****PLEASE LOOK BELOW FOR MORE SPECIFIC FITMENT INFO****

Chrysler Town & Country 2008 - 2010

Dodge Caravan 2008 - 2010

Dodge Grand Caravan 2008 - 2010

Dodge Journey 2009 - 2010

Volkswagen Routan 2009

DRILLED & SLOTTED ROTOR

Kinetic Rotors are machined from the finest G3000 grade castings. G3000 metallurgy is the industry standard for brake rotor manufacturing. It combines the ideal balance between tensile strength and hardness.

POWERSTOP EVOLUTION CERAMIC BRAKE PAD FEATURES

Powerstop has been a leading supplier of performance brake parts since 1997.

Ceramic pads are 100% non-ferrous, meaning that they do not contain steel or iron, two main causes of brake squeal. Proven low dust formulation.

Most pads come with a constrained layer steel shim with two active rubber layers which results in 6 times more noise reduction than plain steel shims.

THE SCIENCE BEHIND FASTER STOPS!

Cross-drilled rotors can improve stopping power up to 35% over stock rotors as reported in SAE Technical Paper 2006-01-0691 "The Effect of Rotor Crossdrilling on Brake Performance" by two GM engineers. That's why Corvette, Porsche, Mercedes, and BMW vehicles come factory direct with drilled brake rotors. The fact is that the drill holes greatly improve convection heat transfer and the result is more pad bite. The report also states that "it is possible to have too many holes, in which case too much cooling air would be lost before reaching the hottest part of the rotor". Kinetic rotors are designed for optimum rotor cooling and durability with one cooling hole per vane. This also provides superior strength.

STOP ROTOR WARPING!

High rotor temperatures can cause heat spots to form on the rotor which can cause brakes to pulsate. Cross-drilled rotors keep the brakes up to 150 degrees cooler to prevent rotor warping.

GENUINE POWERSTOP EVOLUTION CERAMIC BRAKE PADS!

Most new vehicles come with ceramic brake pads from the factory. Powerstop’s Evolution pads are the perfect replacement for serious street performance. All pads are made using positive mold technology for quiet, consistent braking. Pads are chamfered and slotted like OE pads, and come with dual layer rubber shims.

DYNAMOMETER TESTED USING SAEJ2430 REQUIREMENTS FOR SAFE AND FADE RESISTANT BRAKING

We prefer PayPal and accept all major credit cards. Payment must be received within seven (7) days of checkout, or item will be forfeited, and a non-payment dispute will be opened with eBay and PayPal to recover the closing fees of the sale.

Are the drilled holes and slots directional?

Yes, the rotors are machined based on their orientation on the vehicle. Driver’s side (left) and passenger’s side (right) have unique patterns so the slot trails toward the back of the vehicle. The large rotor pictured above is a right hand (passenger side) rotor.CLICK HERE for guide.

How many pads come in a set?

On listings for front or rear only, one set refers to four individual brake pads, enough for the entire front or rear axle of the vehicle. Front and rear kit listings come with eight individual brake pads, enough for all four wheels of the vehicle. Please note that some applications such as Audi and Corvette, among others, have a unique number of pads based on their caliper design, e.g. a Corvette Z06 set is 12 brake pads for the front and 8 brake pads for the rear. The important thing to understand is that a kit refers to all the parts for the application specified, i.e. front is two complete front wheels; front and rear is four complete front and rear wheels.

Are any modifications necessary to make these rotors fit my vehicle?

No modifications or alterations are needed in order to install our brakes. All parts are designed to be direct original equipment replacement parts with simple bolt-on installation.

Is the brake rotor picture the same as the rotor I will receive?

The photo in the listing is a generic representation of the item you will receive. With over 1700 different part numbers, it is not possible for us to post unique pictures for each application due to graphic storage space limitations. The purpose of the image is for visual representation of a typical pattern of the machined drill holes and slots as well as the silver zinc surface finish.

Will I get tracking information?

Yes, tracking information is automatically sent to your email address when the items have been shipped. Typical handling time is one to three business days after payment has cleared, so you will typically get the e-mail from Fedex within 72 hours. Please check your junk mail box for the Fedex tracking information as it sometimes ends up there.

What causes rotor warping?
CLICK HERE for guide.

Drilled vs Slotted rotors, what is better?
CLICK HERE for guide.

Metallic vs Ceramic Brake Pads.
CLICK HERE for guide.

Jeep Grand Cherokee - Do I have Akebono or ATE/Teves front calipers?
CLICK HERE for guide.

Toyota Trucks - Do I have S13WE or 13WL Calipers?
CLICK HERE for guide.

Brakemotive is dedicated to customer satisfaction. With over 1000 vehicle applications, we guarantee the highest quality standards. Visit our Brakemotive store for more information. Our team has more than 20 years of automotive experience so you can shop with confidence. A Brakemotive representative is available at 877-477-9320, or you can e-mail us at brakemotive@gmail.com. We are available Monday through Friday 8:30AM to 6:00PM(CST) and Saturday 10:00AM to 3:00PM(CST)

Brakemotive rotors and pads have a 120 day warranty against workmanship defects and warping.

Brakemotive rotors have a 1 year warranty against cracking when purchased with Powerstop brake pads.

Warranty is valid from the date of purchase provided that the product has not been subject to abuse or misuse in its use or installation, or has not been subject to modification or alteration. Products must be installed per the manufacturer's instructions. Warranty does not cover normal wear and tear or damage caused by negligence, lack of maintenance, abnormal operation, track racing, off-road use, or improper installation. The warranty is non-transferable. All warranty claims require a proof of purchase, and an RGA is required from Brakemotive for the return. Customer will be responsible for return shipping cost. Compensation for any warranty claim will be either store credit or replacement of a product of equal value. No additional fees for installation or any other cost will be reimbursed with warranty claim. Only one warranty claim is allowed per customer. Any returns for parts not needed will be subject to a 15% restocking fee. Brakemotive neither makes nor implies any other warranty as to suitability for purpose other than expressly warranted here and is not liable for any form of consequential damage losses or cost.