FAST and SAFE shipping from California, USA, w/tracking #.
|
Brand new
FEATURES
1. New type holster, streamline design
2. Large LCD makes the reading clearly
3. Strong antimagnetic and anti-jamming performance
4. Full function protection
5. Unit symbol display, very easy to reading
6. Relative value, frequency/duty cycle measuring, data hold
7. Built-in Buzz
8. Safety Compliance: CAT II 1000 V over voltage standards
TECHNICAL DATA
Basic function |
Range |
Basic accuracy |
DCV |
400mV/4V/40V/400V/1000V |
±(0.5%+4) |
ACV |
4V/40V/400V/750V |
±(0.8%+6) |
DCA |
400uA/4000uA/40mA/400mA/20A |
±(1.0%+5) |
ACA |
400uA/4000uA/40mA/400mA/20A |
±(1.5%+5) |
Resistance |
400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ |
±(0.8%+1) |
Capacitance |
4nF/40nF/ 400nF/4uF/40uF/200uF |
±(3.5%+8) |
Frequency |
100Hz/1kHz/10kHz/100kHz/1MHz/30MHz |
±(0.5%+4) |
Centigrade temperature |
-40℃~1000℃ |
±(0.8%+4) |
Special function |
VC97 |
Diode test |
Yes |
hFE test |
Yes |
Continuity test |
Approx. less than 30Ω±10Ω |
Low battery indication |
Approx less than 2.4V |
Duty cycle measuring |
Yes |
Data hold |
Yes |
Auto power off |
Approx.15minutes |
Function protect |
Yes |
Input impendence |
10 MΩ |
Sampling rate |
3 times/s |
AC frequency response |
40-400Hz |
Operation way |
Manual or auto range |
Max. display |
4000 |
LCD size |
65 x 41mm (2.5 inch x 1.6 inch) |
Battery |
3V AAA×2 (not included) |
Power dissipation |
Quiescent current approx. 2mA |
GENERAL CHARACTERISTIC
Color |
Body: dark grey, holster: orange (pantone No.:1495V) |
Weight |
290g(including battery) |
Meter size |
185×93×35 mm |
Standard accessory |
Test leads, battery, manual, TP01 temperature probe |
| |
| |
STANDARD ACCESSORIES
1.Test leads
2. Manual
3. TP01 Temperature Probe
4. Free black carrying bag
http://analogtechnologies.com/document/ATCR1R5.pdf
This laser driver can rely on this fan to reduce its temperature:
http://www.analogtechnologies.com/Heat_sink.php
This laser driver can be used for building a laser with this TEC controller:
http://www.analogtechnologies.com/tec-controller.html
this laser driver can rely on this TEC to reduce the laser temperature: