E27 6W Dimmable LED Bulb 3000K-6500K White Light& 2.4G Touch Control Wireless Remote
high-performance remote controlLED bulb, adopting the wireless remote to
control the switch and adjust color temperature and brightness.
No extra wiring installation, simple and
convenient.
Adopting imported LED,and the power consumption of LED bulbs is 20% of the
traditional incandescent lamp. The life span of LED
bulbs is over 10 times longer than the fluorescent lamp. Easy to install, use.
Safe and stable. Intelligent ,energy saving, environmental protection.
The forging and stamping aluminum lamp body,to the maximum
extent,successfully solves the heat sink trouble by air backflow with increasing
more fins.Cover of LED bulb is made of PC and nanometer coolant,light
transmittance over 85%,light transmits evenly.
Technical Data
Remote
|
Size
|
110×52×20mm
|
Working voltage
|
3V AAAX2(not included)
|
Radio frequency
|
2400-2483.5MHz
|
Modulation mode
|
GFSK
|
Emission power
|
6db
|
Standby power consumption
|
5uA
|
Control distance
|
20~30 meters
|
Bulb
|
Size
|
60mmx123mm
|
LED Power
|
6 W
|
Working Temp
|
-40℃--60 ℃
|
LED Quantity
|
24pcs
|
LED Type
|
SAMSUNG 5630
|
Color temperature
|
3000K-6500K
|
Power factor
|
>0.65
|
CRI
|
>80
|
Light effect
|
110LM/W
|
Luminous flux(max)
|
560LM
|
Working voltage
|
AC86-265V 50/60HZ
|
Basic operation
1,Remote and LED Bulb programming(code matching& Group
Division)
Please confirm the bulb installation and power
connection.
Please choose the bulb which you want to program with the remote, then switch off the power,
please switch on the power again after 10 seconds, please press this key on the
upper side( channel-on) once( within
3 seconds) ,the moment you see the light is on. The bulb blinks three time when it’s done. Please
just repeat the above steps to program more bulbs with the remote
as needed.
Attention: One bulb can only be programmed to one group of
the same remote control ,and one remote can program to countless bulbs, but one
bulb can only programmed to four remotes (max).
2,Remote and
LED Bulb programming(code clearing& Group
Division )
You can change the previous settings and regroup the bulbs
as needed by rematching code. But you have to clear the address code before it.
please choose the bulb that you want
to clear the code , switch off the power and press the “all-on”-button or “channel-on” button 5 times within 3 seconds when you
switch it on again after 10 seconds. If the light blinks 6 times, it indicates
the code clearing is successful.
You can
match the code and regroup the bulbs as the code matching above.
3, Night light function
Press “all
off” button for a while,
all bulbs are switched into night light mode at the same time
Press “channel-off”
button of each group for a
while, all bulbs of this group are switched into night light mode at the same
time. Night light brightness is as 2 ‰ of the highest brightness .
Payment and shipping
We
only accept PayPal.
You're
expected to clear the payment within 7 days.
Please
contact us if any problem with payment,or unpaid dispute will be filed for
closing transaction after 7 days order placed!
Please
check the shipping address on your PayPal carefully before checkout, it can't
be changed once order completed,
We
are NOT responsible for any lost due to wrong address.
Item
will be post out within1working days after payment cleared.
To US: Epacket From China 7-12 work days Tracking number Available To Others: International Airmail 15-25 work days Tracking number Available
Please
note there will be a few days delay due to custom inspection sometimes(Contact
us if you don't get your order after 25 work days)!
All
items will be shipped out Buyer's Paypal Address, please confirm your address
on Paypal before you bid.
We
are not responsible for any custom duty incurred at foreign customs.
Return Policy
If
you have a defective item which you wish to return or exchange, please contact
us by Ebay message, then we will arrange replacement or refund for the
defective.
Please
rest your worry about our items quality, we have very strict QC system, even
you are not satisfied with any reason, we can replace you or refund you.
Buyer
is responsible for the return shipping charge.
Feedback
Our
system will automatically give you POSITIVE feedback when you paid.
It
is important that a Five Stars Positive feedback to be left for us. We want all
buyers happy with us!
DO
NOT leave any NEUTRAL or NEGATIVE feedback before communicating with us.
|