Performance

3LCD Technology

A beamsplitting prism sends red, blue, and green light through three monochrome LCD displays to render a video image. 3LCD design features no moving parts in the imaging system, although there is still a cooling fan, and is free of the "rainbow effect" artifact sometimes perceived on color wheel-based systems.

2600 Lumens Color Brightness

This projector features both 2600 lumens white brightness and 2600 lumens color brightness. Some projectors only specify the white brightness in their lumens ratings, even though in many cases color portions of the image will be less bright than comparable gray scales. Determining the correct brightness for your applications requires taking into account the amount of ambient light (if any) in the room, the screen material used, the throw distance, and the content being shown.

1.3x Optical Zoom with 1.36 to 1.77:1 Throw Ratio

Throw ratio is one of the most important specifications a projector lens has as it tells you the image size (width) you will get at a give distance from the screen. For example, at the 1.16x zoom setting and a 10' 4" distance this projector will throw an 80"-wide (100"-diagonal) image.

16:10 Native Aspect Ratio

This projector features a 16:10 native aspect ratio. This is considered a widescreen format, and comes very close to the 16:9 standard of HDTV. This format is ideal if you plan to show HD video, and can still be used for presentations - though in the case of PowerPoints some extra space may be leftover on the sides. The projector can show 4:3 too; however black bars (pillaring) will have to be applied, or the image will have to be stretched or cropped to fit.

Up to 7,000 Hours Lamp Life

When used exclusively in Low Brightness Mode the lamp is estimated to last 7,000 hours.

Connectivity

Two USB Ports

Type B Female: Provides an alternative way of connecting the projector to a computer apart from HDMI or VGA. This features requires a USB cable (available separately) and the installation of USB Display software on the computer.

Type A Female: Allows you to display select still image formats such as JPEG and PNG from a FAT32-formatted flash drive or other USB media. This port also supports the installation of the optional IFU-WLM3 Wi-Fi adapter, available separately.

Network Presentation

Give presentations over a local network whether the projector is connected by wire or using the included IFU-WLM3 wireless USB dongle. With this feature you can project from any computer on your network. Because of LAN bandwidth limitations, this feature is intended for PowerPoint and other presentations comprised of largely static images.

Includes IFU-WLM3 Wi-Fi Dongle

Allows you to show content directly from compatible computers and mobile devices running the Sony Pixelworks app. Because this adapter depends on Wi-Fi bandwidth, wireless streaming is limited to still image formats including PowerPoint, JPEG, and PDF.

Ethernet Controllable

Operate remotely using a Web browser, PJLink-compatible software, or automation systems such as Crestron

Convenience

Auto Keystone Correction

Automatically adjust the picture to compensate for the trapezoidal "keystone" effect if the projector is placed vertically off-center relative to the screen. This is a digital process and may result in loss of detail if too much correction is applied.

"Off and Go"

Means the projector is ready to pack away almost as soon as you power it off - no waiting for the fan to complete its cooling cycle.

Energy-Saving

Auto Brightness Adjustment Function

Assesses the scene content to dynamically adjust lamp output - lower for darker scenes, higher for brighter scenes. It can also be set to automatically dim if no signal is detected for more than 10 seconds

Blanking

Cuts the screen to black either to bring focus back to the presenter or teacher or to save energy and lamp life without powering down fully. This can be switched on or off using a button the included IR remote.

Image Processing

12-Bit 3D Gamma Correction

12-bit 3D gamma correction circuitry maps luminance values from the incoming signal to render tonal (grayscale) gradation that is optimized for this projector

Film Mode

Integrated interlaced to progressive scan conversion helps ensure video plays back smoothly even if pull-down was used

Additional Features

Closed captioning support

Carrying case included

Image Display
Display System	3-Chip 0.59" / 14.99 mm LCD
Native Resolution	WXGA - 1280 x 800
Supported Resolutions	UXGA - 1600 x 1200
Supported Formats	Photo: BMP, GIF, JPEG, PNG, TIF
Format	NTSC 3.58, 4.43 PAL M, N SECAM
HDTV Compatibility	1920 x 1080p @ 60 fps 1920 x 1080p @ 50 fps 1920 x 1080i @ 60 fps 1920 x 1080i @ 50 fps 1280 x 720p @ 60 fps 1280 x 720p @ 50 fps 720 x 575p @ 50 fps 720 x 575i @ 50 fps 720 x 480p @ 60 fps 720 x 480i @ 60 fps
Brightness	High Brightness Mode: 2600 Lumens Low Brightness Mode: 1900 Lumens Low Brightness Mode: 1500 Lumens
Aspect Ratio	Native: 16:10 Supported: 16:9 Supported: 4:3
Contrast Ratio	2500:1
Scan	Horizontal: 15 - 92 Hz Vertical: 48 - 92 Hz

Lens
Focus	Manual
Zoom	Manual: 1.3x
Throw Ratio	1.36 - 1.77:1
Projection Size	30 - 300" / 76.20 - 762.00 cm

Features
Keystone Correction	Digital: Vertical: ± 20°
Ceiling Mountable	Yes
Rear Screen Projection	Yes
Built-In Speaker	Yes, 1 W (Mono)

Input/Output Connectors
Inputs/Outputs	1x 15-pin VGA Video (Input) 1x HDMI Audio/Video (Input) 1x RCA Composite Video (Input) 1x 1/8" (3.5 mm) Mini Audio (Input) 1x Ethernet LAN 1x USB 2.0 Type-A Female 1x USB 2.0 Type-B Female

General
Lamp (Bulb)	1x UHM
Watts	210 W
Life	Low Mode: 7000 Hours
Fan Noise	Not specified by manufacturer
Remote Control	Yes
Security	Cable Lock Slot
Power Requirements	100-240 VAC, 50/60 Hz
Power Consumption	Bright Mode: 294 W Normal Mode: 223 W Eco Mode: 197 W Standby Mode (Normal): 5.7 W Standby Mode (Eco): .4 W
Dimensions (WxHxD)	12.4 x 3.0 x 9.1" / 31.5 x 7.6 x 23.1 cm
Weight	5.8 lb / 2.6 kg