Price:
£249.95 (including 20 % tax)
|
|
Ask a question about this product | |
An 11 element Very Low Noise Yagi for serious DX and EME applications
The LFA is especially effective for EME where very low noise antennas are required and many hours development have been spent ensuring the highest levels of performance have been achieved in an antenna that is not affected by wet weather conditions. As a single, double and 4 stack system, the LFA Yagi is the one to have. Our antennas are constructed with the best quality materials in order the best mechanical construction can be achieved, not the cheapest and most profitable! Even a digital caliper is used (with an accuracy of .01mm) to measure the elements during production to ensure they are within 0.2mm of what they should be, this ensures they work as well as our software model predicts.
If you are looking for the best of the best from both a performance and mechanical construction perspective then look no further, you have come to the right place!
Performance Gain: 15.18dBi @ 144.100MHz Gain: 15.20dBi @ 144.300MHz F/B: 36.71dB @ 144.100MHz F/B: 31.86dB @ 144.300MHz Peak Gain: 15.25dBi Gain at 10m above ground: 21.11dBi Peak F/B: 37.65dB Power Rating: 3kw SWR: Below 1.1.1 from 143.700MHz to 145.100MHz Boom Length: 6.193m Weight: 4.02Kg / 8.86LB Turning Radius: 3.129m / 10.26ft Wind Loading: 0.13 Square Metres / 1.44 Square feet Wind Survival: 201KPH / 125MPH Other options available if higher wind loading/survival is required.
Stacking Distance Vertically: 2.4-3.5m (best trade-off 3.4m) Stacking Distance Horizontally: 2.4-3.65m (best trade-off 3.5m) Following figures calculated at 144.300MHz 2 Stacked Vertically @ 3.2m Gain: 18.02dBi 2 Stacked Vertically @ 3.6m Gain: 18.21dBi
2 Stacked Vertically @3.2m F/B: 32.82dB 2 Stacked Vertically @3.6m F/B: 32.25dB
2 Stacked Horizontally @ 3.25m Gain: 17.99dBi 2 Stacked Horizontally @ 3.25m F/B: 32.67dB
2 Stacked Horizontally @ 3.5m Gain: 18.10dBi 2 Stacked Horizontally @ 3.5m F/B: 33.05dB
4 Antennas 3.2m V x 3.4m H Gain: 21.74dBi 4 Antennas 3.55m V x 3.65m H Gain: 21.30dBi Sky Temperature: 223.0 Kelvin @ 144.100MHz G/T Figure: -2.32dB @ 144.100MHz
Specification This antenna has all parasitic elements made from 1/4 inch aluminum rod. The LFA loop is constructed from 4 pieces of aluminum tube. The sections in-line with the parasitic elements are 1/2 inch while the end sections of the loop are 3/8 inch allowing the user to adjust the loop for best SWR. All elements are fully insulated from the boom held in place by high quality UV resistant, RF neutral insulators which in-turn are held to the boom via stainless steel fixings and fittings. The boom is 1.25 inch square (31.75mm) and a boom guy is supplied with this antenna. If you want an antenna to last and perform in all weathers without SWR or bandwidth shifting, this is it.
Azimuth Plot
Elevation Plot
Single antenna 15m above average ground
SWR
Manufactured the right way, not the cheapest way! *Where possible marine grade stainless steel components are used. |
If after browsing through our huge array of items you cannot find what you are looking for contact us. We will always go out of our way to source the product you are looking for.