This is a lot of four (4) pieces of  QUAD Ganged Potentiometers.  Condition is new, old stock, unused.  Each device comprises four 100k pots.   All four Pots are ganged to a single shaft, providing typical single turn, 270 degree rotation.  All four elements are Log Taper configuration with symmetric resistance profile.  They were designed for PCB thru hole insertion mounting, but the leads have sufficient spacing to enable discrete point to point wiring.   These are high quality resistance elements.  They have fine, precise mechanical function.  These are marked with P/N G-1070 DE.   We believe this may be a 'house numbered' device,

BODY DIMENSIONS:   16mm Depth (behind panel) 13mm Width;  Height (including leads) 22.2mm.
SHAFT DIMENSIONS:  Threaded Portion: 7mm Dia x 10mm;   Knob Portion: 6mm Dia. x ~ 10mm OA length;  with slot.
LEAD DIMENSIONS AND SPACING:   Thru Hold Leads are ~ 0.8mm width x ~3.3mm depth.  OA lead length is ~7.5mm.
         The Thru Hole Lead Array is a symmetric 3 x 4 Matrix, with 4mm X,Y center to center spacing of the pins

YOU WILL RECEIVE FOUR (4) QUAD POTENTIOMETERS FOR ONE BIT PRICE.  Two M7 shaft mounting nuts will be included with each pot as shown in image 4.  The third image shows one of these Pots with leads formed to facilitate discrete wiring. 

This is an unusual versatile, very useful configuration for diverse instrumentation applications and DIY audio projects.
We have wired these into prototype circuits using a soldered, modified Wire Wrap assembly technique with good results.  If you need further information, please inquire.

We will sell and ship ONLY to bidders in Continental US without prior authorization and quoted shipping cost.  If you are NOT in Continental USA, please send inquiry for a shipping quote to your location.  CANADIAN buyer MUST request quote for shipping/mailing charges.