This is just a Sounder and requires a connection to a
voltage source. It does not have a built-in triggering
mechanism or automatic shut-off.
It can be used in your own home projects when used
with sensor switches or controls that connect it to a
6 to 15 volt external power supply ...or... It can also
be added to existing security systems that provide
connections for additional alarms. In such cases,
if the existing alarm system provides a Voltage
output for additional alarms, just connect it observing
the proper polarity. If the existing alarm system just
provides a relay contact closure, you will need to add
a 12 volt power supply in series with this alarm when
making the connection (observing proper polarities,
of course).
If purchasing more than 6 units, do not pay until you've asked
me to send you a new invoice for the Total. Often times I can
save you money on the shipping costs.
BIG SOUND FROM SUCH A TINY UNIT!
This is one of my most popular Alarms with many
customers coming back to buy more of them.
It's Super Intense High-Pitched 107 DB warble tone
easily makes it the most annoying alarm I've ever
heard, and I've heard quite a few other Piezo Alarms
that claimed a 100 db sound output. Even all the larger
alarms I've heard don't have such a painful way of
encouraging intruders to leave.
The sound it produces is kind of hard to describe as it
isn't exactly two tones, but actually warbles between
two dominant tones with the transition being quite rapid.
Thus, the sound output actually traverses a range of
frequencies between the two dominant tones.
It is this warble effect that actually makes this alarm
more demanding of attention from anyone within earshot,
and it's sound won't easily get buried among other loud
noises in the area (like may happen with other alarms).
It has Red and Black 12 inch wire leads with Red
naturally being the Positive Lead. The documentation
on this alarm does not say whether it can be used
outdoors or not. So although it looks like it may be
weatherproof, I do not guarantee it's use outdoors.
Although this unit will operate with as little as 6 Volts,
it won't produce the full 110db of sound that it can
at 12 volts. It's a simple law of physics that it takes
more power to produce a Greater sound Output.
As you can see below from testing this alarm at
different voltages, the power at which this (and
all other alarms) operate varies greatly and is
determined by the voltage used to power the unit.
Obviously alarms will only produce the maximum
sound output they are designed to produce at the
maximum operating voltage they are designed to handle.
Here is the typical current draw measured at various
voltages and the calculated power consumption for
this device when operated at the those voltages:
At 6 Volts: 66ma, .40 Watt
At 9 Volts: 110ma, .99 Watt
At 12 Volts: 155ma, 1.86 Watt
Be advised that the above figures are typical values
and the unit you receive may vary as much as 10 to
15 percent from the values I measured above. This
should be expected, and considered normal. However,
this variation is very unlikely to ever present a problem
for anyone.
Please Note:
The maximum advertised sound level will only
be produced at the maximum stated voltage
that this alarm is rated for. Lower operating
voltages will result in lower sound levels being
produced. This is true of all piezo alarms, not
just this one. Also, it should not be assumed