Description
Provides protection for the passenger compartment from mud, rain, snow, wind and direct overhead sunlight. Zippered doors are completely removable and offer a convenient, affordable way to enclose the sides of the cab; helping to hold in heat during cold outings or to be removed when the cab gets to warm. The heavy-duty UV resistant woven polyester fabric with vinyl backing, along with the clear vinyl windows will help keep you clean, dry and comfortable.
IMPORTANT! Installation of the cab enclosure requires the removal of all accessories that are attached to the exterior of the roll cage (e.g. hard top roof). See the cab enclosure installation requirements for important information prior to purchasing.
See the installation instructions for more info.
|
|
Door Operation
To help you understand how the doors function, please note the following:
- The doors are attached to the cab enclosure with heavy-duty plastic zippers.
- Both driver and passenger doors zip closed toward the front of the vehicle and unzip toward the rear of the vehicle.
- When zipped closed, the zipper pull that will be used to open and close the door will be located on the bottom front corner of the door near the floor. IMPORTANT! When sitting inside the vehicle, the operator must be able to adequately bend at the waist in order to reach the front zipper pull located near the floor.
Entering and Exiting the Vehicle
After the cab enclosure is fully installed and the doors are zipped closed, follow these instructions to enter and exit the vehicle:
- Grasp the front zipper pull and unzip the door toward the rear of the vehicle, stopping at the top rear corner of the door. (See note below)
- Enter the vehicle.
- Grasp the door, supporting it with one hand so that the zippers are aligned and near one another.
- Grasp the front zipper pull (now located at the top, rear corner of the door) and zip the door closed toward the front of the vehicle completely.
- To exit the vehicle, reverse the steps above.
Note: Optionally, you may roll the door toward the rear of the vehicle and secure it to the cab with the attached straps. |
|
Features
- Heavy-duty ProtekX Extreme polyester fabric with water-resistant PVC backing and exterior coating for maximum weather and abrasion protection.
- Enhanced venting system integrated into the enclosure for added circulation.
- Large clear vinyl windows.
- Doors can be unzipped, rolled back and secured with the attached rip-and-grip straps or completely removed for easy cab access and increased ventilation in warmer weather.
- Attaches to the roll cage and vehicle body with straps, tension panels, buckles and adhesive-backed rip-and-grip closure tabs for a weather resistant passenger compartment.
- Two year manufacturer's limited warranty; click here for details.
|
|
Product Details
Click an image below for a closer look at the high-quality craftsmanship built into these products. Note: Stock images below are for representation purposes only.
|
|
Removable Doors
Doors can be unzipped, rolled back and secured with the attached rip-and-grip straps or completely removed if desired. |
|
Cinch-Tight Straps*
Rubberized cinch-tight straps grip the roll cage pillars for a secure installation. |
|
Rip-n-Grip Strips*
Adhesive backed rip-n-grip strips (similar to Velcro) for a quick and secure installation. |
|
Tension Panel Straps*
Adjustable straps with click-close connectors are attached to tension panels that keep the roof material taunt on the roll cage. |
|
Strap Keeper*
A strap keeper is included on long straps for an organized clean look. |
|
Venting System
Enhanced venting system integrated into the enclosure for added circulation. |
|
Easy Storage
Folds flat for easy storage when not in use. |
|
ProtekX™ Extreme
Heavy-duty ProtekX Extreme polyester fabric with water-resistant PVC backing and exterior coating for maximum weather and abrasion protection. |
*Not available on all cab enclosures. Click the installation instructions link above to see which product details are included with this enclosure. |
|
Compatibility
This item is designed to fit the following:
|
|
- SPECIFIC Polaris Ranger Vehicles
IMPORTANT! See compatibility chart below for details.
|
|
YEAR |
COMPATIBLE POLARIS RANGER MODELS |
CHASSIS
SIZE |
2009 |
2x4 500; 2x4 500 CARB; 2x4 500 EFI; 2x4 500 EPS; 4x4; 4x4 500 EFI; 4x4 500 EPS; XP; XP 700; XP 700 EFI; XP 700 EPS; HD; HD 700; HD 700 EFI; HD 700 EPS; 6x6; 6x6 700; 6x6 700 EFI; 6x6 700 EPS; |
FULL |
2010 |
H.O. 500; H.O. 500 EFI; H.O. 500 EPS; XP; XP 800; XP 800 EFI; XP 800 EPS; HD; HD 800; HD 800 EFI; HD 800 EPS; 800 EFI; 800 EPS; 6x6; 6x6 800; 6x6 800 EFI; 6x6 800 EPS; |
FULL |
2011 |
XP; XP 800; XP 800 EFI; XP 800 EPS; HD; HD 800; HD 800 EFI; HD 800 EPS; 800 EFI; 800 EPS; 6x6; 6x6 800; 6x6 800 EFI; 6x6 800 EPS; Diesel; Diesel 900; Diesel 900 EPS; |
FULL |
2012 |
XP 800; XP 800 EFI; XP 800 EPS; HD; HD 800; HD 800 EFI; HD 800 EPS; 800 EFI; 800 EPS; 6x6; 6x6 800; 6x6 800 EFI; 6x6 800 EPS; Diesel; Diesel 900; Diesel 900 EPS; |
FULL |
2013 |
800 EFI; 800 EPS; XP 800; 6x6; 6x6 800; 6x6 800 EFI; 6x6 800 EPS; Diesel; Diesel 900; Diesel 900 EPS; |
FULL |
2014 |
800 EFI; 800 EPS; XP 800; XP 800 EFI; XP 800 EPS; 6x6; 6x6 800; 6x6 800 EFI; 6x6 800 EPS; Diesel; Diesel 900; Diesel 900 EPS; (excludes DIESEL HST); |
FULL |
2015 |
6x6; 6x6 800; 6x6 800 EFI; 6x6 800 EPS; |
FULL |
2016 |
570 FULL-SIZE; 570 FULL-SIZE EFI; 570 FULL-SIZE EPS; 6x6; 6x6 800; 6x6 800 EFI; 6x6 800 EPS; (excludes all XP versions) |
FULL |
2017 |
570 FULL-SIZE; 570 FULL-SIZE EFI; 570 FULL-SIZE EPS; 6x6; 6x6 800; 6x6 800 EFI; 6x6 800 EPS; (excludes all XP versions) |
FULL |
IMPORTANT! If you don't see your vehicle listed above or you need help choosing the correct accessories for your vehicle, please have your 17-character Vehicle Identification Number (VIN) available and contact us for assistance before purchasing. |
|
07.5 |
Specifications
- Manufacturer: Classic Accessories®
- Collection: QuadGear
- MPN: 18-122-010401-00
- UPC: 052963017960
- Color/Pattern: Black/Solid
- Materials:
- Fabric: Heavy-duty Polyester
- Undercoating: PVC (laminated to the polyester fabric)
- Clear Windows: PVC (poly vinyl chloride)
- Click-Close Connectors: Plastic
- Quick-Release Buckles: Plastic
- Loop Rings: Plastic
- Straps with connectors or buckles: Nylon
- Straps with loop rings: Rubberized Nylon with Hook & Loop Fastening System
- Ladder Lock Buckles: Plastic
- Rip-N-Grip Straps: Nylon web straps with hook and loop fastening system (similar to Velcro)
- Rip-N-Grip Strips: Adhesive-backed nylon strips with hook and loop fastening system (similar to Velcro)
- Zippers:
- Slider: Metal
- Pull Tab: Metal
- Chain: Plastic
|
|
Included with this Purchase
(1) - UTV Cab enclosure which includes the following components:
- Front windshield (integrated)
- Roll cage top (integrated)
- Rear window (integrated)
- (2) Zippered doors (removable)
- (1) Roll of adhesive-backed rip-n-grip tape (hook-n-loop)
|
CAPS07.5
|
Optional 300 Watt 12V Heater*
Our 300 watt 12V heater is the perfect accessory for the cabin enclosure sold in this listing. Please click here for details.
*Sold separately. |
|
|