NAME: "NPE-G2 0", DESCR: "Cisco 7200 Series Network Processing Engine NPE-G2"

PID: NPE-G2            , VID: V03 , SN: JAB112902BK

NAME: "disk2", DESCR: "Compact Flash Disk for NPE-G1"

PID: Unknown Compact Flash, VID:    , SN:

NAME: "module 1", DESCR: "GigabitEthernet"

PID: PA-GE=            , VID:    , SN: 33163410

NAME: "module 2", DESCR: "GigabitEthernet"

PID: PA-GE=            , VID:    , SN: 35886005

NAME: "module 3", DESCR: "GigabitEthernet"

PID: PA-GE=            , VID:    , SN: 36537460

NAME: "module 4", DESCR: "GigabitEthernet"

PID: PA-GE=            , VID:    , SN: 35264773

NAME: "module 5", DESCR: "GigabitEthernet"

PID: PA-GE=            , VID:    , SN: 33565446

NAME: "module 6", DESCR: "GigabitEthernet"

PID: PA-GE=            , VID:    , SN: 34262151

NAME: "Power Supply 2", DESCR: "Cisco 7200 AC Power Supply"

PID: PWR-7200-AC       , VID:    , SN:

Router>sh ver

Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2013 by Cisco Systems, Inc.

Compiled Fri 13-Sep-13 19:12 by prod_rel_team

ROM: System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)

Router uptime is 20 minutes

System returned to ROM by power-on

System image file is "disk2:c7200p-adventerprisek9-mz.152-4.M5.bin"

Last reload reason: power-on

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.

Processor board ID 37052617

MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2

6 slot VXR midplane, Version 2.11

Last reset from power-on

PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.

Current configuration on bus mb1 has a total of 1200 bandwidth points.

The set of PA-2FE, PA-POS-2OC3, and I/O-2FE qualify for "half

bandwidth points" consideration, when full bandwidth point counting

results in oversubscription, under the condition that only one of the

two ports is used. With this adjustment, current configuration on bus

mb1 has a total of 1200 bandwidth points.

This configuration has oversubscripted the PCI bus and is not a

supported configuration.

PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.

Current configuration on bus mb2 has a total of 1200 bandwidth points.

The set of PA-2FE, PA-POS-2OC3, and I/O-2FE qualify for "half

bandwidth points" consideration, when full bandwidth point counting

results in oversubscription, under the condition that only one of the

two ports is used. With this adjustment, current configuration on bus

mb2 has a total of 1200 bandwidth points.

This configuration has oversubscripted the PCI bus and is not a

supported configuration.

Please refer to the following document "Cisco 7200 Series Port Adaptor

Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>

for c7200 bandwidth points oversubscription and usage guidelines.

WARNING: PCI bus mb1 Exceeds 600 bandwidth points

WARNING: PCI bus mb2 Exceeds 600 bandwidth points

1 FastEthernet interface

9 Gigabit Ethernet interfaces

2045K bytes of NVRAM.

500472K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2142

Router>