NanoSuction for Phones, Cases, & Tablets

NanoHold uses microscopic suction "cups" to hold your device to many smooth, flat surfaces!

It’s like having another person hold your phone!

Affordable! Convenient! Easy! Fun! Useful!

NanoHold allows you to actually follow along with how-to videos!

Use your NanoHold to keep a tablet nearby for family lists or calendars!

NanoHold allows you to keep your recipes accessible as you cook while keeping your phone/tablet out of the mess!

With NanoHold, you can easily access useful apps while you work/present projects!

With NanoHold, it is easy to take a stellar full-length group or individual selfie that can even include your gorgeous setting!

How does NanoHold work?

NanoHold material has microscopic suction “cups” on its surface. Just like a suction cup, when pressed to a surface, the "cups" engage and allow you to stick your phone to various flat, smooth surfaces. This suction surface allows you to stick your device to surfaces without being sticky or leaving behind a residue.

What surfaces will NanoHold work on?

NanoHolds stick on to clean, flat, smooth, dry, non-porous surfaces including: Glass, Metal, Acrylic, Mirrors, TV/Computer Screens, Dry Erase Board, Tile, Finished Wood Cabinets, and More!

Will NanoHold work on my device or case?

NanoHold will work on any phone, tablet, case, or other device that has a flat back. As long as you install NanoHold on a flat surface (back of your flat phone or flat phone case, back of your flat tablet, etc.), it will work! If you are using a NanoHold on a larger tablet, you might want to use two NanoHolds for extra protection.

Is NanoHold easy to use?

It sure is! Check out this short clip of a NanoHold in use!

How do I install my NanoHold?

A NanoHold has two sides, one side with suction and the other side with adhesion. Both sides have a protective liner that must be removed to use the product.

To use your NanoHold, first remove the paper protective liner and stick the adhesion side to your device or case. Then on the other side, remove the clear plastic liner and gently press the NanoHold to the chosen surface.

Instructions:

Clean the flat, back side of your device and dry thoroughly.

Remove the WHITE liner from the adhesive side of the NanoHold.

Attach the NanoHold to the back side of your device.

Remove the very thin, cellophane-like, CLEAR liner from the nanosuction side of the NanoHold.

Before using for the first time, rub the NanoHold on a towel or your clothing to decrease suction. This will make it easier to remove the device from the surface. Initially, the suction is very strong.

Use ONLY on flat, smooth, dry, clean, nonporous surfaces that can withstand strong suction and removal without damage. Press device with the NanoHold to selected surface.

Test suction contact before releasing device by giving it a slight pull. Do NOT let go of your device until you are 100% sure that there is suction contact sufficient to hold your device. Suction contact time is variable.

What is the “NanoHold Test”?

Use the “NanoHold Test” to assess the suction contact with a slight pull on the device, like checking a suction cup for suction. The device should adhere tightly to and not come off of the surface. Do not let go of your device if it does not pass the “NanoHold Test” or if there is any doubt about whether there is sufficient suction to hold the device.

Will my NanoHold always work?

Test your application. Make sure the condition of the NanoHold, the surface chosen, and the suction contact are sufficient to support the device for the amount time you plan on NanoHold supporting the device. NanoHolds stick temporarily, and like all suction devices, the duration of suction cannot be predicted. Use NanoHolds responsibly and at your own risk. Be smart and enjoy your NanoHold safely.

How do I take care of my NanoHold?

NanoHolds come with a cover to protect them and extend their life. Along with the cover, you should regularly clean and rejuvenate your NanoHold by wiping it with a damp cloth or paper towel and allowing it to air dry. You can also use cellophane tape (like Scotch Tape) to clean its surface.

Protective Cover Included!

Each NanoHold comes with a cover to protect the NanoSuction. Use the cover when you are not using the NanoHold to hold up your phone. The cover is a two-sided plastic card in black and white to match your device. You can also use the cover as a wedge between the NanoStuction and the surface when you want to remove your phone.

You can also use your own protective cover. Choose your favorite object that is the size of a credit card. A laminated, plastic, or glossy object works best. Examples of covers can be ID cards, credit cards, photos, business cards, hotel key cards, etc. Use your imagination and make your NanoHold even more fun.

How long will my NanoHold last?

NanoHolds keep suction power over time if kept clean and undamaged. A well cared for and undamaged one will last many months to years. Use a cover, one is provided with the product. By cleaning your NanoHold with a damp cloth or paper towel, you can repeatedly rejuvenate and indefinitely extend the useful life of your NanoHold. If it becomes damaged replace it with a new NanoHold.

What does the actual NanoHold look like?

Below is a picture of a black and a white NanoHold. Each NanoHold also comes with a protective cover (pictured above).

What size are NanoHolds?

NanoHolds are the size of a credit card: 85,6 mm x 53.98 mm (3.37″ x 2.125″). They have an ultra-thin profile, just 0.5 mm (0.02 or 1/50th of an inch). The average credit card is about 50% thicker than a NanoHold.

Will NanoHold interfere with induction charging, WIFI or other wireless functions?

NanoHolds will not interfere with induction charging, and actually helps by keeping your device from coming off the induction charger accidentally. It will not interfere with WIFI, Bluetooth, NFC, or other wireless functions of your device.

Does temperature affect a NanoHold?

NanoHolds work in normal living temperatures from 0° C/32° F to 120° F/50° C.

Will a NanoHold work on horizontal surfaces too?

NanoHolds work like an anti-slip pad when laid flat, to help prevent your device from moving around or falling.

What surfaces will not work with a NanoHold?

NanoHolds will not work on wet or oily surfaces or surfaces that are uneven, dirty, or porous. Certain chemicals or solvents can damage them. Unsure of your surface or suction contact? Exercise caution before letting go of your device.

Can I take the NanoHold off my device once it is installed?

Yes! When you are all finished using your NanoHold, you can remove it from your device. Simply peel it off. There may be a small ammount of residue remaining from the adhesive when you remove it, this will easily come off with a damp cloth or goo-gone.

Once I remove the NanoHold from one device, can I put it on another device?

No. Once you remove the NanoHold, the adhesive will not bestong enough to safely adhere to a new device. Also, removing the NanoHold sometimes distorts or damages the NanoSuction cells.

People all over the world LOVE NanoHold, you will too!

“it’s amazing” M.A. (Oman)

“Really useful good product. Thanks a lot.” V.N.K. (Netherlands)

“Great product!” P.A. (Singapore)

“Got mine today….love it!” R.H. (United States)

“Thank you the first project which delivered just in time! :-) You made my wife and me happy!” S. (Austria)

“Great product. I travel quite a bit and have a terrible time remembering my hotel room key. Now I just stick the key card on the back of my phone and forget about it. Also convenient when you want to carry just your phone and a credit card.” B.T. (United States)

“Love love love using these. So glad I pledged.” A.S. (United States)

“Works great!” C.H. (Hong Kong)

“Awesome Product, thanks!” R.V.R. (Netherlands)

“Received my nanohold. Love it! Now I get the use for the card that was with it. Thank you! Btw your project is a great example of how Kickstarter projects should get run.” KB (United States)

“Received my yesterday… it’s great! Thanks...Love the retail packaging it came in as well.” D.P. (United States)

“Received my NanoHolds today in Calgary Alberta. So far, exactly as advertised. Well done!” R.F. (Canada)

“Excellent, I strongly recommend it.” T.H. (United States)

“This product works very well!…Great buy!” J.V. (United States)

“Love my NanoHold!! It’s fun to use when taking pics with my friends. Definitely a conversation starter, too! NanoHold is so affordable and gives me a whole different way to use my smart devices!” (United States)

"I just wanted to say, I've been using the nano hold to support my iPad for calls back home to family and it has been very handy. Wanted to thank you again for the handful of nanoholds." A.P. (Abu Dhabi)

“This is such a cool product!! It works as advertised, you just have to follow the directions. I have had mine for months, I use it regularly, and it still performs as it did when it was brand new. Turns heads when used in public, too! :) Great buy for a fun product!!!” C.R.U. (United States)

“Thing works like a charm!!” C.P. (United States)

“Just got mine in Singapore!! Awesome!!!” S.H. (Singapore)

"Amazing product!" M.G. (Malaysia)

“It works well it's cool. But you have to clean it every day so it doesn't lose suction. Also, the first stick is the most intense. I stuck it to my window and I could legit hang off of it haha” J.G. (United States)

"Super cool…… the first one just arrived and I think I have to have some more. Cheers" M.S. (Switzerland)

“I have been using NanoHold and I love it! I have been telling everyone at the dealership about your product and how great it is. Thanks again!” D.T. (United States)

Why do you charge for shipping on eBay but not on your website?

All orders sold through eBay are sent via USPS Priority Mail. This allows for you to track your order! On the website, free shipping does not include tracking.

Post pictures you take with your NanoHold or of you using your NanoHold with these tags: #NanoHold or #NanoHoldSelfie

Note: This is an official NanoHold eBay store/seller for NanoHold. Please do not be fooled by imitators.