The L-308S-U delivers accurate exposure readings in full, half, or third-stop increments. When set to full-stop mode, exposures are displayed in tenth-stop increments with a repeat accuracy of /- 0.1 EV. Reflected readings capture at a light receiving angle of about 40-degrees, or slightly wider than the viewing field of a normal lens. For incident readings, a small, built-in Lumisphere slides over the silicon diode sensor. For flat-field incident readings, a Luminism (included) snaps over the sensor for metering flat artwork or measuring contrast and/or exposure ratios within a scene. For cinema applications, the L-308S can be programmed to display exposure times from 8 to 128 frames-per-second. The Sekonic L-308S FLASHMATE comes with a Luminism (with pouch), a soft case, strap, and synchro terminal cap.
- Pocket-sized Digital Meter for Incident and Reflected Flash and Ambient Light Readings. Smallest digital flash-meter for reflective and incident light readings in ambient or electronic flash lighting conditions.
- Exposures accurate down to a tenth-of-a-stop for both ambient and electronic flash light readings in full-stop mode. Meter can also display shutter-speeds and apertures in half or third-stop increments to mirror the exposure settings on your camera.
- At ISO 100, the ambient EV range is 0 to 19.9, flash f/stops range from f/1.4 to f/90.9 with a shutter-speed span of 60-seconds to 1/8000th-of-a-second (1 sec to 1/500th for flash).
- Pocket-sized: 2.5"W x 4.3"H x 0.9"D (63mmW x 110mmH x 22mmD), and weighs 3.4 ounces
On Jun-30-17 at 13:33:42 PDT, seller added the following information:L-308S-U is the correct model number.
The model# in the title, L-308B, is wrong!