Gigabit switch
Cisco Catalyst WS-C2960S-24TS-S
IOS 15.2(2a)E1

+
Power lead (UK order only)
+
Brackets





Full working order
364 day warranty


Switch#show ver
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.2(2a)E1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 10-Dec-14 03:54 by prod_rel_team

ROM: Bootstrap program is C2960S board boot loader
BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(53r)SE, RELEASE SOFTWARE (fc3)

Switch uptime is 7 minutes
System returned to ROM by power-on
System restarted at 01:27:28 UTC Wed Mar 30 2011
System image file is "flash:/c2960s-universalk9-mz.152-2a.E1.bin"
Last reload reason: Unknown reason



This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2960S-24TS-S (PowerPC) processo r (revision B0) with 131072K bytes of memory.
Processor board ID
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
26 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       :
Motherboard assembly number     : 73-12423-06
Power supply part number        : 341-0328-01
Motherboard serial number       :
Power supply serial number      :
Model revision number           : B0
Motherboard revision number     : A0
Model number                    : WS-C2960S-24TS-S
Daughterboard assembly number   : 73-11933-04
Daughterboard serial number     :
System serial number            :
Top Assembly Part Number        : 800-32448-02
Top Assembly Revision Number    : A0
Version ID                      :
CLEI Code Number                : COMGJ00ARB
Daughterboard revision number   : A0
Hardware Board Revision Number  : 0x01


Switch Ports Model                     SW Version            SW Image        
------ ----- -----                     ----------            ----------      
*    1 26    WS-C2960S-24TS-S          15.2(2a)E1            C2960S-UNIVERSALK9-M


Configuration register is 0xF










Product Overview

The Cisco® Catalyst® 2960-S Series Switches are fixed-configuration Gigabit Ethernet switches (Figure 1) that provide enterprise-class Layer 2 switching for campus and branch access applications. They enable reliable and secure business operations with lower total cost of ownership through a range of innovative features including FlexStack, Power over Ethernet Plus (PoE+), and Cisco Catalyst SmartOperations.

Figure 1. Cisco Catalyst 2960-S Series Switches

Product Highlights

Cisco Catalyst 2960-S switches feature:

 24 or 48 Gigabit Ethernet ports

 1G Small Form-Factor Pluggable (SFP) or 1G/10G SFP+ slots

 Cisco FlexStack stacking with 20 Gbps of stack throughput (optional)

 IEEE 802.3at-compliant PoE+ for up to 30W of power per port

 Up to 740W of combined PoE/PoE+ budget

 USB interfaces for management and file transfers

 LAN Base or LAN Lite Cisco IOS® Software feature set

 SmartOperations tools that simplify deployment and reduce the cost of network administration

 An enhanced limited lifetime hardware warranty (E-LLW), providing next-business-day replacement

Applications and Benefits

The Cisco Catalyst 2960-S Series is ideal for:

 Deploying cost-effective wired connectivity in traditional desktop workspace environments

 Implementing quality of service (QoS) to provide priority treatment of voice and critical business applications

 Enforcing basic security policies to limit access to the network and mitigate threats

 Reducing total cost of ownership through simplified operations and automation

Switch Configurations

Table 1. Cisco Catalyst 2960-S Series Switches Configurations

Model

10/100/1000 Ethernet Interfaces

Uplink Interfaces

Cisco IOS Software Feature Set

Available PoE Power

FlexStack Stacking

Cisco Catalyst 2960S-48FPD-L

48

2 SFP+

LAN Base

740W

Optional

Cisco Catalyst 2960S-48LPD-L

48

2 SFP+

LAN Base

370W

Optional

Cisco Catalyst 2960S-24PD-L

24

2 SFP+

LAN Base

370W

Optional

Cisco Catalyst 2960S-48TD-L

48

2 SFP+

LAN Base

-

Optional

Cisco Catalyst 2960S-24TD-L

24

2 SFP+

LAN Base

-

Optional

Cisco Catalyst 2960S-48FPS-L

48

4 SFP

LAN Base

740W

Optional

Cisco Catalyst 2960S-48LPS-L

48

4 SFP

LAN Base

370W

Optional

Cisco Catalyst 2960S-24PS-L

24

4 SFP

LAN Base

370W

Optional

Cisco Catalyst 2960S-48TS-L

48

4 SFP

LAN Base

-

Optional

Cisco Catalyst 2960S-24TS-L

24

4 SFP

LAN Base

-

Optional

Cisco Catalyst 2960S-48TS-S

48

2 SFP

LAN Lite

-

No

Cisco Catalyst 2960S-24TS-S

24

2 SFP

LAN Lite

-

No

Cisco FlexStack

Cisco FlexStack provides stacking of up to four 2960-S switches through an optional module (Figure 2).

The FlexStack stack module is hot-swappable and can be added to any Cisco Catalyst 2960-S switch with LAN Base software. Switches connected to a stack will automatically upgrade to the stack’s Cisco IOS Software version and transparently join the stack without additional intervention.

Cisco FlexStack and Cisco IOS Software provide true stacking, with all switches in a stack acting as a single switch unit. FlexStack provides a unified data plane, unified configuration, and single IP address for switch management. The advantages of true stacking include lower total cost of ownership and higher availability through simplified management and cross-stack features including EtherChannel, SPAN, and FlexLink. Note that cross-stack features must be disabled before removing the stack module from an active stack member switch.

FlexStack also allows mixed stacking: 2960-S and 2960-SF switches can be combined to provide a combination of Gigabit and Fast Ethernet ports in a single switch stack.

Figure 2. Cisco FlexStack Switch Stack

Power over Ethernet Plus - PoE+

Cisco Catalyst 2960-S switches support both IEEE 802.3af Power over Ethernet (PoE) and IEEE 802.3at PoE+ (up to 30W per port) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet® wireless access points, or other standards-compliant PoE/PoE+ end devices. PoE removes the need to supply wall power to PoE-enabled devices and eliminates the cost of adding electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. Table 2 shows the total PoE/PoE+ power available in each 2960-S model.

Table 2. Switch PoE and PoE+ Power Capacity

Switch Model

Maximum Number of PoE+ (IEEE 802.3at) Ports*

Maximum Number of PoE (IEEE 802.3af) Ports*

Available PoE Power

Cisco Catalyst 2960S-48FPD-L

24 ports up to 30W

48 ports up to 15.4W

740W

Cisco Catalyst 2960S-48LPD-L

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960S-24PD-L

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960S-48FPS-L

24 ports up to 30W

48 ports up to 15.4W

740W

Cisco Catalyst 2960S-48LPS-L

12 ports up to 30W

24 ports up to 15.4W

370W

Cisco Catalyst 2960S-24PS-L

12 ports up to 30W

24 ports up to 15.4W

370W

* Intelligent power management allows flexible power allocation across all ports.

Network Security

The Cisco Catalyst 2960-S Series Switches provide a range of security features to limit access to the network and mitigate threats, including:

 Features to control access to the network, including Flexible Authentication, 802.1x Monitor Mode, and RADIUS Change of Authorization

 Cisco SXP to simplify security and policy enforcement throughout the network

 Threat defense features including Port Security, Dynamic ARP Inspection, and IP Source Guard

 IPv6 First-Hop Security to protect against rogue router advertisements, spoofing, and other risks introduced by IPv6

For more information about Cisco security solutions, visit http://www.cisco.com/go/trustsec.

Enhanced Quality of Service

The Cisco 2960-S Series Switches offers intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. Primary QoS features include:

 Four egress queues per port and strict priority queuing so that the highest priority packets are serviced ahead of all other traffic

 Shaped Round Robin (SRR) scheduling and Weighted Tail Drop (WTD) congestion avoidance

 Flow-based rate limiting and up to 64 aggregate or individual policers per port

 802.1p class of service (CoS) and differentiated services code point (DSCP) field classification, with marking and reclassification on a per-packet basis by source and destination IP address, MAC address, or Layer 4 TCP/UDP port number

 Cross-stack QoS to allow QoS to be configured across a stack of 2960-S switches

Cisco Catalyst SmartOperations

Cisco Catalyst SmartOperations is a comprehensive set of capabilities that simplify LAN planning, deployment, monitoring, and troubleshooting. Deploying SmartOperations tools reduces the time and effort required to operate the network and lowers total cost of ownership (TCO).

 Cisco Smart Install enables zero-touch deployment by providing automated Cisco IOS Software image installation and configuration when new switches are connected to the network.

 Cisco Auto Smartports enables automatic configuration of switch ports as devices connect to the switch, with settings optimized for the device type.

 Cisco Smart Troubleshooting is an extensive array of diagnostic commands and system health checks within the switch, including Smart Call Home.

For more information about Cisco Catalyst SmartOperations, visit http://www.cisco.com/go/smartoperations.

Cisco EnergyWise

Cisco EnergyWise empowers IT teams to measure and manage the power consumed by devices connected to the network, providing measurable energy savings and reduced greenhouse gas emissions. EnergyWise policies can be used to control the power consumed by PoE-powered endpoints, desktop and data-center IT equipment, and a wide range of building infrastructure. EnergyWise technology is included on all Cisco Catalyst 2960-S Series Switches.

For more information about Cisco EnergyWise, visit http://www.cisco.com/go/energywise.

Network Management

The Cisco Catalyst 2960-S Series Switches offer a superior CLI for detailed configuration and administration. 2960‑S switches are also supported in the full range of Cisco network management solutions.

Cisco Prime Infrastructure

Cisco Prime network management solutions provide comprehensive network lifecycle management. Cisco Prime Infrastructure provides an extensive library of easy-to-use features to automate the initial and day-to-day management of your Cisco network. Cisco Prime integrates hardware and software platform expertise and operational experience into a powerful set of workflow-driven configuration, monitoring, troubleshooting, reporting, and administrative tools.

For detailed information about Cisco Prime, visit http://www.cisco.com/go/prime.

Cisco Network Assistant

A PC-based network management application designed for small and medium-sized business (SMB) networks with up to 250 users, Cisco Network Assistant offers centralized network management and configuration capabilities. This application also features an intuitive GUI where users can easily apply common services across Cisco switches, routers, and access points.

For detailed information about Cisco Network Assistant, visit http://www.cisco.com/go/cna.

Software Features

Cisco Catalyst 2960-S Series Switches are available with the LAN Base and LAN Lite feature sets. LAN Lite models provide reduced functionality and scalability for small deployments with basic requirements.

Note that each switch model is tied to a specific feature level; LAN Lite models cannot be upgraded to the LAN Base feature set.

For more information about the features included in the LAN Base and LAN Lite feature sets, refer to Cisco Feature Navigator:http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp.

Technical Specifications

Table 3. Cisco Catalyst 2960-S Series Hardware

Hardware Specifications

Flash memory

64 MB

DRAM

128 MB

Table 4. Cisco Catalyst 2960-S Series Performance

Performance and Scalability


LAN Base (-L) Models

LAN Lite (-S) Models

Forwarding bandwidth

88Gbps

50 Gbps

Switching bandwidth*

176 Gbps

100 Gbps

Maximum active VLANs

255

64

VLAN IDs available

4000

4000

Maximum transmission unit (MTU) - L3 packet

9198 bytes

9198 bytes

Jumbo frame - Ethernet frame

9216 bytes

9216 bytes

* Switching bandwidth is full-duplex capacity.

Table 5. Cisco Catalyst 2960-S Series Forwarding Performance

Forwarding Rate: 64-Byte L3 Packets

Cisco Catalyst 2960S-48FPD-L

101.2 mpps

Cisco Catalyst 2960S-48LPD-L

101.2 mpps

Cisco Catalyst 2960S-24PD-L

65.5 mpps

Cisco Catalyst 2960S-48TD-L

101.2 mpps

Cisco Catalyst 2960S-24TD-L

65.5 mpps

Cisco Catalyst 2960S-48FPS-L

77.4 mpps

Cisco Catalyst 2960S-48LPS-L

77.4 mpps

Cisco Catalyst 2960S-24PS-L

41.7 mpps

Cisco Catalyst 2960S-48TS-L

77.4 mpps

Cisco Catalyst 2960S-24TS-L

41.7 mpps

Cisco Catalyst 2960S-48TS-S

74.4 mpps

Cisco Catalyst 2960S-24TS-S

38.7 mpps

Table 6. Cisco Catalyst 2960-S Mechanical and Environmental Specifications

Dimensions (H x W x D)

Model

Inches

Centimeters

Cisco Catalyst 2960S-48FPD-L

1.75 x 17.5 x 15.2

4.5 x 44.5 x 38.6

Cisco Catalyst 2960S-48LPD-L

Cisco Catalyst 2960S-24PD-L

Cisco Catalyst 2960S-48TD-L

1.75 x 17.5 x 11.8

4.5 x 44.5 x 30

Cisco Catalyst 2960S-24TD-L

Cisco Catalyst 2960S-48FPS-L

1.75 x 17.5 x 15.2

4.5 x 44.5 x 38.6

Cisco Catalyst 2960S-48LPS-L

Cisco Catalyst 2960S-24PS-L

Cisco Catalyst 2960S-48TS-L

1.75 x 17.5 x 11.8

4.5 x 44.5 x 30

Cisco Catalyst 2960S-24TS-L

Cisco Catalyst 2960S-48TS-S

1.75 x 17.7 x 11.8

4.5 x 45 x 30

Cisco Catalyst 2960S-24TS-S

1.75 x 17.7 x 11.8

4.5 x 45 x 30

Weight

Model

Pounds

Kilograms

Cisco Catalyst 2960S-48FPD-L

13

5.9

Cisco Catalyst 2960S-48LPD-L

12.5

5.7

Cisco Catalyst 2960S-24PD-L

12.5

5.7

Cisco Catalyst 2960S-48TD-L

9.5

4.3

Cisco Catalyst 2960S-24TD-L

9.5

4.3

Cisco Catalyst 2960S-48FPS-L

13

5.9

Cisco Catalyst 2960S-48LPS-L

12.5

5.7

Cisco Catalyst 2960S-24PS-L

12.5

5.7

Cisco Catalyst 2960S-48TS-L

10.5

4.8

Cisco Catalyst 2960S-24TS-L

10

4.5

Cisco Catalyst 2960S-48TS-S

10.5

4.8

Cisco Catalyst 2960S-24TS-S

10

4.5

Environmental Ranges


Fahrenheit

Centigrade

Operating temperature up to 5000 ft (1500 m)

23º to 113ºF

-5º to 45ºC

Operating temperature up to 10,000 ft (3000 m)

23º to 104ºF

-5º to 40ºC

Short-term exception at sea level*

23º to 131ºF

-5º to 55ºC

Short-term exception up to 5000 feet (1500 m)*

23º to 122ºF

-5º to 50ºC

Short-term exception up to 10,000 feet (3000 m)*

23º to 113ºF

-5º to 45ºC

Short-term exception up to 13,000 feet (4000 m)*

23º to 104ºF

-5º to +40ºC

Storage temperature up to 15,000 feet (4573 m)

-13º to 158ºF

-25º to 70ºC


Feet

Meters

Operating altitude

Up to 10,000

Up to 3000

Storage altitude

Up to 13,000

Up to 4000

Operating relative humidity

10% to 95% noncondensing

Storage relative humidity

10% to 95% noncondensing

Acoustic Noise

Measured per ISO 7779 and declared per ISO 9296.

Bystander positions operating mode at 25°C ambient.


Sound Pressure

Sound Power

Model

LpA (Typical)

LpAD (Maximum)

LwA (Typical)

LwAD (Maximum)

Cisco Catalyst 2960S-48FPD-L

42 dB

45 dB

5.2 B

5.5 B

Cisco Catalyst 2960S-48LPD-L

Cisco Catalyst 2960S-24PD-L

Cisco Catalyst 2960S-48TD-L

44 dB

47 dB

5.4 B

5.7 B

Cisco Catalyst 2960S-24TD-L

Cisco Catalyst 2960S-48FPS-L

42 dB

45 dB

5.2 B

5.5 B

Cisco Catalyst 2960S-48LPS-L

Cisco Catalyst 2960S-24PS-L

Cisco Catalyst 2960S-48TS-L

44 dB

47 dB

5.4 B

5.7 B

Cisco Catalyst 2960S-24TS-L

Cisco Catalyst 2960S-48TS-S

44 dB

47 dB

5.4 B

5.7 B

Cisco Catalyst 2960S-24TS-S

Predicted Reliability

Model

MTBF in hours**

Cisco Catalyst 2960S-48FPD-L

183,498

Cisco Catalyst 2960S-48LPD-L

198,300

Cisco Catalyst 2960S-24PD-L

237,016

Cisco Catalyst 2960S-48TD-L

311,291

Cisco Catalyst 2960S-24TD-L

332,958

Cisco Catalyst 2960S-48FPS-L

189,242

Cisco Catalyst 2960S-48LPS-L

205,052

Cisco Catalyst 2960S-24PS-L

245,604

Cisco Catalyst 2960S-48TS-L

328,058

Cisco Catalyst 2960S-24TS-L

349,824

Cisco Catalyst 2960S-48TS-S

357,740

Cisco Catalyst 2960S-24TS-S

335,014

Cisco Catalyst 2960S-STACK

25,743,890







*Not more than the following in a 1-year period: 96 consecutive hours, or 360 hours total, or 15 occurrences. 
**Based on Telcordia SR-332 Issue 2 methodology

Table 7. Connectors and Interfaces

Ethernet Interfaces

 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

SFP and SFP+ Interfaces

For information about supported SFP/SFP+ modules, refer to the Transceiver Compatibility matrix tables athttp://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html.

Indicator LEDs

 Per-port status: Link integrity, disabled, activity, speed, and full duplex
 System status: System, RPS, Stack link status, link duplex, PoE, and link speed

Stacking Interfaces

Cisco Catalyst 2960-S FlexStack stacking cables:

 CAB-STK-E-0.5M FlexStack stacking cable with a 0.5 m length
 CAB-STK-E-1M FlexStack stacking cable with a 1.0 m length
 CAB-STK-E-3M FlexStack stacking cable with a 3.0 m length

Console

Cisco Catalyst 2960-S console cables:

 CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
 CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors

Power

 The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC
 Use the supplied AC power cord to connect the AC power connector to an AC power outlet
 The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.
 Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle

Table 8. Management and Standards Support

Category

Specification

Management

 BRIDGE-MIB
 CISCO-CABLE-DIAG-MIB
 CISCO-CDP-MIB
 CISCO-CLUSTER-MIB
 CISCO-CONFIG-COPY-MIB
 CISCO-CONFIG-MAN-MIB
 CISCO-DHCP-SNOOPING-MIB
 CISCO-ENTITY-VENDORTYPE-OID-MIB
 CISCO-ENVMON-MIB
 CISCO-ERR-DISABLE-MIB
 CISCO-FLASH-MIB
 CISCO-FTP-CLIENT-MIB
 CISCO-IGMP-FILTER-MIB
 CISCO-IMAGE-MIB
 CISCO-IP-STAT-MIB
 CISCO-LAG-MIB
 CISCO-MAC-NOTIFICATION-MIB
 CISCO-MEMORY-POOL-MIB
 CISCO-PAGP-MIB
 CISCO-PING-MIB
 CISCO-POE-EXTENSIONS-MIB
 CISCO-PORT-QOS-MIB
 CISCO-PORT-SECURITY-MIB
 CISCO-PORT-STORM-CONTROL-MIB
 CISCO-PRODUCTS-MIB
 CISCO-PROCESS-MIB
 CISCO-RTTMON-MIB
 CISCO-SMI-MIB
 CISCO-STP-EXTENSIONS-MIB
 CISCO-SYSLOG-MIB
 CISCO-TC-MIB
 CICSO-TCP-MIB
 CISCO-UDLDP-MIB
 CISCO-VLAN-IFTABLE
 RELATIONSHIP-MIB
 CISCO-VLAN-MEMBERSHIP-MIB
 CISCO-VTP-MIB
 ENTITY-MIB
 ETHERLIKE-MIB
 IEEE8021-PAE-MIB
 IEEE8023-LAG-MIB
 IF-MIB
 INET-ADDRESS-MIB
 OLD-CISCO-CHASSIS-MIB
 OLD-CISCO-FLASH-MIB
 OLD-CISCO-INTERFACES-MIB
 OLD-CISCO-IP-MIB
 OLD-CISCO-SYS-MIB
 OLD-CISCO-TCP-MIB
 OLD-CISCO-TS-MIB
 RFC1213-MIB
 RMON-MIB
 RMON2-MIB
 SNMP-FRAMEWORK-MIB
 SNMP-MPD-MIB
 SNMP-NOTIFICATION-MIB
 SNMP-TARGET-MIB
 SNMPv2-MIB
 TCP-MIB
 UDP-MIB
 ePM MIB
 CISCO-STACKWISE-MIB (2960-S)

For an updated list of supported MIBs, refer to the MIB Locator athttp://www.cisco.com/go/mibs.

Standards

 IEEE 802.1D Spanning Tree Protocol
 IEEE 802.1p CoS Prioritization
 IEEE 802.1Q VLAN
 IEEE 802.1s
 IEEE 802.1w
 IEEE 802.1X
 IEEE 802.1ab (LLDP)
 IEEE 802.3ad
 IEEE 802.3af and IEEE 802.3at
 IEEE 802.3ah (100BASE-X single/multimode fiber only)
 IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
 IEEE 802.3 10BASE-T
 IEEE 802.3u 100BASE-TX
 IEEE 802.3ab 1000BASE-T
 IEEE 802.3z 1000BASE-X
 RMON I and II standards
 SNMP v1, v2c, and v3

RFC compliance

 RFC 768 - UDP
 RFC 783 - TFTP
 RFC 791 - IP
 RFC 792 - ICMP
 RFC 793 - TCP
 RFC 826 - ARP
 RFC 854 - Telnet
 RFC 951 - Bootstrap Protocol (BOOTP)
 RFC 959 - FTP
 RFC 1112 - IP Multicast and IGMP
 RFC 1157 - SNMP v1
 RFC 1166 - IP Addresses
 RFC 1256 - Internet Control Message Protocol (ICMP) Router Discovery
 RFC 1305 - NTP
 RFC 1492 - TACACS+
 RFC 1493 - Bridge MIB
 RFC 1542 - BOOTP extensions
 RFC 1643 - Ethernet Interface MIB
 RFC 1757 - RMON
 RFC 1901 - SNMP v2C
 RFC 1902-1907 - SNMP v2
 RFC 1981 - Maximum Transmission Unit (MTU) Path Discovery IPv6
 FRC 2068 - HTTP
 RFC 2131 - DHCP
 RFC 2138 - RADIUS
 RFC 2233 - IF MIB v3
 RFC 2373 - IPv6 Aggregatable Addrs
 RFC 2460 - IPv6
 RFC 2461 - IPv6 Neighbor Discovery
 RFC 2462 - IPv6 Autoconfiguration
 RFC 2463 - ICMP IPv6
 RFC 2474 - Differentiated Services (DiffServ) Precedence
 RFC 2597 - Assured Forwarding
 RFC 2598 - Expedited Forwarding
 RFC 2571 - SNMP Management
 RFC 3046 - DHCP Relay Agent Information Option
 RFC 3376 - IGMP v3
 RFC 3580 - 802.1X RADIUS

Table 9. Voltage and Power Ratings

Input Voltage and Current

Model

Voltage (Autoranging)

Current

Frequency

Cisco Catalyst 2960S-48FPD-L

100 to 240 VAC

9 to 4 A

50 to 60Hz

Cisco Catalyst 2960S-48LPD-L

5 to 2 A

Cisco Catalyst 2960S-24PD-L

5 to 2 A

Cisco Catalyst 2960S-48TD-L

1 to 0.5 A

Cisco Catalyst 2960S-24TD-L

1 to 0.5 A

Cisco Catalyst 2960S-48FPS-L

9 to 4 A

Cisco Catalyst 2960S-48LPS-L

5 to 2 A

Cisco Catalyst 2960S-24PS-L

5 to 2 A

Cisco Catalyst 2960S-48TS-L

1 to 0.5 A

Cisco Catalyst 2960S-24TS-L

1 to 0.5 A

Cisco Catalyst 2960S-48TS-S

100 to 240 VAC

1 to 0.5 A

50 to 60 Hz

Cisco Catalyst 2960S-24TS-S

100 to 240 VAC

1 to 0.5 A

50 to 60 Hz

Power Rating

Cisco Catalyst 2960S-48FPD-L

0.89 kVA

Cisco Catalyst 2960S-48LPD-L

0.48 kVA

Cisco Catalyst 2960S-24PD-L

0.46 kVA

Cisco Catalyst 2960S-48TD-L

0.09 kVA

Cisco Catalyst 2960S-24TD-L

0.09 kVA

Cisco Catalyst 2960S-48FPS-L

0.89 kVA

Cisco Catalyst 2960S-48LPS-L

0.48 kVA

Cisco Catalyst 2960S-24PS-L

0.46 kVA

Cisco Catalyst 2960S-48TS-L

0.13 kVA

Cisco Catalyst 2960S-24TS-L

0.09 kVA

Cisco Catalyst 2960S-48TS-S

0.13 kVA

Cisco Catalyst 2960S-24TS-S

0.08 kVA

DC Input Voltages (RPS Input)

Cisco Catalyst 2960S-48FPD-L

12V at 4 A

-52 V at 15 A

Cisco Catalyst 2960S-48LPD-L

12V at 4 A

-52 V at 8 A

Cisco Catalyst 2960S-24PD-L

12V at 3 A

-52 V at 8 A

Cisco Catalyst 2960S-48TD-L

12V at 4 A


Cisco Catalyst 2960S-24TD-L

12V at 3 A


Cisco Catalyst 2960S-48FPS-L

12V at 4 A

-52 V at 15A

Cisco Catalyst 2960S-48LPS-L

12V at 4 A

-52 V at 8 A

Cisco Catalyst 2960S-24PS-L

12V at 3 A

-52 V at 8 A

Cisco Catalyst 2960S-48TS-L

12V at 4 A

Cisco Catalyst 2960S-24TS-L

12V at 4 A






Table 10. Power Consumption

Measured Power Consumption*

Model

100 Percent Throughput

5 Percent Throughput

5 Percent Throughput (with 50 Percent PoE Loads)

100 Percent Throughput (with Maximum Possible PoE Loads)

Cisco Catalyst 2960S-48FPD-L

81

80

464 (386W PoE)

870 (744W PoE)

Cisco Catalyst 2960S-48LPD-L

71

70

266 (195W PoE)

466 (375W PoE)

Cisco Catalyst 2960S-24PD-L

55

54

249 (195W PoE)

451 (375W PoE)

Cisco Catalyst 2960S-48TD-L

55

53



Cisco Catalyst 2960S-24TD-L

39

38



Cisco Catalyst 2960S-48FPS-L

79

78

464 (386W PoE)

870 (744W PoE)

Cisco Catalyst 2960S-48LPS-L

71

70

266 (195W PoE)

466 (375W PoE)

Cisco Catalyst 2960S-24PS-L

55

54

249 (195W PoE)

449 (375W PoE)

Cisco Catalyst 2960S-48TS-L

52

50



Cisco Catalyst 2960S-24TS-L

40

39



Cisco Catalyst 2960S-48TS-S

53

50



Cisco Catalyst 2960S-24TS-S

36

36



* ATIS methodolog y
Disclaimer: All power consumption numbers were measured under controlled laboratory conditions and are provided as an estimate.
Note: The wattage rating on the power supply does not represent actual power draw. It indicates the maximum power draw possible by the power supply. This rating can be used for facility capacity planning. For PoE switches, cooling requirements are smaller than total power draw as a significant portion of the load is dissipated in the endpoints.

Table 11. Safety and Compliance

Category

Certifications

Safety certifications

 UL 60950-1, Second Edition
 CAN/CSA 22.2 No. 60950-1, Second Edition
 TUV/GS to EN 60950-1, Second Edition
 CB to IEC 60950-1 Second Edition with all country deviations
 CE Marking
 NOM (through partners and distributors)

Electromagnetic emissions (EMC)

 FCC Part 15 Class A
 EN 55022 Class A (CISPR22)
 EN 55024 (CISPR24)
 AS/NZS CISPR22 Class A
 CE
 CNS13438 Class A
 MIC
 GOST
 China EMC Certifications

Environmental

Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU

Telco

Common Language Equipment Identifier (CLEI) code

US Government Certifications

USGv6 and IPv6 Ready Logo

Cisco Enhanced Limited Lifetime Hardware Warranty

Cisco Catalyst 2960-S Series Switches come with an enhanced limited lifetime warranty (E-LLW). The E-LLW provides the same terms as Cisco’s standard limited lifetime warranty but adds next business day delivery of replacement hardware, where available, and 90 days of 8X5 Cisco Technical Assistance Center (TAC) support.

Your formal warranty statement, including the warranty applicable to Cisco software, appears in the Cisco information packet that accompanies your Cisco product. We encourage you to review carefully the warranty statement shipped with your specific product before use. Cisco reserves the right to refund the purchase price as its exclusive warranty remedy. For further information about warranty terms, visit http://www.cisco.com/go/warranty

Table 12. Warranty Terms

Cisco Enhanced Limited Lifetime Hardware Warranty

Device covered

Applies to all Cisco Catalyst 2960-S Series Switches

Warranty duration

As long as the original customer owns the product.

End-of-life policy

In the event of discontinuance of product manufacture, Cisco warranty support is limited to five (5) years from the announcement of discontinuance.

Hardware replacement

Cisco or its service center will use commercially reasonable efforts to ship a Cisco Catalyst 2960-S replacement part for next business day delivery, where available. Otherwise, a replacement will be shipped within ten (10) working days after the receipt of the RMA request. Actual delivery times may vary depending on customer location.

Effective date

Hardware warranty commences from the date of shipment to customer (and in case of resale by a Cisco reseller, not more than ninety [90] days after original shipment by Cisco).

TAC support

Cisco will provide during customer's local business hours, 8 hours per day, 5 days per week basic configuration, diagnosis, and troubleshooting of device-level problems for up to 90 days from the date of shipment of the originally purchased Cisco Catalyst 2960-S product. This support does not include solution or network-level support beyond the specific device under consideration.

Cisco.com Access

Warranty allows guest access only to Cisco.com

Software Update Policy

Customers with Cisco Catalyst LAN Base and LAN Lite software licenses will be provided with maintenance updates and bug fixes designed to maintain the compliance of the software with published specifications, release notes, and industry standards compliance as long as the original end user continues to own or use the product or up to one year from the end-of-sale date for this product, whichever occurs earlier.

This policy supersedes any previous warranty or software statement and is subject to change without notice.

Technical Support and Services

Table 13. Technical Services Available for Cisco Catalyst 2960-S Series Switches

Technical Services

Cisco SMARTnet Service

 Around-the-clock, global access to the Cisco TAC
 Unrestricted access to the extensive Cisco.com knowledge base and tools
 Next-business-day, 8x5x4, 24x7x4, or 24x7x2 advance hardware replacement and onsite parts replacement and installation available 1
 Ongoing operating system software updates within the licensed feature set 2
 Proactive diagnostics and real-time alerts on Smart Call Home enabled devices

Cisco Smart Foundation Service

 Next-business-day advance hardware replacement as available
 Access to SMB TAC during business hours (access levels vary by region)
 Access to Cisco.com SMB knowledge base
 Online technical resources through Smart Foundation Portal
 Operating system software bug fixes and patches

Cisco Smart Care Service

 Network-level coverage for the needs of small and medium-sized businesses
 Proactive health checks and periodic assessments of Cisco network foundation, voice, and security technologies
 Technical support for eligible Cisco hardware and software through Smart Care Portal
 Cisco operating system and application software updates and upgrades 2
 Next-business-day advance hardware replacement as available, 24x7x4 option available 1

Cisco SP Base Service

 Around-the-clock, global access to the Cisco TAC
 Registered access to Cisco.com
 Next-business-day, 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement. Return to factory option available 1
 Ongoing operating system software updates 2

Cisco Focused Technical Support Services

Three levels of premium, high-touch services are available:

 Cisco High-Touch Operations Management Service
 Cisco High-Touch Technical Support Service
 Cisco High-Touch Engineering Service

Valid Cisco SMARTnet or SP Base contracts are required on all network equipment.

1 Advance hardware replacement is available in various service-level combinations. For example, 8x5xNBD indicates that shipment will be initiated during the standard 8-hour business day, 5 days a week (the generally accepted business days within the relevant region), with next-business-day (NBD) delivery. Where NBD is not available, same day shipping is provided. Restrictions apply; please review the appropriate service descriptions for details.
2 Cisco operating system updates include the following: maintenance releases, minor updates, and major updates within the licensed feature set.

Ordering Information

Table 14. Cisco Catalyst 2960-S Series Switches Ordering Information

Part Number

10/100/1000 Ethernet Interfaces

Uplink Interfaces

Cisco IOS Software Feature Set

Available PoE Power

FlexStack Stacking

WS-C2960S-48FPD-L

48

2 SFP+

LAN Base

740W

Optional

WS-C2960S-48LPD-L

48

2 SFP+

LAN Base

370W

Optional

WS-C2960S-24PD-L

24

2 SFP+

LAN Base

370W

Optional

WS-C2960S-48TD-L

48

2 SFP+

LAN Base

-

Optional

WS-C2960S-24TD-L

24

2 SFP+

LAN Base

-

Optional

WS-C2960S-48FPS-L

48

4 SFP

LAN Base

740W

Optional

WS-C2960S-48LPS-L

48

4 SFP

LAN Base

370W

Optional

WS-C2960S-24PS-L

24

4 SFP

LAN Base

370W

Optional

WS-C2960S-48TS-L

48

4 SFP

LAN Base

-

Optional

WS-C2960S-24TS-L

24

4 SFP

LAN Base

-

Optional

WS-C2960S-48TS-S

48

2 SFP

LAN Lite

-

No

WS-C2960S-24TS-S

24

2 SFP

LAN Lite

-

No

Table 15. Cisco Catalyst 2960-S Accessories

Part Numbers

Description

C2960S-STACK

FlexStack hot-swappable stacking module

CAB-STK-E-0.5M

FlexStack stacking cable with a 0.5 m length

CAB-STK-E-1M

FlexStack stacking cable with a 1.0 m length

CAB-STK-E-3M

FlexStack stacking cable with a 3.0 m length

CAB-CONSOLE-RJ45

Console cable 6 ft with RJ45

CAB-CONSOLE-USB

Console cable 6 ft with USB Type A and mini-B connectors

RCKMNT-1RU=

Spare rack-mount kit for Cisco Catalyst 2960 and 2960-S Series for 19- and 24-inch racks

RCKMNT-REC-1RU=

1 RU recessed rack-mount kit for Cisco Catalyst 2960 and 2960-S Series

PWR-CLP

Power cable restraining clip

Table 16. Cisco Catalyst 2960-S Redundant Power Supply Options

Part Numbers

Description

PWR-RPS2300

Cisco Redundant Power System 2300 and blower, no power supply

BLNK-RPS2300=

Spare bay insert for Cisco Redundant Power System 2300 for Cisco Catalyst 2960 and Cisco Catalyst 2960-S switches

CAB-RPS2300-E=

Spare RPS2300 cable for Cisco Catalyst 2960-S switches

BLWR-RPS2300=

Spare 45 CFM blower for RPS 2300

C3K-PWR-750WAC=

RPS 2300 750W AC power supply spare for Cisco Catalyst 2960-S

For more information about the RPS-2300, visit http://www.cisco.com/en/US/products/ps7130/index.html.

Table 17. Cisco Catalyst 2960-S SFP Modules

SFP and SFP+ Modules

For the list of supported SFP and SFP+ modules, visithttp://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html.

Table 18. Power Cords for Cisco Catalyst 2960-S Series

Part Numbers

Description

CAB-16AWG-AC

AC Power Cord (US, Canada), C13, NEMA 5-15P, 2.5m

CAB-ACE

AC Power Cord (Europe), C13, CEE 7, 1.5m

CAB-L620P-C13-US

Power Cord, C13, NEMA L6-20, 2.5m

CAB-ACI

AC Power Cord (Italy), C13, CEI 23-16, 2.5m

CAB-ACU

AC Power Cord (UK), C13, BS 1363, 2.5m

CAB-ACA

AC Power Cord (China/Australia), C13, AS 3112, 2.5m

CAB-ACS

AC Power Cord (Switzerland), C13, IEC 60884-1, 2.5m

CAB-ACR

AC Power Cord (Argentina), C13, EL 219 (IRAM 2073), 2.5m

CAB-ACC

AC Power Cord (China), C13, PRC/3 GB2099/GB1002

CAB-JPN-12A

AC Power Cord (Japan), C13, Japan 2-prong, 1.8m

CAB-L620P-C13-JPN

AC Power Cord (Japan), C13, NEMA L6-20, JAPAN

CAB-IND-10A

AC Power Cord (India), C13, IS1293, 2.5m

CAB-ACBZ-12A

AC Power Cord (Brazil), C13, BR-3-20, 12A (FPS model)

CAB-ACBZ-10A

AC Power Cord (Brazil), C13, BR-3-20, 10A (all except FPS model)

CAB-AC15A-90L-US

AC Power Cord, United States, Left Angle

CAB-ACE-RA

AC Power Cord Europe, Right Angle

CAB-ACI-RA

AC Power Cord-Italian, Right Angle

CAB-ACU-RA

AC Power Cord UK, Right Angle

CAB-ACC-RA

AC Power Cord China, Right Angle

CAB-ACA-RA

AC Power Cord, Australian, Right Angle

CAB-ACS-RA

AC Power Cord for Switzerland, Right Angle

CAB-ACR-RA

AC Power Cord, Argentina, Right Angle

CAB-JPN-RA

AC Power Cord, Japan, Right Angle

CAB-ACB10A-RA

AC Power Cord, Brazil, Right Angle, 10A (all except FPS model)