1.Voltage range

AC 80V-260V/50HZ-60HZ

2.Power dissipation

20VA

3.Coordinate number

1/2/3/4/5

4.Display

7 bit display with signed

5.Times frequency

4X

6.Readout box input signal

TTL

7.Input frequency

>100KHZ

8.Resolution

10um, 5um, 1um, 0.5um, 0.1um

9.Operating keyboard

light touch buttons

10.Linear scale Grating space

0.02mm/ 20um

11.Size of digital readout

295*195*85mm

195*125*65mm (mini size)

410*290*140mm(after packing)

Mechanical

Specification 

Supply Voltage

+5V DC (+/- 5%)  24V(PLC)

Current Consumption

150mA (typical)

Output Signal

TTL

IP Protection Class 

IP54

Operating Temperature

0-50 degree

Performance

Specification

Resolution 

0.1μm/0.5μm/1μm/2μm/5μm

Accuracy

+/-5μm(5 μ ),+/-10μm(10 μ ) /1000mm

Repeat Accuracy

1 Resolution Count

Reference Mark

Periodic (25mm Spacing)

Measuring Range

50mm~3000mm

Reaction Speed

60m/min(0.005mm) 25m/min(0.001mm)

Reading Head Sliding System

Vertical Five Bearing

Signal Convey Cycle

20μm

Cable 

3M(standard) Other(options)

L=Lo+100mm+19*2mm

L:Overall Length     Lo=Travel length/Stroke

Normal Size : 21*33m  

Large Size :Lo >1000mm   Normal Size:300mm≤ Lo<1000mm Slim Size: Lo<300mm

1.Brand-name Parts

2.Country of Origin

3.Distributorships Offered

4.Electronic Link

5.Experienced Staff

6.Design updated quickly

7.Green Product

8.Guarantee/Warranty

9.International Approvals

10.Military Specifications

11.Packaging

12.Price

13.Product Features

14.Product Performance

15.Prompt Delivery

16.Quality Approvals

17.Reputation

18.Service

19.Small Orders Accepted

20.Abundant financial resources

1. Coordinate measuring machine

2. Profile projector

3. Microscope

4. Video measuring machine

5. Movement control

6. Position monitoring

7. Coordinate measurement

8. X-Y working table monitor

9. Mechanical control

10.Other area of linear scale and rotary encoder

1:Zero clearing

2:reset

3:mm/inch mode

4:ABS/INC coordinate conversion

5: 200sets sub datum

6:power off memory

7:center of1/2

8:liner error compensation

9:sleepping mode

10:Clear 200 sets Sdm datum;

11:ABS/INC mode

12:calculator

13:drilling of circumference

14:drilling of oblique line

15:machining of inclined plane

16:machining of circular arc

17:lathe function(match)

18:Rectangular lumen gradual

processing

19:digital filtering

20:vibration filtering and R fucntion

digital readouts do not display

1.Whether the power line is connected.

2.Whether the power switch is connected

3.Whether the power voltage is suitable

4.The inside power of the linear scale is short circuit
5.The safe pipe fusing or not.

1.Check the power line and connect it

2.Connect the switch

3.The power voltage should between 100V~250V
4.Pull out the connect of the linear scale.
5. Change the safe pipe

The hull of the digital readout has electrification

1.check whether the lathe and the digital readout landing well
2.whether 220V power is leakage of electricity

1.make sure the lathe and the digital readout landing well

2.Check 220V power

one axis does not count

1.Exchange the linear scale with anther axis,whether count

2.the digital readout is under some special function

1.if count normally,it is the stoppage of linear scale;

if it does not count also ,

it is the stoppage of digital readout

2.quit the special function

The digital readout does not count right,

the distance displays is not the same as the actual distance

1.check whether the lathe and the digital readout landing well
2.the lathe has a low precision
3.The running speed is too fast of the lathe
4.the installof the linear scale is not up to standard.low precision

5.The resolution of the digital readout does not agree with the linear scale

6.The dimension unit does not agree with the mm/inch
7.the linear error compensation setting is not right
8.Reading head is broken down


 

1.make sure he lathe and the digital readout landing well
2.Repair the lathe
3.Slow down the speed
4.Install the linear scale as required

5.reset the resolution
6.change mm/inch

7.reser the linear error compensation
8.change linear scale reading head

The linear scale does not count or sometimes

1.Reading head is broken down
2.there is foul inside the linear scale
3. short circuit or open circuit inside

1adjust the install of the lathe and the linear scale,

repair and change the linear scale
2.repair linear scale
3.repair linear scale

anti-jamming function is not well

1. check whether the lathe and the digital readout landing well
2whether the shielding line inputting connected well with the metal case

1.Make sure the lathe and the digital readout landing well
2connect again

Our goal

Our goalis to supply the good quality products and offer a better price for you , 

to make business easier.

Saving your time and money.

Intuitiveness or "Easy of Use".

If the digital readout is poorly designed ,too complicateed,

if the display isn't bright enough, or in other words is 'user unfriendly',

you'll regret your purchase decision . 

It simply won't matter what you paid, it's not worth it !

Support.

Perhaps most overlooked factor when buying a digital readout.

Hundreds of videos are the best in the industry,

and are available free fro you our customers.

Our tech help is the best in the business.

 Any question , we would like to settle them together.

Parts.

Breaking a scale, you don't get to replace the entire digital readout kits.

We can provide the key parts of  products .

Warranty.

All of our products take one full year warranty.

Normally, the service time is 3-4 years in experience.

Customer Service.

We pledge to never 'over sell' you on a products that won't work well for you.

Our philosophy is to try and save you money and get the best value kit 

tailored to the machinery you have.

Shipping.

We get strong logistic agents no matter where is the destination around the world. 

Every time our duty is to get the economical freight for you.

Price.

Probably the price is very important factor when buying a digital readout .

We are sure you get the best price from us .

because we are the factory in this line more than 8 years. 

we believe you get what you pay for.