Zebra Exotic Wood Veneer in sequence

32 pcs.

192.00 sq. ft.

108in. X 8in.

See my other auction for other exotic wood veneers.

Raw plain veneer with no backing = 1/32”-1/42”

How to cut: Generally cut with a razor/box knife or similar tools and some type of straight edge.

Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.

How to finish: Most any conventional finishing products can be used; staining or clear coating is fine.

Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and should not impact overall quality or satisfaction. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect. If any leaves of the bundle are in poor condition I include them free (not in piece or square footage counts). Some splits are common at the end of all raw wood veneer.

Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.

Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.