Simultaneous VCO and VCF modulation. For full foot pedal control of such modulation effects as vibrato, random pitch, and glissando.
Ideal for Korg MS20 and other synths
Gives two separate output signals from simultaneous modulated VCO and VCF. Essential for the multi-keyboard performer
The Korg MS-04 is and expression pedal
designed to be used with a synthesizer to control various modulation
effects. Applications include: LFO modulated vibrato, pitch-bend 'choke'
effects, and sample-and-hold controlled glissando and random note
effects. Foot control over these and other effects free your hands to
play the keyboard! The MS-04 can be used with Korg and other
synthesizers equipped with external control jacks.
This was designed to work with the Korg MS line of synths and it
provides full control over the LFO or other functions.
LFO: WAVEFORM
Use this to select one of four LFO output waveforms: Cyclic sawtooth and
rectangle waves for vibrato, a random noise waveform for random pitch
and tone color variations, and a 'glissando' waveform which is used with
'bend' for stepped variations.
LFO: SPEED
This knob adjusts the LFO frequency or 'speed' of variation. Turn
clockwise to increase speed.
LFO: LEVEL
This adjusts the range of LFO variation. Press the pedal all the way
down and set this knob to determine maximum variation.
BEND: WIDTH
This adjusts the range of (pitch) bend variation. Turn clockwise (+)
away from the center click-stop for an upwards bend- turn counter
clockwise (-) for a downward bend.
Press the pedal all the way down and set this knob to determine maximum
variation.
LED indicator
This flashes on and off to indicate LFO speed when cords are plugged
into output jacks. Useful for judging speed of vibrato, glissando and
other effects.
Pedal
Controls depth of modulation. Press all the way down for maximum
modulation effect.
OUTPUT-1 Mode Selector
Use to select output mode for OUTPUT-1 jack. Can be set for LFO, BEND or
a combination of the two.
OUTPUT-1 (x 1) jack
This is usually connected to the synthesizer VCO (FM IN) to control
pitch variation. A maximum 1-octave variation is possible (+-1V maximum
variation.)
OUTPUT-2 Mode Selector
Selects output mode for OUTPUT-2 jack.
OUTPUT-2 (x 4)
This is usually connected to the synthesizer VCF (fcM IN) to control
tone color variation. Maximum variation is four times that of OUTPUT-1
(+-4V maximum variation.)
Output Selector
This determines which jacks will provide an output signal. It can be set
for both outputs 1 and 2 together, or for just output 1 or just output 2
alone.MANUAL DOWNLOAD >> http://www.korganalogue.net/korgms/manuals/pp/0401.htmlNB* There are two rubber feet missing off the base of this particular one, which can be obtained online relatively easily.
We specialise in vintage equipment with
an extensive list of synths, drum machines and effects units not all
listed here. We ship securely and will ship worldwide.
Our previous clients include Rudimental,
Mount Kimbie, Route 94, Amine Edge & Dance and many more...so you
are in safe hands!