Analogue Audio
- Audiophile quality components for best sound quality
- Multi-channel 7.1 analogue input for DVD-A or SACD sources
- Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources
- 9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input)
- Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone)
- Zone 3 stereo audio, from analogue inputs, linked to Zone 2, volume control independent
- Support for iPod via Arcam rLead / rDock (independent of RS232 connection)
Digital Audio
- State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding
- Wolfson 8741 high end 24bit 192kHz audio DACs
- Crystal Semiconductor stereo ADC and precision electronic volume controls
- Burr Brown DRV134 Balanced line drivers
- Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio*
- DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6**
- Dolby Volume gain management and Tonal correction processing*
- Dolby Volume processing for balancing of program material gain and tonal balance
- Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz
- 8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input
- Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources with auto lip-sync for compatible displays
Video
- 5 HDMI inputs (up to 1080p, Deep Colour)
- 2 HDMI outputs (up to 1080p, Deep Colour)
- 5 Component inputs, one monitor output (up to 1080i)
- 5 S-video inputs, one monitor output, 2 tape outputs
- 5 Composite video inputs, one monitor output, 2 tape outputs
- Full video up/down conversion & frame rate conversion of all inputs where technically allowed
- Video enhancements (per input): Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction
Custom Install Features
- Independent Zone 2 (audio & video), with fixed/variable volume
- Zone 3 audio with fixed/variable volume (follows Zone 2)
- Balanced audio outputs (XLR) for long cables or active speakers
- RC-5 remote input jacks for all three zones
- IR pass through for source components
- Full suite of discrete IR RC-5 codes, including separate on / off etc
- 12Volt triggers, on / off for zones 1, 2 and 3
- Full duplex RS232 control input for more complex control systems
- Audio streaming and Internet radio via Ethernet port
General
- Supplied with back-lit CR102 learning remote
- control with support for up to 7 other components and a huge on-board code library
- Large, high contrast dimmable VFD front panel display
- User switchable between 120 & 230 volt
- mains supplies
- Size – 435mm (17.1in) wide, 415mm (16.3in)
- deep, 185mm (7.3in) high
- Weight 12kg (26.5lbs) net, 17kg (37.5lbs) packed