Scotle BGA Rework Station Reflow Reball Scotle IR6000 V4 CE Certificated
 
详解图Scotle IR6000
 

Hello friend,before you want to bid or purchase our products, please read careful the Buyer Standard Service Guidelines which is in the back of the our product description.Thank you!
 
 
Transportation Tips
 
 
* We don't delivery to following countries: Canary Islands,Croatia, Russian Federation and Brazil, Ukraine.
 
*Our warehouse is locatedin UK,due to distance concern, shipment may have potential very low risk of partial damage or loss,especially to below countries: Lithuania,Spain,Italy,Sweden,Portugal, Latvia,Estonia,Finland, Romania, Bulgaria, Greece, and Greek Irelands, Poland, Czech Republic, Slovenia, Slovakia, Hungary.As an eBay honest seller, we fully take liability of above unwanted issues.To perform after service, from buyer side, do it yourself ability is required as per service guideline. please kindly ensure you are aware of that before bidding.
 
 

Introduction
 
 
Scotle BGA IR6000 rework station is widely used in electronic repairing, such as cell phones, desktop, switch , PS3, Wii, Xbox 360 reballing and some other areas such as SMD reworking . It uses advanced infrared technology and can give even heat distribution and can protect your eyes.
 
Scotle BGA IR6000 rework station has two temperature zones, top zone is 450W ceremic plate heater and bottom zone is made up of three ceramic plates 600W each, total power is around 2400W.There is a steel mesh upon the bottom zone which makes heating more even.Temperature rises quicker and more steadily than ACHI IR6000.It can help finish desoldering in about 5 minutes.
 
 
Scotle IR6000 V4 BGA Rework station(Only Black version)

upgrade from ACHI IR6000
 
CE Certifiled BEST Quality
 
2 Years Warranty
 
 
Manufacturer Suggested Retail Price:2999USD
 
 
 
Please note that this is a 220v machine for countries like AU,UK,EU,etc.

For using in USA,Canada,Japan,mexico,where the standard voltage is 110v, you need to get

A
voltage transformerelsewhere to convert 110v voltage to 220V.

Sorry for any inconvenience caused you.

Technical parameter

Upper heating

Dark IR 450W

Size of Applicable Chips

65mm×65 mm

Bottom heating

IR 1800W

Size of bottom heating

240mm×210 mm

Upper heating position control

Up, Down, Right, Left

PCB fixed platform

Slide Guide Bracket

LED Auxiliary Lighting

YES

Force Air Cooling

NO

Programmable

YES

Soft Control

YES

Power

2300W

Weight

17KG

Voltage

220V

Else

420mm*470mm*470mm

 
 
Brand New Scotle IR-6000 Infrared BGA XBOX Rework Station

Power: 2300W

The Ultra MAX Rework Soldering Station

Size of Applicable chips : 65mm*65mm

Size of bottom heating : 240*210mm

CE Certification, ISO9001 Quality Certification

 
 
Why Buy Scotle IR6000 V4?
 
1.CE Certified Stable Quality

2.Economic Solution for Xbox 360/ps3/Latop

3.Larger 2300w Power-saving your time

4.Compact Size Space Saving
 
 
Main features
 
 
Can be connected to computer with usb port. It can be controlled by the IRSOFT temperature software.
 
Can set up 8 different rising and constant temperature segments.
 
Can store 10 groups of temperature profiles at one time.
 
Can be widely used in leaded or lead free SMD BGA reworking.The max temperature can rise to 400°C.
 
Equiped with advanced OMEG K-type temperature sensor which has high efficiency and accuracy,capture the actual temperature at any time.
 
Equiped with linear-guided PCB Bracket,can fix and adjust the PCB board by the handls.
 
Alert 10 seconds in advance before the temperature profile run to finished.
 
High integration designed. Smaller workbench, non-mixed cables, the convenient operation, and all the process of soldering are controlled by a button.
 
Has safe power switch.When something wrong like overload,it will power off automatically,protect your machine from being burned and prolong the lifespan.
 


Improvement of scotle IR 6000 V4 then ACHI IR 6000

 
1. Excellent quality - CE certificated
 
2. Larger Pre-heating area 240mmx210mm
 
3. Air Protection Switch- More safer
 
4. Detachable K type thermocouple


The difference between Scotle IR6000 V4 and ACHI IR6000:

IR6000 comparison

 


Reballing Guideline

1. Before start check the infrared radiation, temperature sensor, and power cord are properly connected.

2. Power on the main power and the bottom of the warm-up power switch, and adjust the intelligent temperature controller in the 200-240 range, so that the bottom of the warm-up 2-3 minutes.

3. Power on upper heating head. Generally leaded soldering between :200-220, lead-free soldering temperature between 240-260.

4. If chips can't be removed, turn up 10 to 20 degrees each time.

 
 
Desoldering / rework process:

1. Fixed PCB board;

2. Switch on bottom heating plate with pre-heating temperature 200-240 degrees

3. Adjust the temperature sensor of the infrared radiation, will be placed in the appropriate position of the chip. Coated with a flux (soldering or welding oil) around the chip and the sensor head, doing so allows the sensor to measure temperature more accurately. With flux, it can protect pad in good shape. Adjust the upper heating head and distance is about 20-30mm, and then set the upper temperature controller temperature of 240-260 or so. Special Highlight to temperature control: please make sure temperature sensor is correctly positioned that would not heat up too high and burn chips.

4. Using vacuum suction pen or tweezers to remove the chip when chips reach the melting point.

5. The soldering is completed, turn off the power supply.

International Orders: The buyer is responsible for any applicable import duties and local taxes. Please verify with your customs before making your purchase.

Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses.

Note: Ship world widely! Post Code is required! A phone number is required for the smoothly delivery of your goods! Combined purchase is welcomed!

 
 

For all of our clients

There are many new brand name of similar item in the market recently, although their price are really cheap, but the quality of their products are also terrible:

1. That factory only produce as a lower price as they can, they won't care about the quality.All our item is pass the ISO9001 quality certification.

2. Have visit and purchase the item samples from some other supplier, many samples are in bad quality. After compare samples again and again from different supplier, finally we provide this top-quality item for you at lowest price.

3. You can purchase a high quality and safety machine, but please don't waste the money for a cheaper but a low quality machines. We only sell top-quality item. Base on the top-quality, then we will beat our price as lowest on eBay.
 
4. We keep a good relationship with the supplier, so that we can get the stable and reliable stock for our client.
 
 
 
Packing List
 

1 * Scotle IR6000(220V)(Only Black Color)
DSC_0237

DSC_0236
DSC_0251
DSC_0256
DSC_0246
DSC_0240
DSC_0226
认证书Scotle IR6000
 
FAQ
 
1) This is the first time I use this kind of machine, is it easy to operate?
 
There is english manual or guide video that show you how to use machine.
 
If you still have any question, please contact us by e-mail / skype/ phone
 
 
2) If machine have any problem after I receive it, how can I do ?
 
Free parts send to you in machine warranty period.
 
 
 

Buyer Standard Service Guidelines

Payment

1. We only accept the payment by PayPal.

2. When you payment, please leave your correct address and phone number, we only ship the product to the PayPal address.

3. Immediate payment is required.

Shipping & Delivery

1. Transportation Tips

* We don't delivery to following countries: Canary Islands,Croatia, Russian Federation and Brazil, Ukraine.

*Our warehouse is locatedin UK,due to distance concern, shipment may have potential very low risk of partial damage or loss,especially to below countries: Lithuania,Spain,Italy,Sweden,Portugal, Latvia,Estonia,Finland, Romania, Bulgaria, Greece, and Greek Irelands, Poland, Czech Republic, Slovenia, Slovakia, Hungary.As an eBay honest seller, we fully take liability of above unwanted issues.To perform after service, from buyer side, do it yourself ability is required as per service guideline. please kindly ensure you are aware of that before bidding.

2. Shipping time

United States

Delivery Service

Shipping Time

Delivery from US

USPS

3-5 business days

Delivery from China

ePacket

7-15 business days

DHL

5-7 business days

FedEx(Preliminary)

7-10 business days

United Kingdom

Delivery Service

Shipping Time

Delivery from UK warehouse

Royal MailPreliminary

3-5 business days

Parcelforce

1-3 business days

DPD

2-4 business days

DHL

2-5 business days

Delivery from China

Goods' worth is more than 17 pounds need to pay customs duties& VAT

DHLPreliminary

5-7 business days

FedEx

7-10 business days

AustraliaMexicoCanada and Other Asian countries

Delivery from China

Post

15-30 business days

DHL

5-7 business days

FedExPreliminary

7-10 business days

FranceItalySpainPortugal and other European countries

Delivery from UK/Germany warehouse

DPD

3-7 business days

DHL

3-7 business days

Delivery from China

DHL

5-7 business days

FedExPreliminary

7-10business days

3.Problems always happen, we pledge to do best to solve problem. We welcome everyone to communicate with us in eBay community. But, just in case, anyone open dispute/negative feedback without bilateral communication. It is not welcome and we definitely drag eBay ID to block list.

4.How to contact us by eBay message

Purchase history---> contact seller---> select a topic---> other

Please don’t select either I haven’t received my item or item I received is not as described.

select a topic

5. If you don’t received your itemPost is economic but poor service quality. It may have some risk item loss within the regular transport time,please contact us by eBay Message as soon as possible, we will deal with it within 24 hours and make sure your satisfaction,through communication, we can give you a refund or a replacement product.Please don’t arbitrarily open disputes and leave a neutral/negative feedback or low DSR without any communication with us.

6. If the goods you receive are partial damaged or don't match with the item description,please take some photos and videos and sent them to us as soon as possible.After checking the photos and videos, we can reissue products or accessories to you. Please don’t arbitrarily open disputes and leave a neutral/negative feedback or low DSR without any communication with us.

Customs Tax & Duty

1. As long as item location is China (Except for the United States), all the parcels bound to target countries subject to tax&duty.For specific tariff, please kindly contact local customs house for details.All tax&duty are at buyer’s expense.

2. When parcel arrives at inbound country customs house, buyer is liable to clear cargos according to customs staff requirementwithin certain period. The clearance period is determined by local customs and not included in estimated shipping time.

3. For each parcel, we will take a declaration of 60% the total value of goods .If you have special requirements for the product value of the declaration, please leave a message! Thank you!

Customer Service Support

Country

Working Time

China Beijing Time

9:30am~6:00pm(Monday ~ Friday)

United States New York Time

11:30pm~5:00am(Sunday ~ Friday)

United Kingdom London time

2:30am~11:00am(Monday ~ Friday)

Other EU countries

3:30am~12:00am(Monday ~ Friday)

*If you have any questions about products or transportation, please contact us before bidding or payment! Thanks.

*Sometimes we will send an eBay message to tell you something about the product or transportation information before shipment, it will need you confirm, so please remember to check your E-mail after payment.

* After you receive the goods, if you have any questions, please contact us by eBay E-mail .

Feedback

* Our service may be not best but pledge to become better and better.

* If you have any displeasure on our product, please no hesitate to tell us. We will help you to solve it.Your satisfaction is our first priority. We appreciate your positive feedback.

* We sincerely ask you not to leave negative feedback or low DSR before contacting us. No seller can ensure no problem but value how to solve problem.

* Any unfriendly behavior is not welcome, such asneutral/negative feedback or low DSR without any communication with us.We will add you in our block list and not deal with you anymore.Thank you for your understanding.








PushAuction