FOR SALE REPLACEMENT VISORS FOR BELL M4R/M5X HELMETS - BHV REF.NO. 576A.

THESE VISORS REPLACE THE ORIGINAL 3.0MM THICK VISORS WITH THE PART NUMBERS OP62 AND ARE 2.0MM THICK.

THESE VISORS ARE MADE FROM 2.0MM THICK POLYCARBONATE , THEY ARE NOT INJECTION MOULDED OR AS THICK OR AS HEAVY AS THE ORIGINAL VISOR, IF YOU WANT A VISOR THE SAME AS THE ORIGINAL THEN PLEASE DO NOT BUY THIS VISOR AND THEN COMPLAIN THAT IT IS THINNER OR FLIMSY .

THIS IS A BUY IT NOW FIXED PRICE LISTING FOR  REPLACEMENT VISORS TO FIT THE ABOVE HELMETS WHO  USE THE SAME VISOR AS STANDARD FITMENT. THE VISORS FEATURE THREE POSITION CURVED RATCHET SLOTS 

THESE VISORS ARE MADE IN THE U.K. BY BOB HEATH VISORS LTD FROM 2.0 MM THICK LEXAN POLYCARBONATE AND ARE A SINGLE CURVE VISOR . THEY OFFER A WEIGHT SAVING OVER THE ORIGINAL VISOR WITHOUT ANY LOSS OF STRENGTH/ IMPACT PROTECTION. THIS MATERIAL IS TESTED TO MEET THE  BSI STANDARD REQUIREMENTS OF A 6MM DIAMETER STEEL BALL BEING SHOT AT IT AT 267MPH AND WITHSTANDING THE IMPACT.

ALL OF THESE VISORS HAVE AN ABRASION RESISTANT COATING ONLY ON BOTH SURFACES APART FROM THE CLEAR AND LIGHT SMOKE ANTI FOGS  WHICH HAVE A FOG RESISTANT COATING ON THE INNER SURFACE. 

THE VISORS COME FITTED WITH TEAR OFF POSTS TO ALLOW THE FITTING OF TEAR OFFS ( BOB HEATH VISORS T011- OGK TYPE ) TO HELP PROLONG THE LIFE OF YOUR VISOR AND GIVE CLEARER VISION IN AN INSTANT SIMPLY BY TEARING A FILM FROM YOUR VISOR.

THE CLEAR AND LIGHT TINT SMOKE OPTIONS ARE ALL BSI APPROVED AND ARE U.K. ROAD LEGAL.

THE CLEAR OPTIONS OFFER 97% UV PROTECTION, AND THE LIGHT TINT AND DARK TINT SMOKE GIVE 100% UV PROTECTION.

PLEASE NOTE THAT THIS VISOR DOES NOT FIT THE EARLY BELL M5 HELMETS ,THE ORIGINAL VISOR FOR THESE HELMETS IS SHORTER AND DOES NOT FEATURE  THE THREE POSITION CURVED RATCHET SLOTS AND HAS A LOCK DOWN PEG HOLE ON THE BOTTOM EDGE. THESE HELMETS REQUIRE OUR BHV576 REPLACEMENT VISOR.

SEE THE PHOTO OF THE VISOR AND CHECK THAT IT IS THE CORRECT TYPE FOR YOUR HELMET.

TO PAY BY CREDIT CARD ,PLEASE CALL US ON 01922 614747 , UNFORTUNATELY WE DO NOT ACCEPT AMERICAN EXPRESS CARDS.

WE ARE OPEN MONDAY-FRIDAY 8.00AM - 4.00PM. CLOSED SATURDAY & SUNDAY.

PLEASE NOTE THE FOLLOWING INFORMATION FOR THE DARK TINT SMOKE COLOUR OPTION

THEY HAVE A LIGHT TRANSMISSION OF 20 % AND THEY GIVE 100 % U.V. LIGHT PROTECTION .

THE BHV DARK TINTED RACE VISOR IS NOT LEGAL FOR UK PUBLIC ROAD USE (AND POSSIBLY OTHER REGIONS).

THIS VISOR IS SUPPLIED FOR NON PUBLIC ROAD USE ONLY -SUCH AS CIRCUIT RACING, TRACK DAY USE OR ON PRIVATE ROADS.

IT IS YOUR SOLE RESPONSIBILITY TO KNOW THE LEGAL RESTRICTIONS FOR VISORS IN YOUR REGION.  WE CANNOT BE HELD LIABLE FOR ANY CONSEQUENCES ARISING FROM THE MISUSE OR ILLEGAL USE OF THIS PRODUCT.

ALL TINTED VISORS ARE RECOMMENDED FOR DAYTIME USE ONLY.

FOR ANY HELMET VISOR TO BE LEGAL FOR USE ON UK PUBLIC ROADS IT SHOULD BE TESTED AND CERTIFIED TO BRITISH STANDARD BS4110 OR CE MARKED.

BHV DARK RACE VISORS ARE MADE FROM ABRASION RESISTANT LEXAN POLYCARBONATE. THIS MATERIAL MEETS THE ABRASION RESISTANCE TEST, THE COLOUR RECOGNITION TEST  AND THE HIGHEST GRADE OF IMPACT RESISTANCE FOR BS4110 AS RECOMMENDED BY THE AUTO CYCLE UNION FOR ROAD RACING – WE OPTIONALLY HAVE OUR VISORS TESTED TO THE VERY HIGHEST IMPACT TEST STANDARD (ZZA) WHERE A 6MM STEEL BALL IS FIRED AT 120 METERS PER SECOND (267 MPH). 

THE LIGHT TRANSMISSION REQUIREMENT OF BS4110 (EYE PROTECTORS FOR VEHICLE USERS) FOR A VISOR TO CARRY THE KITEMARK IS A MINIMUM OF 50%. THIS BHV DARK RACE VISOR HAS A LIGHT TRANSMISSION OF APPROXIMATELY 20%. THIS FOLLOWS A RECOMMENDATION CONTAINED IN GUIDE  LINES OF BS2724 'GENERAL PURPOSE SUN GLARE EYE PROTECTORS' (FOR SUCH USAGES  AS DRIVING A CAR, SCHOOL BUS, TRUCK ETC) WHERE A LIGHT TRANSMISSION OF BETWEEN 18% AND 29% IS RECOMMENDED.  BECAUSE EYE PROTECTORS FOR VEHICLE USERS ARE NOT SUBJECT THE SAME SUN PROTECTION LEVELS AS 'GENERAL PURPOSE SUN GLARE EYE PROTECTORS THIS VISOR IS ILLEGAL TO USE ON A UK PUBLIC ROAD (AND POSSIBLY OTHER REGIONS). 

PLEASE BE AWARE THAT THERE ARE MANY VISORS BEING SOLD AS NOT FOR PUBLIC ROAD USE THAT HAVE NOT BEEN TESTED TO THE SAME HIGH STANDARDS THAT BHV DARK RACE VISORS HAVE OR IN SOME CASES NOT TESTED TO ANY STANDARD AT ALL!

WE URGE YOU TO CHECK BEFORE PURCHASING ANY EYE PROTECTOR (EVEN FOR NON PUBLIC ROAD USE) THAT IT HAS BEEN MADE TO OR TESTED TO A HIGH LEVEL OF PROTECTION – DO NOT PUT THE PROTECTION OF YOUR EYES IN A PRODUCT WHERE THE SELLER CAN NOT PROVIDE DETAILS OF TEST INFORMATION OR THE QUALITY OF THE PRODUCT. ENSURE TO ASK ‘HAS THIS PRODUCT BEEN IMPACT TESTED, IS IT ABRASION RESISTANT, DOES IT MEET COLOUR RECOGNITION TESTS AND WHAT IS THE LIGHT TRANSMISSION?’ THESE ARE IMPORTANT QUESTIONS THAT YOU SHOULD EXPECT ANY REPUTABLE SELLER TO BE ABLE PROVIDE ANSWERS TO.