Descriptions: |
FAST and FREE SHIPPING WITHIN USA
Revolt
The RaceFlight Revolt flight controller is the most advanced,
performance driven, flight controller everdesigned.Capable of running
32kHz gyro sample, PID loop, and motor loop, processing all calculations
in real time. The Revolt is truly at the top of its class . The Revolt
uses a F405 MPU and an Invensense 20602 gyroin combination with
RaceFlight software to give you the BEST performance possible. This gyro
is by far the most noise free and accurate gyro available.
Performance
The Revolt presents not only the BEST performance, but also the most
STABLEperformance due to the amazing vibration rejection technology
implemented in RaceFlight. Our filters allow your quad to stay in the
air no matter what! Damaged propellers caused by that insane gate clip
on turn 3? Not a problem. You can still finish the race!For most people
tuning is not even required. Our boards come preloaded with software
and defaults that should fly amazing for 99% of people.
In addition to the vibration rejection technology, the SSGgives you
the highest speeds currently possible with the lowest noise floor and
highest sensitivity. The Invense 20602 gyro has never been used in any
flight controller before and definitely gives you the leading advantage
over others.
Software
Our flight controller comes pre-loaded with the latest RaceFlight
Community release. Just go to the google store and download the latest
configurator and you should be ready to connect. Drivers should no
longer be needed.
RaceFlight One is also available in alpha format. Just join our slack at
http://raceflight.net/invite/ and ask to be added to the RaceFlight One
channel. This is truly amazing software, which flies so well you can
completely eliminate prop wash. Setup is a breeze as well, just run a
couple wizards and you will get right up into the air.
Setup Simplicity
Setting up the Revolt is easy. The solder pin layout is easy to read
with motor connections in each corner. Just solder the closest motors
and remember the order 1, 2, 3, 4. Select your voltage on the bottom,
as well as inverted or not. The Revolt also features DFU free updating
and a self-healing and updating bootloader, just in case something does
go wrong.
Features
- Integrated vibration dampening dummies
- Dual inverters for Taranis and Futaba radios
- True hardware radio diversity
- Selectable voltage for your UARTs
- LED Driver for WS2812b programmable LED
- Infrared LED Race Transponder support –just solder an infared LED
to the Revolt and set it up in the RF1 configurator –*** features
coming soon within code
- Future iPhone and Android configurator support –*** features coming soon within code
- High Speed 32khz gyro, lowest noise floor and highest sensitivity gyro everused
- Through hole solder pads – forms an I-Beam when soldered for extra strength
- FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio support
- Integrated buzzer driver
- Voltage and current ADC pins, for full voltage and current monitoring
- Full telemetry output support*** features coming soon within code
- ESC flashing and configuration built into configurator
- Most active software development
- Selectable 3.3v or 5v voltage
- 4 serial uarts
- Bluetooth expandable*** features coming soon within code
- F4 processor
- 16mb of flash memory
- GPS expandable *** features coming soon within code
- Dimensions: 36mm x 36mm
- Mounting holes: 30.5mm squared to center of holes
The RaceFlight Guarantee
In addition to all the other amazing things the Revolt presents,
Revolters get access to RaceFlight’s ticketed tech support which will
include step-by-step help with installation, tuning, and anything else
that may arise with your Revolt. We have by far the best support system
and community in the industry. Join our slack and talk to other users,
or contact support directly.
|