1 / 2 switch.
EQ network Selector , Gain select . 

Output :  RCA one pair XLR one pair

Input :  MC1 input ,  MC2 input, MM input 

Frequency Response:  -/+ 0.25dB, 20Hz to 20kHz, RIAA equalized

MC Step-up Input Impedance 
1.5 ~ 40ohm internal (output ) Impedance of MC cartridge

Gain: 
1 is MC 75.5dB / MM 55.5dB , 2 is MC 74dB / MM 54dB , 3 is MC 73dB / MM 53dB , 
4 is MC 71dB / MM 51dB , 5 is MC 69dB / MC 49dB , 6 is MC 65.5dB / 45.5 dB

Noise:  MM 85dB (shorted input) , MC 84dB (shorted input).
signal-to-noise ratio, below 1 Volts RMS output,  A weighted

Distortion: Less than .06% at 0.5V RMS 1kHz output.

Maximum input: MM is 50mv , MC is 5mv .

Tube Compliment : 12AX7 x3 , 6X4 x1 , 5687WA/B x2

Dimension:  
Main unit , 455mm x 350mm x 120mm (W x D x H) 
power supply 160mm x 135mm x 60mm (W x D x H).

Weight: 10kg

Power Source: 110-127/220-240V,50/60Hz

The preamplifier Include : Box , Power Cable , Manual , All Tubes.

2 year warranty ( not include tubes and ship cost )


I have other auctions for Hi End Tubes Audio Please Enter Here

For more information, please click to YS-Audio Online


The Payment Methods and Shipping

PayPal
Or

Telegraphic Trasfer

I can ship the preamplifier to any local.
Please, e-mail to me about the cost of shipping.

The cost of shipping :
Hong Kong is Free shipping
to Taiwan by air is USD$50
to Singapore by air USD$55
to Malaysia by air is USD$55
to Japan by air is USD$62
to USA and Europe by Air is USD$150