HIT BUY NOW RIGHT NOW AND YOU IN WIN WIN.
NO NEED TO WAIT FOR SOME AUCTION TO END.
JUST HIT BUY NOW!
PLEASE VISIT OUR EBAY & AMAZON STORE HORSEPOWER-HOUSE FOR MANY MORE VERY COOL AND UNIQUE MOTORCYCLE ITEMS
20mm Special Puller to remove your Magneto Dynamo Alternator Generator Stator Rotor Flywheel Fly Wheel Puller Remover Tool - fits many different makes and models
MADE IN USA!
This tool is needed if you are removing your flywheel and starter clutch.
***NOTE: Make sure you measure the hole where this tool needs to screw in - and compare - prior to purchase. This is a 20mm tool.
PLEASE READ: Lubricate all threads of tool and flywheel before use. See tips below for puller use. Use of impact driver NOT recommended. Only use hand tools, a large hammer/mallot, leverage, breaker-bar, or you risk damaging the tool AND/OR the flywheel. See more tips below on general flywheel removal.
It is NOT recommended to just keep turning and turning the puller to remove the flywheel (if nothing is happening). You will likely just strip the tool and or the flywheel itself. This is a part that is designed and installed TO STAY ON. So it might not be simple to remove your rotor. See tips below for easier removal.
We also offer a very handy Flywheel Pulley Holder tool that might help with this job. See our other listings.
Please email us if you know other models this tools fits (or does not fit) so we can update our list
International shipping available - Standard overseas shipping takes up to 6 weeks to arrive (except for Express Mail.) There is no live tracking - just delivery confirmation. Choose Express Mail for the fastest and trackable overseas shipping.
Suggested Fitment:
HONDA UTILITY ATV QUAD
TRX420FA TRX420FPA RANCHER 07 08 09 10 11 12 13 14 15
Does NOT fit older Rancher 350's. TRX400FW 95 96 97 98 TRX450S TRX450ES TRX450FW TRX450FM TRX450FE 98 99 00 01 02 03 04 TRX500 RUBICON TRX500FA TRX500FPA TRX500FGA 05 06 07 08 09 10 11 12 13 TRX500FE TRX500FM FOREMAN 2014 2015 SXS500M SXS500 PIONEER 2015 SXS700M SXS700 PIONEER 2015 TRX650 RINCON TRX650FA TRX650FGA 03 04 05 TRX680 RINCON TRX680FA TRX680FGA 06 07 08 09 10 11 12 13 14 15
Also fits many other Honda motorcycle and atv and sxs that require a 20mm puller.
Tips on removing a powersport vehicle flywheel:
Flywheel Pullers are essential engine service tools and they are used in a lot of different jobs. We have a large selection of flywheel and rotor pullers for just about any motorcycle or ATV, and this tool is one of our most popular products. Most pullers are simple tools, usually consisting of an outer body that attaches to the flywheel and a lead screw to push on the crankshaft. Some pullers are just a hardened bolt that threads into the flywheel. Virtually every flywheel or rotor is attached to the crankshaft by a taper on the crank, which matches the flywheel. Torque from the fixing bolt holds the flywheel securely on the shaft.
Pulling a flywheel or rotor looks easy enough. So what's the big deal? Well, sometimes it isn't such an easy job. Corrosion, heat cycling, or over-torquing the fixing bolt can make the flywheel difficult to remove. Many mechanics resort to using a large breaker bar or air impact tools when a flywheel won't come off easily. Try to avoid the temptation, because both of these techniques are sure ways to damage the flywheel, the puller, or even the crank, which is a very bad and expensive outcome.
There are two simple tricks to employ when faced with a stubborn flywheel. When do you know you have a stuck flywheel? With your handy-dandy torque wrench, of course! The best way to remove a flywheel is to use a torque wrench set to 50 ft-lbs. Most flywheels will come off with less torque than this. If it does not come -- at this level of torque, don't just go crazy and put more torque on it. You will likely strip the tool if you do this.
If you have reached the 50 ft-lb limit, head back to your tool box and get a good sized flat-face steel hammer, like a 12 or 16 oz ball peen hammer. Many times a medium swing hammer blow to the flywheel puller will deliver enough shock to jar the flywheel loose. To do this, use the hammer to strike the end of the flywheel puller to shock it. Remember to wear safety glasses and make sure that you have something to catch the flywheel, as sometimes it can jump off the end of the crank when you deliver the hammer blow. The last thing you want to do is damage the flywheel if it falls on the floor.
If the flywheel wont budge after striking it a few times with a hammer, it's time to break out the big guns-the propane torch. When all else fails, heating the flywheel can often do the trick. Applying heat to the flywheel itself will expand it, while the greater mass of the crank will stay cool and expand much more slowly. The differential in expansion rates will help to loosen the flywheel from the crank. But first, before you light the torch up, give the flywheel a good cleaning to get off any oil or other flammable compounds. Also make sure to get rid of any flammable liquids in the area, remove the gas tank and put it away in a safe place away from the work area, and make sure that the area you are working in is properly ventilated. The last thing you want to do is set your bike, yourself, or your garage on fire. Once the flywheel is clean and dry, and you have taken the proper precautions, put on your safety goggles and gloves and fire up the torch. Apply heat to the hub of the flywheel. One important point here: Only apply heat to the center of the flywheel. Focus the flame of the torch, and don't get it near the outer rim of the flywheel. Some flywheels use adhesive or other fixing compounds to locate the magnets in the rim that can be damaged by concentrated heat, and some magnets can be damaged by excessive heat as well. So concentrate the heat at the hub only. Once again, be prepared to catch the flywheel if it pops off, but make sure to wear gloves or other protection to avoid burning yourself on the hot flywheel.
These two techniques are all you really need to remove a stuck flywheel with a minimum of effort. About the only situation that would resist these procedures would be the flywheel on that ATV that you just pulled out of the lake, where it had been sunk for 6 months. In THAT situation, there is an old mechanic's joke, "R&R ATV."
We are always adding new items to our store http://stores.ebay.com/horsepower-house
Check out my other items!
Be sure to add me to your favorites list!
US Buyers: REGARDING DOMESTIC SHIPPING/ HANDLING - Our "__" Economy Shipping usually takes 4-10 BUSINESS DAYS to arrive. If you need faster service, we highly recommend you select Expedited Shipping upon checkout. Your Order will move straight to the front of the line as far as handling time and shipping service. Otherwise, your order will be "in line" with all of our other Economy Shipping orders, and those take time to process. Also, there is no accurate "live tracking" of Economy Shipments (some do, some don't). That sort of thing costs more. In order for us to be competitive in price, we have to use the "least expensive" shipping service possible.
If you have a specific deadline, please select the appropriate shipping service, and then email us, (or enter this info in the Comments of your payment). We will do our best to meet your special needs.
STANDARD INTERNATIONAL SHIPPING: Can take up to 6 weeks to arrive (or less). Choose Express Mail International for much faster handling and shipping service.
Please read all checkout info and correspondence relating to your eBay purchase. This will help clarify shipping and handling guidelines - as well as handling returns / refunds.
Just making sure everyone understands this in advance. Thanks for your understanding.
We have to answer this question far too often, so:
No, we do not have a brick & mortar store you can come to. It costs far too much to do that. This is why there are so few b&m stores left. NO PROFIT IN IT! Online shopping is where it's at. We ship only. It is much simpler and easier for us all.
This is shown in the Ask A Question section of all of our ads as well.
----------------------------------------------------------------
Regarding our Return/Refund Policy:
We accept all returns, AND--
We happily pay return shipping if WE were at fault:
- Item broke (but was not misused)
- Was blatantly misrepresented
- Specs of item were not what ad stated
- Fitment was clearly incorrect vs what ad stated
You pay return shipping if YOU were at fault:
- Misused the item
- Damaged the item due to lack of proper use
- Or you merely HOPED the item would fit your application, but you weren't really certain if it would (called the Guinea Pig Rule)
- Or you just don't want the item for some random reason
- There is nothing abnormal about this policy. We stand behind everything we sell on here. But we are not some humongous store who can afford to pay thousands of dollars per year in return shipping if we were not at fault.
We should not have to have all of these "disclaimers", but there are a few buyers who try to "work the system" to either get something for --, do not read ads thoroughly, or want to get -- return shipping (and they were at fault). We have seen it all on here. Our ads are insanely detailed FOR YOUR BENEFIT. If you do not agree with this policy, please do not buy. There are plenty of other sellers who will be glad to have your business. Honesty is always the best policy.
=================================
Let's just clutter our page a bit more with yet ANOTHER Disclaimer regarding shipping & handling:
If you are really desperate for any eBay item (especially ours,) we highly recommend you select (and pay for) our Expedited Shipping. You will see this option upon checkout. This assures you the quickest handling and shipping service we offer.
Expedited Orders placed Monday-Friday (other than Holidays) before 3:00pm Eastern Time go out the SAME DAY (and typically take 3-5 business days - or less - to arrive depending on where you are in the continental US.) Whereas Economy (aka SLOW/FREE) orders will wait in line with all the other schmucks and take 36-48 hours to go out depending on our backlog - and can take 4-10 business days to arrive (thank goodness we have quite a large stack of orders at all times.)
This is why we offer the faster shipping methods - for YOUR benefit - if you are in a jam.
We are not going to jump your Economy Order over all the others that we have ahead of yours - because that is just unfair to them. We are very fair people here. So, pay the few extra dollars, get your order out QUICK - and save your life.
We offer this for your benefit. Why not take advantage of it??? The order will arrive before eBay "estimates," regardless. If your a** is on the line - save your life - and take advantage of what we offer.
Someone told me this once: "Fast ain't -- - and -- ain't fast..." (Remember that)
***Note to other SELLERS***
Any seller caught stealing our research info, fitment data, photos, text in our ads, ANYTHING in our ads (we have code in our text and photos that will show we created it,) will be immediately reported to eBay Inc for Intellectual Property theft.
DO YOUR OWN WORK!