Product Description
HDMI+DVI+VGA+Audio Control Board for 21.5inch 1920x1080 eDP LCD LM215WF3-SDA1
---The LCD features can be looked up via the following link: |
http://www.panelook.com/product_list.php?keyword=LM215WF3-SDA1 |
---The controller sets need 2pcs power adapter: DC19V3A~5A for the backlight DC12V2A~3A for the controller board |
||
For LM215WF3, the signal interface has the 2 types according to the different suffix: | ||
eDP interface: | LVDS interface: | |
LM215WF3-SDA1 | LM215WF3-SLA1 -SLD1 -SLE1 -SLK1 -SLG1 -SLM1 -SLQ1 -SLN1 | |
LM215WF3-SDB1 | LM215WF3-SLC1 -SLC2 -SLC5 -SLC7 | |
LM215WF3-SDD1 | LM215WF3-SSA1 | |
LM215WF3-SDC2 | ||
LM215WF3-SDDV |
---For the same eDP interface LCD, the backlight connector models are different. ---The listing items is only for the LM215WF3-SDA1. The backlight connector model is H401K-D06N-12B. The backlight Pin configuration is BLE-6PINS-CACACA ---If the suffix of your LCD model is other tpye, please contact us at first. Or else, this listing items cannot be used for your LCD direclty. |
---How to drive the 3K / 4K LCD panel? |
http://stores.ebay.com/ElecRealm/How-to-drive-the-3K-4K-5K-LCD-panel.html |
The LCD model list of NT68676 controller board: |
http://stores.ebay.com/ElecRealm/LCD-Model-Resolution-Work-for-Board.html |
---If your LCD siganl type is eDP, please refer to the following datasheet on how to drive the eDP signal LCD: |
http://stores.ebay.com/ElecRealm/How-to-drive-the-eDP-signal-LCD.html |
---Please refer to the descriptions for large size (26inch to 55inch ) LCD LED display: |
http://stores.ebay.com/ElecRealm/The-solution-for-large-size-LCD-LED.html |
The table of controller board performance: |
http://stores.ebay.com/ElecRealm/Controller-board-performance-table.html |
---The board power and the LCD voltage are 2 different parameters. ---The board can be worked from DC12V2A~3A. ---The LCD voltage only can be supplied by the board's jumper. Normally, there are 3 kinds of voltage: +3.3V +5.0V +12.0V. The jumper aas been jumped to +12.0V for this listing LCD LM215WF3-SDA1 . Please don't jump it again. |
Kind Note: |
---The driver board can be worked with lots of lcd with different resolution after upgrading the firmware,such as: ......800*480 ......800*600 ......1024*768 ......1280*800 ......1280*1024 ......1366*768 ......1440*900 ......1600*900 ......1920*1080 ......1920*1200 ......up to 2048*1154@60Hz |
The Related Items for the Controller Board: |
---Programmer: http://www.ebay.com/itm/400754347419 ---USB Port Programmer: http://www.ebay.com/itm/400788632576 ---DC 12V Adapter: http://www.ebay.com/itm/400737854240 ---DC 19V Adapter: http://www.ebay.com/itm/401224289046 ---HDMI Cable: ......2.0m/145g--2.18yd/0.27lb |
Package includes: |
---1× HDMI+VGA+DVI Driver Board ---1× Keyboard with Wire ---1× LVDS connection cable for eDP board and NT68676 ---1× LED Boost board ---1× LCD backlight cable ---1× eDP converter board |
File Download: | |
Firmware of NT68676 |
|
Specification of M.NT68676.2A Driver Board.pdf |
|
How to enter into factory mode for M.NT68676.2A board.pdf |
|
How to enter into factory mode for M.NT68676.2A board.mp4 |
|
USB driver software for digitizer.rar & Software Programming Guide_v2.0.pdf |
|
Datasheet_LM215WF3-SDA1.pdf |
|
User's guide of M.NT68676.2A controller board.pdf |