Bosch ev14 650cc fuel upgrade kit to suit BMW with M20 Engine.

Listing is for a set of 6(pcs) Genuine 650cc Bosch ev14 Fuel Injectors, BMW M20 straight 6 fuel rail large enough to support over 1500WHP, and plug and play injector connectors.  The injectors are high impedance which will work perfectly with factory or any aftermarket ECU. Injectors are sold in balanced sets to ensure cylinder per cylinder equal fuel delivery. Fuel rail comes with  2pcs 6-AN end fittings, 6-AN return port fitting, and one block off plug. Injectors will come with flow chart and injector latency data to make tuning a breeze. The injectors are the new bosch ev14 design is compatible with all known race fuels on the market today including e85 ethanol and methanol base fuels.  At base fuel pressure of (43.5psi) the injectors can support engines making up to 600hp (@ 80% duty). At 4bar fuel pressure the injectors can support engines making up to 700hp. The injectors utilize a 16 hole mist spray pattern which will provide proper fuel atomization resulting in smoother idle, and clean combustion characteristics. With the combination of a balanced set and great fuel atomization, you will achieve light and partial throttle drivability, rock solid idle, easier tuning, and more power output to the wheels.

SHIPPING WITHIN THE U.S IS FREE. SHIPPING INTERNATIONALLY IS $49.99

INJECTORS AND ACCESSORIES ARE BACKED BY OUR 2 YEAR UNLIMITED MILE WARRANTY

ORDERS ARE SHIPPED WITHIN 24 HOURS OF CLEARED PAYMENT.

 



 ***NOTE: THIS FUEL UPGRADE KIT WILL ONLY FIT BMW WITH M20 ENGINE OR SETUPS WITH THE SAME FUEL RAIL MOUNTING CONFIGURATION. 

 

Applications with M20 Engine:

Injector specs:

Static Flow Rate @ 43.5PSI (300 KPa) =  650cc/min 

Coil Resistance: 12 Ohms / High Impedance / Saturated

Factory Tollerance: +/-5% (actual +/-7%) 

16 hole Cone Spray Angle

14mm Inlet Diameter 

Factory fitted with Viton upper and lower o-ring

Items Included:


IF YOU HAVE ANY QUESTIONS OR CONCERNS, FEEL FREE TO EMAIL ME AT cleaninjection(at)msn.com