Detailed Description;

RO water purifications systems will reduce and eliminate TDS (total dissolved solids) like salts and minerals from our drinking water. However contrary to common beliefs, less than 1% of the organic minerals are actually found in most raw water supplies. With the increase of pollutants, our water supply contains mostly inorganic minerals. Inorganic minerals consist of calcium, iron, magnesium, carbonate and lime compounds, which are not compatible with our bodies. The body’s cells reject theses minerals leaving dissolved inorganic substances (acid crystals – minerals deposits) throughout the body. This accumulation of debris creates more work and trouble for the body, such as arthritis in joints, gallstones, kidney stones and mineral deposits in artery walls. Organic minerals that are considered soluble, which means the body absorbs sustenance into the cells, are found in our live foods such as fruits & vegetables. One glass of freshly squeezed orange juice would be higher in minerals than 30 gallons of untreated raw water. Purified water provides a necessary rinsing treatment for hydration purposes as our body is mostly fluid (over 80% water) and equally important to rinse impurities out of our body.

Drinking purified water both prevents inorganic minerals from entering our bodies and removes inorganic mineral deposits already there.

 

 

Reverse Osmosis System Membrane

remove/ reduce the following list of contaminants;

- Inorganic Organic Rejection - Adrazin >98% - Aldrin >98% - Aluminum >98% - Arsenic >98% - Barium >95% - Benzene >98% - Bicarbonate >99% - Cadmium >95% - Calcium >98% - Calcium Cloride >99% - Chlorine >98% - Chloride >95% - Chlorinated Pesticides >99% - Chloroform >98% - Chromium VI >98% - Copper >98% - Copper Sulfate CuSO4 >99% - Criptosporidium cysts >99% - DDT >99.9% - Dichloromethane >98% - DOT > 98% - E.coli bacteria >99.9%

- Endrin >98% - Fecal bacteria >99.9% - Fluoranthene >98% - Fluoride >95% - Ferro cyanide >97% - Giardia cysts >99% - Glucose >98% - Herbicides >98% - Iron >98% - Lead >98% - Lindane >98% - Magnesium >98% - Magnesium Cloride >99% - Manganese >98% - Mercury II >85% - Methoxychlor >98% - Nickel >98 - Nickel Sulphate NiSO4 >99% - Nitrate >90% - PCB >98% - Pesticides >98% - Perchlorethylene >98% - Phenol >98%

- Potassium >95% - Phosphate >95% - Selenium IV >95% - Silicate >95% - Silica SiO2 >98% - Silver >98% - Salmonella typhi >99.9% - Sodium >95% - Sodium Chloride NaCl >99% - Sodium Fluoride >99% - Sodium Nitrate NaNO3 >97% - Strontium >98% - Sulphate >98% - Tannic Acids >98% - Toluane 99.9% - Toxaphene >98% - Trichloroethylene >98% - Trihalomethanes >98% - Total Dissolved Solids >95% - Vibrio choleriae >99.8 - V.O.C.'s >98% - Zinc >98%

Specifications: • This system Provides bottled water quality with Mineral water Fresh tasting, up to 50 Gallons Per Day / 189.27 Litters per day. • Multiple uses: For your home quality fresh Drinking water, making your tasty coffee & tea, preparing foods, wash your fruitand vegetables, you can line to your home Refrigerator or ice maker (additional fitting & line tube is required), aquarium use or your special plants & many more... • Reduces: copper, lead, fluoride, cadmium, radium 226/228, selenium, arsenic, cysts (cryptosporidium, giardia, entamoeba & toxoplasm), barium, hexavalent chromium, trivalent chromium, copper, lead, fluoride, Odor, TDS many more. • Includes a high capacity 3.2 US Gallon / 12.11 Litter storage Tank. • Minimum rejection rate of 95% of TDS • Product to Waste Ratio: 1:3 Litters • Dimensions: RO Unit / 15"L x 6"D x 17"H; Storage Tank / 11" x 14" • Total Weight: Approx 25 lbs • Operation Temperature: 40°F to 104°F / Maximum temperature 40°C. • System Operating Pressure: 45PSI to 75PSI. - Lower than 45 PSI you must add booster pump + high pressure shut-off switch. - Higher than 75 PSI Add pressure control valve to fix the pressure @ 60 to 65 PSI. • Storage tank: 3.2 gallon (Storage capacity @ 60 PSI system pressure) Tank total volume 4.4 Gallon @ 100PSI Direct Feed. • System only to be used on biologically safe water supply. • Filter cartridges should be changed every 6 -12 months under domestic conditions. Varies & depend on the water source quality. To order filter set ( pre-filters and post filter ) please click here WF-RO5SKIT , filters and membrane are standard size.   Detailed Description:- All required fittings & instruction manuals are included to DIY your own installation. Warranty:- One Year Limited Warranty.

 

MAX WATER PRODUCT FEATURES:

	1st Stage / 5 Micron Polypropylene Sediment Filter To remove larger particles & suspended matter such as dirt, silt, rust, sand, algae,  sediment, scale particles,dirt and cloudiness from water. Replace every 6~12 months
	2nd Stage / T33 GAC Coconut Shell Carbon Filter Gives your water sweet taste & remove chlorine, pesticides, herbicides, bad taste & odours. Replace every 6~12 months or lasts 3,000 gallons
	3rd Stage / CTO Carbon Block - Model# ST-CTO To remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal. Replace every 6~12 months
	4th Stage /  TFC - Thin Film Membrane 50 GPD (MADE BY FILMTEC MEMBRANE MATERIAL / MADE IN USA) Tested and certified by NSF International against NSF / ANSI Standard 58 To remove particles down to 1/10,000 of a micron ( which is 98% of impurities including Organic and inorganic, chemicals). Replace every 2 years.       5th Stage / Mineral Water Filter The filter has yellow housing Replace every 12 months or lasts 1,500 gallons
	6th Stage / Inline T33 GAC Coconut Shell Carbon Filter Polishing GAC Post filter for a sweeter taste for the water and removes any taste or odour the water may have picked up while sitting in the tank. Replace every 6~12 months or lasts 1,500 gallons
	CE & NSF Certified durable 3.2 Gallon  Holding tank with Stainless Steel connection system      This RO Tank has been tested & certified by NSF international under NSF/ANSI standard 58 for material and structural integrity requirements   Features & Specification: ·      -  Model # RO-132 From PA-E Machinery Co. Ltd. ·     -  100 PSI Max Working Pressure. ·     -  Tank are Pre-Charged at 7 PSI. ·     -  1/4" stainless Steel Connection built for Reverse Osmosis water storage tank, pump            tank & thermal tank applications. ·     -  Brass Cap with internal O-Ring guarantees No Air from air vent. ·     -  Smooth internal air vent cap prevents diaphragm damaged. ·     -  Dimension: 14" Height , 11" Diameter ·     -  Capacity: Water Storage Capacity 3.2 Gallon    Specification Item No. Capacity (Gal) Connector Dimension Dimension Weight (kg) CUFT Height and Base Dia.(mm) RT-132 3.2 1/4" 350 279 4.3 1.02       Standard D1 faucet Long reach spout drinking faucet CP - Chrome Plated Non Air Gap - 1/4" Tube -1/4" Brass Mount is Included.
	Quality Calibrated Flow restrictor
	Auto Shut off valve Automatically shuts off when tank pressure reaches 65% of incoming line pressure. Once  tank fills 2/3 of RO water the valve will automatically shut down system. Save monthly over 1000 gallons of water and extend your water system membrane life.
	Feed Water Adapter & Ball Valve - Chrome Feed Water Adapter, 1/2"MIPx1/2"FIP,1/4"hole, & Feed Water Ball Valve 1/4 tube x 1/4"MIP For tapping into cold water supply           Drain Saddle Valve
	Check Valve 1/4"ODx1/8"MIP
	Tank Ball Valve 1/4" OD x 1/4" NPTF
	White Color 1/4" PE Tube, 5 Meters total length .
	10” standard  Housing Wrench

 

 

*******************************************************************************