eBay

Personal delivery to Germany, Austria, Switzerland, France, Netherlands, Belgium, Italy, Czech Republic and other EU countries is possible!!

Technics SP-10MKIII Plattenspieler Turntable Top Zustand

with Technics SH 10B7 obsidian plinth/base, tonearm Technics EPA-100MK2, original manual, original blueprint, platter removal tool, receipt with the original price, 45 rpm adapter

(see photo)

mit Technics SH 10B7 Zarge, Technics EPA-100MK2 Tonarm, Original-Handbuch, Original-Zeichnung, Plattenteller-Entfernungswerkzeug, Rechnung mit dem ursprünglichen Preis, 45 rpm adapter

(siehe Foto)

ohne Tonabnhemer oder Tonabnehmerkopf! / without cartridge or headshell!

Ausgezeichneter Betriebszustand / Excellent working condition

Technics SP-10MKIII – eines der besten Geräte, schauen Sie hier und hier.

Das Gerät ist 100V! / The device is 100V!

Spannungswandler 100v-230v inbegriffen / 100v-230v Voltage transformer included

Das Aussehen und das Zustand ist sehr gut.

The appearance and the condition is very good.

Vorzugsweise persönliche Lieferung oder Abholung.

Personal delivery or pickup preferable.

Technische Daten

Model	Quartz synthesizer DD turntable
Drive system	Direct Drive
Turntable	Copper alloy + aluminum die-cast, diameter 32cm
Turntable weight	10kg
Inertial mass	· Cm 1.1Ton ² (1,100Kg · Cm ² )
motor	Quartz phase-locked control ultra-low-energy electron commutator brushless DC motor
Rotational speed	3 speed, 33 1 / 3,45,78.26rpm
Rotational speed fine adjustment range	0.1% step, quartz lock variable pitch of up to Pasento ± 9.9 (each rotation speed alone)
Starting torque	16kg · cm
Start-up time	0.25 seconds (33 1 / 3rpm)
Stop time	0.3 seconds (33 1 / 3rpm)
Load fluctuation	Within 10kg · cm 0%
Rotation speed deviation	Within ± 0.001%
Wow and flutter	Pasento WRMS 0.015 (JIS C5521) ± 0.021 Pasento Weighted Zero To Peak (DIN45507, IEC98A, Weighted)
SN ratio	DIN-B 92DB (IEC98A Weighted) 60DB DIN-A (IEC98A Unweighted)
Power supply	AC100V, 50Hz / 60Hz
Power consumption	25W
External dimensions	Body: Width 369 × height 113 × depth 369mm control unit: width 166 × height 96 × depth 410mm
weight	Body: 18kg control unit: 6kg

Technics SH-10B7 obsidian plinth

Model	Turntable base
External dimensions	Width 561 × height 175 × depth 466mm
weight	17.3kg (including dust cover)
L	211mm ~ 242mm
Tone arm part	Within 110mm (L is the time of 211Mm) 80Mm within (when L is 242mm)
Accessory arm base	EPA-100mk2 for perforated × 1 hole without × 1
※ L: arm effective length (the length from the needle tip to the axis of rotation) - overhang

Technics EPA-100mk2

Model	Braking variable dynamic damping system universal tone arm
Enable bearing interval	30mm both horizontal and vertical
Arm pipe	Boron Taita Niamu pipe
Arm effective length	250mm
Arm total length range	322mm ~ 350mm
Arm after manager range	66.5mm ~ 94.5mm
Arm height adjustment range	44mm ~ 64mm (helicoid part 20mm)
Overhang	15mm
Horizontal tracking error angle	+1 ° 6 '(the inner circumference of the 30cm record) +2 ° 6' (30cm record outer circumference)
Rotation axis sensitivity	Horizontal and vertical, initial sensitivity 5mg
Arm effective mass	22g (cartridge own weight 6.5g, needle pressure 1.25g)
Arm resonance frequency	9.8Hz (Compliance: 12 × 10 ^-6 Cm / Dyne cartridge own weight 6.5g, when the needle pressure 1.25g)
Arm resonance sharpness (Q)	6dB below (at the time of optimum adjustment)
Needle pressure adjustment range	0 ~ 3g
Shell weight	9.5g (boron, aluminum)
Cartridge mounting dimensions	JIS standard 12.7mm (1/2 inch) Mounting interval
Shell terminal lug	1.2mmφ, rugs for the 4-pin terminal
Apply cartridge weight	5g ~ 10g
Arm mounting hole diameter	62mmφ