★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
We are one of the authorized distributors of the real TL866
programmer's manufacturer,
海口鑫工电子有限公司 (Haikou Xingong Electronics Co., Ltd.)
Our company information: https://www.autoelectric.cn/EN/TL866_Dealer.html
Our Paypal Business account is
Shanghai Yanshuang electronic Co. Ltd.
English manual download
link: https://www.autoelectric.cn/EN/download/TL866_programmer_manual.rar
If you want to get more
precise details about TL866 programmer, please click the following
link to see the two great videos made by one of our UK customers,
Trevor. Thank you very much for his sincere and selfless help.
Software
video link: https://youtu.be/La8T5b3m4NE
★ ★ ★ ★ ★ ★
High speed USB
Programmer TL866A Full
Pack support ICSP SPI in-circuit programming including
test clip+ 25 SPI Flash adapter support
in-circuit programming
support more
than 13000 chips!!!
Please click the following
link to upgrade the latest software and firmware: (V6.6
latest version, can support WIN7/8 64 Bit system) (will
be frequently updated in the future)
Latest software download link: https://www.autoelectric.cn/MiniPro/minipro_setup.rar
Support Device List: https://www.autoelectric.cn/minipro/MiniProSupportList.txt
New Generation
Automatic TL866A Universal Programmer Set
Include multifunctional ICSP interface for PIC AVR MCU and AT45XX SPI programming.
Performance:
Well-designed cheap professional programmer, Production of high-density SMD
technology, a unified user interface, easy to use, fully functional, reliable
program running of application software, ultra-small code,runs faster, supports
bilingual(English and Chinese), it can automatically identify the operating
system to install and run under WIN 2000/WIN XP/WIN 2003/WIN 2008/WIN
VISTA/WIN7/WIN8.
Note: The following performance list
★The great part of other
development programmers are not comparable to its functions,that is not easy to
reach.
★High Speed Programming:This programmer has Built-in MCU with high-performance
and high-capacity USB interface ,at the communication speed of 12Mbps, being in
line with ( For each chip) well-designed programming algorithm and USB
high-speed communications. It may be one of the fastest integrated development
programmers, the speed has been met the needs of small-quantity efficient
production.
Compared to similar products, some chips' programming speed is several times
faster, even more than 10 times. For 4Mbits parallel FLASH ROM, the upgrade
programmer (Version 3.01 or above) takes only about 35 seconds to finish
programming (the total time of erase, write, verify). It only takes about 32 +79
seconds to read and write a 32MB TE28F320. In most cases, the parallel flash
chip can be programmed at the same time it can be verified. The programming will
be immediately stopped if there is an error. It only takes about 12 sec (read)
+18 sec (write) to read and write an 8 Mbits of serial 25P80. It only takes
about 98 sec +160 sec to read and write a chip of 64MB capacity. It supports
common 8-PIN and 16-PIN 25 series chip with large capacity.
Note: 16MB or larger capacity flash chip cannot be programmed by general
programmers because of programming speed, while the TL866 programmer can widely
support 64MB Serial and parallel series of chips to 48PIN. It provides with the
remarkable quality that is distinct from other common programmer.
◆ support a wide range of chips: All kinds of 26, 27, 28,
29, 37, 39, 49, 50 parallel ROM, EPROM, EEPROM, 24, 25, 35, 85, 93, 95 Series
EEPROM, Serial parallel ROM chips, fully supporting to the 48-PIN chips of
64Mbits capacity. It also supports a variety of models of 51 series of
microcontroller, AVR microcontroller, including ATMEGA series, ATtiny Series,
AT90XXX Series MCU, MICROCHIP PIC10 PIC12 PIC16 PIC18 MCU, programming of GAL
programmable logic device, SRAM test, 54/74 and CMOS4000 series IC comprehensive
function tests. At present, it can actually program more than 12000 chips. More
chips will be supported in the process of the future upgrade.
★Unique ultra-low power: The whole programmer is equipped with the ultra-low
power chips and it is furnished with electricity via USB Interface. It is the
first comprehensive programmer to program all the chips without an external
power supply. Their own power consumption is less than 20mA (it is 7mA when the
programmer is not programming, LED power indicator use largest electricity, 5mA
each one) and Programming power loss rate is less than 20% so that the
programmer can supply the high VCC VPP programming electric current.
Programmable chip can be provided with enough programming power (the largest
programming power output is 2 watts that is impossible for a chip to use 2 watts
of programming power). And you hardly feel the heat of the programmer after such
long continuous work.
★easily portable performance: This is one of the smallest products in the world
and the dimensions are 10CM*6CM*2.5CM (it is as small as a driving license). In
addition, you don’t need to carry with an external power supply because of its
ultra-low power that makes it more portable.
◆Programmable programming power supply: VPP and VCC programming voltages are
independently program-controlled: programmable
VCC is from 3.3V to 6.5V; VPP is from 3.3V to 21V. The
fluctuation of power supply is minor because of the multi-stage LC filter.
★Best overvoltage, overcurrent protection: VCC, VPP power
supply of the Programmer is furnished with the independent Grade 3 overcurrent
protection and the protection of automatically cutting off power supply. Each
pin of 40-pin programming socket has VPP overvoltage protection. It can
effectively prevent from putting a chip in the wrong place or short circuit due
to other reason. In this programming case, it can also stop VPP high voltage
from coming back to the internal of the programmer and damaging the device.
Really make sure that the programmer will not be damaged when there is any
worst-case short circuit. At the same time, the programmed chip can be
efficiently protected.
This programmer will cut off the programming power supply VPP and VCC within
100us and send the message to the application program when there is short
circuit. The programmer and PC won't be reset when there is short circuit
because of the multilevel overcurrent protection.
◆ 40PIN universal pin: It is the most versatile pin among 40PIN quasi-universal
pins. You don't need to move or turn around the chip when programming, just
congruously put the chip forward and the handle direction of the programmer is
the PIN1 place. Its design accords with the common operating habit of user.
◆ This programmer is equipped with upgrading Function of the built-in hardware
firmware program that can make sure your programmer's firmware flash and
application software can be timely updated. You can complete the upgrade by
downloading the upgrading program through the manufacturer's website.
★Second development function of chip serial number:This programmer has a variety
of automatic numbering functions that are used commonly. You can get any serial
number through DLL Dynamic Link Libraries by using the custom algorithm. In mass
production, the function enables each chip to produce only one identifying
information that can be encrypted by the custom algorithm. So you can
effectively protect your rights as a customer.
★Unique
universal serial programming interface ICSP:(Only TL866A can support, TL866CS
cannot use this function)
This TL866A programmer
can program through the 40-PIN universal socket and is provided with an ICSP
serial programming port. For some in-circuit serial programmable chips, you can
program MCU by choosing ICSP port. You can get the clear instruction diagram in
the programming software for the ICSP port wiring method. That is to say, you
can directly program and update the chip soldered on the board.
Note: Now ICSP can in-circuit serial program ATMEL89S51, ATMEL89S52, AT45DBxxx,
a whole series of AVR ATMEGAxxx, MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx, as
well as a full serial of SYNCMOS SM59Dxx SM59Rxx. The variety of microcontroller
that can be supported in-circuit programming will be continually increased in
the future. Six ICSP wires of this programmer, except a ground wire, other wires
led full functional I2C, SPI and UART serial main wire, be suitable for all
kinds of serial communication. In addition, each wire can supply VCC, VPP or GND
with high current.
★superb 54/74F/LS/HC CMOS4000 series IC functional tests:
This is the first development programmer to test the common logic integrated
circuit and this test can be located the errors of logic gate circuit, as well
as test any possible input combinations of integrated circuit.
◆Programmer self-testing function: This programmer can test itself on each pin
of VPP, VCC, GND and I/O information, at the same time it can run an inside
short-circuit test on VPP, VCC current.
★AVR microcontroller one-to-one soft encryption: AVR microcontroller has an RC
Calibration (calibrate bytes). Only one of dozens of chips may have the same
bytes value and it cannot be modified. Microcontroller software can read this
value and determine whether the code is used by other chips. Through custom
encryption algorithm, it can stop those who decrypt chips with ulterior motives
from directly using. The encryption algorithm is so complex that it is not easy
to decrypt. But, about "encryption", there is a problem for developers - each
chip is different - it is impossible to manually calculate one by one and
respectively compile source code if the algorithm is complex. This programmer
can automatically read into RC bytes before programming. The developer can get
the bytes value of the chip in the DLL dynamic function and then automatically
calculate the encrypted data according to the request and put it in the memory,
efficiently completing mass production. (A detailed encrypted instance of the
ATMEGA8 in the installation package is available for reference)
★Unified and convenient user interface: The user interface is well-designed and
is in complete accord with the operating habit of the Windows series of
software. Built-in binary editer is comparable to pure professional editing
software. You can directly read, write and modify the files such as BIN format,
HEX format, JED format and so on. In addition, it has the complete and practical
project mode that makes the mass production more convenient and safer.
The
chip supporting range:
◆All kinds 26 27 28 29 37 39 49 50 Parallel ROM, EPROM, EEPROM
High-speed and wide-support
It can support TSOP32 TSOP40 TSOP48 chip to 64MBits and the programming speed is
5-10 times as fast as the similar.
◆24 25 35 45 85 93 95 Series EEPROM
It can widely support series chips and the 8-16 PIN 25 series chips can be
supported to 64MBits capacity.
◆ Hundreds of the 51 series microcontroller
◆ AVR microcontroller, including ATMEGA series, ATtiny series, AT90XXX series
microcontroller
AVR microcontroller can complete a one-to-one soft encryption by RC calibrating
bytes.
It can support high-speed parallel programming and at the same time all AVR
ATMEGAxxx chips can be supported SPI series download programming by using ICSP
interface.
TQFP64, TQFP100PIN AMEGAxxx chips can be supported.
◆Microchip PIC10 PIC12 PIC16 PIC18 Series microcontrollers:
As for PIC series chips, it can support more than 300 models and more than 900
types of packages. It is one of the most comprehensive programmer of supporting
PIC chips. For all kinds of PIC chips, it can program with optimization and high
speed strictly according to the manufacturer manual. For the majority of chips,
it can support ISCP in-circuit programming and at the same time it can program
by using programming socket.
◆ GAL programmable logic device programming
It can support the common PLD device.
◆ SRAM Test
It can support common 24 61 62 DS12 series SRAM test, respectively data line
testing, the address line testing, memory cell incremental testing and unit
testing.
◆ superb performance in 54/74F/LS/HC CMOS4000 series IC comprehensive function
test:
This is the first development programmer that can test common logic IC. This
test can locate the logic gate errors and get any possible input combinations of
IC.
Programmable chips12700 +, the upgrade process will add more chip support.
At present, it can support more than 12700 chips and the types will gradually
increase in the future upgrade.
List of common chip programming rate
Here, the real testing programming time that common chips
need to spend is listed. These chips are not intended to pick out and you can
see the similar chip reference table for the similar. The programming time is
proportional to the capacity. That is to say, for the similar chip, the larger
capacity the chip has, the more time the programming spends. Compared to similar
products, some chips' programming speed is several times faster, even more than
10 times. For 4Mbits parallel FLASH ROM, the upgrade programmer (Version 3.01 or
above) takes only about 36 seconds to finish programming (the total time of
erase, write, verify). It only takes about 32 +79 seconds to read and write a
32MB TE28F320. In most cases, the parallel flash chip can be programmed at the
same time it can be verified. The programming will be immediately stopped if
there is an error. It only takes about 12 sec (read) +18 sec (write) to read and
write an 8 Mbits of serial 25P80. It only takes about 98 sec +160 sec to read
and write a chip of 64MB capacity. It supports common 8-PIN and 16-PIN 25 series
chip with large capacity. So the programming speed is far beyond comparison.
Note: 16MB or larger
capacity flash chip cannot be programmed by general programmers because of
programming speed, while the TL866 programmer can widely support 64MB Serial and
parallel series of chips to 48 PIN. It provides with the remarkable quality that
is distinct from other common programmer.
Total time = erase time + programming time + check time
The programmer in strict accordance with manufacturers require programming, and
will never sacrifice the reliability of the programming in order to improve
programming speed.
This programmer can work strictly according to the manufacturer manual
and never sacrifice the programming reliability in order to improve programming
speed.
Common ROM chip programming time: (Unit: second)
Type |
IC |
Capacity |
Erase |
Read /verify |
write |
Read+write |
remarks |
27Cxxx |
27C512 |
512Kbits |
/ |
2S |
20.8S |
22.8S |
28PIN |
27C010 |
1Mbits |
/ |
4S |
34.2S |
38.2S |
32PIN |
27C1024 16bit |
1Mbits |
/ |
4.1S |
19.6S |
23.7S |
40PIN |
FLASH 27Cxxx |
W27E257 |
256Kbits |
0.1S |
1S |
10.4S |
11.5S |
28PIN |
SST27SF512 |
512kbits |
0.1S |
1.4S |
20S |
21.5S |
28PIN |
W27C010 |
1Mbits |
0.2S |
2.3S |
33.4S |
35.9S |
32PIN |
FLASH EEROM |
N28F020 |
2Mbits |
0.6S |
3.1 |
10.7 |
14.4S |
32PIN |
AT29C020 |
2Mbits |
0.2S |
3.1 |
10.9 |
14.2S |
W29C020 |
2Mbits |
0.3S |
3.1 |
11S |
14.3 |
AM29F040 |
4Mbits |
7.9S |
9.2S |
26 |
43.1S |
M29F002 |
2Mbits |
2.5S |
4.6S |
19.5S |
25.6S |
SST39SF020 |
2Mbits |
0.4S |
3.6S |
15.6S |
19.6S |
AT49F002 |
2Mbits |
1.2S |
3.6S |
16.4S |
11.2S |
W39V040AP |
4Mbits |
0.1S |
9.2S |
27S |
36S |
M50FW040 |
4Mbits |
7S |
9.2S |
25 |
41.2 |
INTEL82802AB |
4Mbits |
4S |
9.2S |
25S |
38 |
AM29F200 |
2Mbits |
3.7 |
2.0 |
8.6 |
14.3 |
48PIN |
AM29LV160DB |
16MBits |
27 |
16 |
50 |
83 |
TE28F320C3B |
32Mbits |
29 |
32 |
79 |
130 |
AT48BV8192A |
8Mbits |
5 |
8 |
28 |
41 |
Serial EEPROM |
24C02 |
2048bits |
/ |
0.1S |
0.3S |
0.4S |
8-16PIN |
AT24C256 |
256Kbits |
/ |
4.2S |
8.2S |
12.4S |
AT24C512 |
512Kbits |
/ |
8.4S |
13.5S |
21.9S |
25080 |
8192bits |
/ |
0.01S |
0.1S |
0.1S |
25320 |
32Kbits |
/ |
0.1S |
0.5S |
0.6S |
25LC1024 |
1Mbits |
0.2S |
1.5S |
3.9S |
4.6S |
EN25T80 |
8Mbits |
8.4S |
12S |
18S |
38.4S |
MX25L8005 |
8Mbits |
5.8S |
12S |
17S |
34.8S |
MAX25L6405 |
64Mbits |
42S |
98S |
166S |
302S |
95320 |
32Kbits |
/ |
0.1S |
0.5S |
0.6S |
35080 |
8192bits |
/ |
0.1S |
0.1S |
0.2S |
93C46 |
1024bits |
|
|
|
0.1S |
93CS56 |
2048bits |
0.1 |
0.1 |
0.4 |
0.6S |
93C66 |
4096bits |
0.1 |
0.1 |
1.2 |
1.4S |
93C86 |
8192bits |
0.1 |
0.1 |
2.4 |
2.6S |
|
microcontroller programming time list: (Unit: second)
IC |
Erase |
Read C |
Write C |
Read E |
Write E |
Total T |
Remark |
AT89C51 4K |
0.3 |
0.3 |
5.3 |
/ |
/ |
5.9 |
|
AT89S52 8K |
0.3 |
0.4 |
1.1 |
/ |
/ |
1.8 |
|
AT89S8253 12K+2K |
0.3 |
0.7 |
3.7 |
0.1 |
0.7 |
5.5 |
|
AT89C4051 4K |
0.2 |
0.2 |
6.4 |
/ |
/ |
6.8 |
20P |
SST89E58 32K+8K |
0.3 |
1.5 |
3.5 |
0.4 |
0.8 |
6.5 |
|
SST89E564 64K+8K |
0.3 |
3.0 |
7.0 |
0.4 |
0.8 |
11.5 |
|
ATMEGA8 8K+512 |
0.05 |
0.3 |
1.8 |
0.1 |
0.5 |
2.8 |
|
ATMEGA48 4K+256 |
0.05 |
0.1 |
0.9 |
0.1 |
0.1 |
1.25 |
|
ATMEGA162V 16K+512 |
0.1 |
0.6 |
2.5 |
0.1 |
0.4 |
3.7 |
|
ATMEGA8515 8K+512 |
0.1 |
0.3 |
1.8 |
0.1 |
0.5 |
2.8 |
|
ATTINY13 1K+64 |
0.02 |
0.1 |
0.7 |
0.01 |
0.04 |
0.9 |
8P |
ATTINY2313 2K+128 |
0.01 |
0.1 |
0.7 |
0.02 |
0.04 |
0.9 |
|
PIC10F222 1K |
0.2 |
0.1 |
1.0 |
/ |
/ |
1.3 |
|
PIC12F629 2K+128 |
0.1 |
0.1 |
2.2 |
0.1 |
0.3 |
2.8 |
|
PIC16F873A 8K+128 |
0.1 |
0.5 |
4.5 |
0.1 |
0.8 |
6.0 |
|
PIC18F4550 32K+256 |
0.5 |
3.7 |
5.6 |
0.3 |
1.2 |
11.3 |
|
PIC18F67J10 128K bytes |
0.5 |
16 |
20 |
/ |
/ |
36.5 |
|
PIC16C712 2K |
/ |
0.1 |
0.9 |
/ |
/ |
1.0 |
|
PIC16C74B 8K |
/ |
0.4 |
3.5 |
/ |
/ |
3.9 |
|
GAL16V8 |
0.8 |
1.4 |
3.4 |
/ |
/ |
5.6 |
|
|
The package
includes:
· One True-USB TL866A Programmer with High Quality 40pin ZIF
· One USB Cable (for both power supply and data communication)
· One Installation CD with latest MiniPro software
· One PLCC IC extractor
· Nine adapters:
1) SSOP8 and SOP16 SMD adapter
2) SOIC 8-16 SMD adapter
3) PLCC32-DIP28 adapter (can adjust voltage)
4) PLCC32-DIP32 adapter
5) PLCC44-DIP40 adapter
6) SOIC8 ZIF adapter(150mil)
7) SOIC8-DIP8 ZIF adapter(200mil)
8) SSOP8 ZIF adapter (170mil)
9) SOIC28-DIP28 ZIF adapter(300mil)
· One ICSP cable(6pins)
· One 25 SPI Flash adapter (without
this adapter, the clip cannot be used on TL866 to program SPI 25 Flash chips!)
· One SOIC8 SMD Programming/Testing Clip (support to program the chip on board,
width: 150mil and 200mil)
· One 8-Pin Dupont jumper cable
· One English manual (chm format document)( Our new and old customers can
contact us to ask for the manual. I believe it will be helpful to your
operation. The manual interface is as below:)
About
25 SPI Flash adapter in detail:
This adapter can be used in combination with the testing clip to program the SPI
25 Flash chip in circuit. That is to say, You can upgrade BIOS of computer
motherboard without removing the chip from motherboard.
There are many factors that affect the ISP in-circuit programming. One of the
main issues is the poor signal quality because many circuits fail to be designed
for the in-circuit-programming originally. The poor signal quality will cause
the in-circuit-programming instability or failure. This adapter is designed for
the signal enhancement when doing in-circuit programming. There is a signal
driver chip that can make in-circuit-programming signal stronger and make
programming more reliable. It can greatly improve the success rate of the
in-circuit-programming.
It works on any programmers for SPI 25 Flash chips in-circuit programming.
It works on TL866A or CS programmer for SPI 25 Flash chips in-circuit
programming.
For
example: motherboard upgrade for BIOS chip W25X80. In combination with this
adapter, the testing clip can make the in-circuit programming much easier.
Please note: without this adapter, the clip cannot be used on TL866 programmer
to program SPI 25 Flash chips!
Precautions for power when in-circuit programming:
TL866 programmer can provide programming power (3.3V-15V, 5W), BUT in most cases
the power provided by ISP programmer is not sufficient to make the target board
work normally, therefore, we
preferably recommend to use the self-contained power of the target board.
During the programming, if the self-contained power of the target board is
needed, that is, working voltage (VCC) and programming voltage (VPROG), all
target boards must ensure their correct programming voltages, which are
determined by the chips that need to be programmed and other circuits, please
refer to the programming manual of this chip for detail.
If it is required to verify the programming chip with different voltage, PCB
board must be able to provide working voltage with different range of accuracy.
This is a hot
selling programmer. You can see part of feedback our customers left on July as
below: