Heat removal is 4 to 5 times greater with this water block than using just a finned heat sink.
Components can be mounted to one or both sides thereby allowing heat removal from two 40x40mm TECs or other electronic components at the same time.
All copper construction allows for parts and components to be soldered to cold plate for maximum thermal conduction.
Superior manufacturing, CNC machined from solid copper. Do not confuse this cold plate (water block) with inferior cheap water blocks that will NOT deliver on cooling ability. You get what you pay for.
100% Made in the USA by Custom Thermoelectric, LLC.
Measures: 1.62 x 1.62 x 0.55 inches
Weighs: .34 lbs (154 gm)
Inlet and Outlet on the same side.
Usable flat area of 1.62 x 1.62 inches (41 x 41 mm) per side
Inlet & outlet tapped 1/16" NPT: Comes with 2 pieces Nylon barbed tube fittings for 3/16" ID tubing.
Will accomodate per side;
CNC Machined from a solid billet of copper. solder brazed together to a 100 psi rated watertight seal.
Minimum flow rate: 0.1 gpm. Maximum flow rate: 2.5 gpm.
Water flow rate GPM | Thermal Resistance °C/watt |
0.2 | 0.044 |
0.4 | 0.033 |
0.6 | 0.029 |
0.8 | 0.025 |
1.0 | 0.023 |
PDF of Thermal Resistance graph for this Water Block:
Matching cold plate (last picture) is part number CPT-2.25-1.62-0.25-AL and is NOT included in this auction.
NOTE: Some pictures show the water block as seperate pieces. This is only to show the details of the high heat transfer efficiency design of the interior surfaces. All water blocks come assembled ready to use.
Water blocks are also called;